Tawk.to

PT.Mora Anugerah Berkat

PT.Mora Anugerah Berkat adalah perusahaan penyedia alat – alat laboratorium, alat laboratorium yang kami sediakan meliputi : general laboratorium equipment,medical equipment (alat kesehatan), environmental (alat uji lingkungan), chemical/reagent consumable,mineral/civil material testing dan kalibrasi.

About Us

Tampilkan postingan dengan label taber abrasion test test result. Tampilkan semua postingan

TABER TYPE ABRASION TESTER

TABER TYPE ABRASION TESTER


                          


TABER TYPE ABRASION TESTER


Jika anda membutuhkan/mencari peralatan pengujian material testing khususnya untuk Plastik, Rubber, Film, Polymer dan lain-lain, hubungi  PT. Mora Anugerah Berkat merupakan perusahaan yang menyediakan / mensupply alat uji seperti No.101 Taber Type Abrasion Tester  salah satunya dengan brand Yasuda Seiki Seisakusho Ltd.

  • Taber Type Abraser Test ASTM D4060 di Kota Tangerang 
  • Standard Method : JIS A1453, (K5400), K5600-5-8/9, K5665, K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM D1044, TAPPI-T476, JAS (JASO-M403), ISO 4649,5470-1, 7784-1/2, 
  • This tester is used to evaluate the abrading endurance of flat surface materials when they are abraded with an abrading wheel.
  • The operator is to place the abrading wheel to the rotating test specimen at a prescript load and abrade the test specimen.
  • After the test is finished, the operator is to measure the abraded mass, volume, thickness, and the optical difference of the test specimen.
  • This tester is widely used in testing plastic, rubber, decorative sheet, leather, paper, and paint surface.9352
  • Click Here : No.101-H Taber Type Abrasion Tester Brochure
  • Click Here : Plastic, Rubber, Film and Polymer Testing Equipment


Specification
ModelNo.101-H TABER TYPE ABRASION TESTER
Turn Tableφ150 mm
Table Rotation
Speed		60 ± 2 rpm, 70 ± 2 rpm,
72 ± 2 rpm
Weight Load2.45 N(250 gf), 4.9 N(500 gf), 9.8 N (1,000 gf)
Counter6 Digits Preset Counter
Suction NozzleInner φ8 mm: 2 pcs
OptionInlet Pressure Gauge,Safety Cover
AccessoriesAbrasion Wheel : 1 set (2 sets for No.101-H-2),
Thickness Guage : 2 pcs,
Weight(4.9N,9.8N) : 2 pcs each,
Suction Device (Vacuum Cleaner) : 1 set
Power Plug Adaptor : 1 pc
Power Source1 Hanging (No.101-H-1):
AC 100 V, 1-Phase, 15 A, 50/60 Hz
2 Hangings (No.101-H-2):
AC 100 V, 1-Phase, 20 A, 50/60 Hz
*2 outlets required
Dimensions /
Weight (Approx.)		1 Hanging (No.101-H-1):
W350 × D350 × H450 mm/ 25 kg
2 Hangings (No.101-H-2):
W700 × D350 × H510 mm/ 45 kg


TABER TYPE ABRASION TESTER



                          


No.101-K Sander (For Abrasion Wheel)
ToolDiamond
Rotation Speed1,300 rpm to 1,500 rpm (50 Hz)
1,550 rpm to 1,800 rpm (60 Hz)
AccessoriesPower Plug Adaptor: 1 pc
Power SourceAC 100 V, 1-Phase, 3 A, 50/60 Hz
Dimensions /
Weight (Approx.)		W210 × D330 × H380 mm/ 10 kg

==============================================

TABER TYPE ABRASION TESTER

  • Taber Type Abraser Test ASTM D4060 di Kota Tangerang

  • Standard Method : JIS A1453, (K5400), K5600-5-8/9, K5665, K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM D1044, TAPPI-T476, JAS (JASO-M403), ISO 4649, 5470-1, 7784-1/2, 9352

  • This is a tester with Wind Meter attached to No.101-H TABER TYPE ABRASION TESTER.

  • It sucks the abraded scrap during the test.

  • Not only that, it measures the air flow while sucking so it enables to have more precise test result.

  • Click Here : No.101-HS Taber Type Abrasion Tester Brochure

  • Click Here : Plastic, Rubber, Film and Polymer Testing Equipment




ModelNo.101-HS TABER TYPE ABRASION TESTER
(WITH WIND METER)
Turn Tableφ150 mm
Table Rotation
Speed		60 ± 2 rpm, 70 ± 2 rpm, 72 ± 2 rpm
Weight Load2.45 N(250 gf), 4.9 N (500 gf),
9.8 N (1,000 gf)
Counter6 Digits Preset Counter
Suction NozzleInner φ8 mm: 2 pcs
OptionSafety Cover
AccessoriesAbrasion Wheel : 1 set (2 sets for No.101-H-2),
Thickness Guage : 2 pcs,
Weight(4.9N,9.8N) : 2 pcs each,
Suction Device (Vacuum Cleaner) : 1 set
Power Plug Adaptor : 1 pc
Power SourceAC 100 V, 1-Phase, 15 A, 50/60 Hz
Dimensions /
Weight (Approx.)		W400 × D400 × H385 mm/ 25 kg


Berikut adalah link / tautan produk catalog yang kami miliki seperti dibawah ini :  

  1. Click Here : Yasuda Seiki : Plastic, Rubber, Tape & Polymer Catalog

  2. Click Here : Yasuda Seiki : Electric Wire and Cable Catalog

  3. Click Here : Yasuda Seiki : Leather, Vinyl Leather Cloth Catalog

  4. Click Here : Yasuda Seiki : Paper,Pulp Catalog

  5. Click Here : Drick Instrument : Industrial Testing Instrument Catalog 

  6. Click Here : Cell Instrument : Plastic, Rubber, Tape & Polymer Catalog

  7. Click Here : Testex Instrument Fabric,Garment & Textile Catalog


TABER TYPE ABRASION TESTER

Kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.
  • PT. Mora Anugerah Berkat (M.A.B)
  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan, Kota Tangerang - Provinsi Banten
  • Phone : 021 7345.7064
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat : Whats App, Line, WeChat, Telegram
  • Website : www.moraanugerah.id -
  • www.moraanugerah.com
  • Email : info@moraanugerah.com -
  • info@moraanugerah.id -
  • marketing_div@moraanugerah.com

Model No.101-HS Taber Type Abrasion Tester di Sukabumi

Model No.101-HS Taber Type Abrasion Tester  di Sukabumi


                          



Model No.101-HS Taber Type Abrasion Tester  di Sukabumi 


Jika anda membutuhkan/mencari peralatan pengujian material testing khususnya untuk Plastik, Rubber, Film, Polymer dan lain-lain, hubungi  PT. Mora Anugerah Berkat merupakan perusahaan yang menyediakan / mensupply alat uji seperti No.101 Taber Type Abrasion Tester  salah satunya dengan brand Yasuda Seiki Seisakusho Ltd.


  • No.101-H TABER TYPE ABRASION TESTER
  • Standard Method : JIS A1453, (K5400), K5600-5-8/9, K5665, K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM D1044, TAPPI-T476, JAS (JASO-M403), ISO 4649,5470-1, 7784-1/2, 
  • This tester is used to evaluate the abrading endurance of flat surface materials when they are abraded with an abrading wheel.
  • The operator is to place the abrading wheel to the rotating test specimen at a prescript load and abrade the test specimen.
  • After the test is finished, the operator is to measure the abraded mass, volume, thickness, and the optical difference of the test specimen.
  • This tester is widely used in testing plastic, rubber, decorative sheet, leather, paper, and paint surface.9352
  • Click Here : No.101-H Taber Type Abrasion Tester Brochure
  • Click Here : Plastic, Rubber, Film and Polymer Testing Equipment


Specification
ModelNo.101-H TABER TYPE ABRASION TESTER
Turn Tableφ150 mm
Table Rotation
Speed		60 ± 2 rpm, 70 ± 2 rpm,
72 ± 2 rpm
Weight Load2.45 N(250 gf), 4.9 N(500 gf), 9.8 N (1,000 gf)
Counter6 Digits Preset Counter
Suction NozzleInner φ8 mm: 2 pcs
OptionInlet Pressure Gauge,Safety Cover
AccessoriesAbrasion Wheel : 1 set (2 sets for No.101-H-2),
Thickness Guage : 2 pcs,
Weight(4.9N,9.8N) : 2 pcs each,
Suction Device (Vacuum Cleaner) : 1 set
Power Plug Adaptor : 1 pc
Power Source1 Hanging (No.101-H-1):
AC 100 V, 1-Phase, 15 A, 50/60 Hz
2 Hangings (No.101-H-2):
AC 100 V, 1-Phase, 20 A, 50/60 Hz
*2 outlets required
Dimensions /
Weight (Approx.)		1 Hanging (No.101-H-1):
W350 × D350 × H450 mm/ 25 kg
2 Hangings (No.101-H-2):
W700 × D350 × H510 mm/ 45 kg


Model No.101-HS Taber Type Abrasion Tester  di Sukabumi


                                    


No.101-K Sander (For Abrasion Wheel)
ToolDiamond
Rotation Speed1,300 rpm to 1,500 rpm (50 Hz)
1,550 rpm to 1,800 rpm (60 Hz)
AccessoriesPower Plug Adaptor: 1 pc
Power SourceAC 100 V, 1-Phase, 3 A, 50/60 Hz
Dimensions /
Weight (Approx.)		W210 × D330 × H380 mm/ 10 kg

==============================================

Model No.101-HS Taber Type Abrasion Tester  di Sukabumi

  • No.101-HS TABER TYPE ABRASION TESTER (WITH WIND METER)

  • Standard Method : JIS A1453, (K5400), K5600-5-8/9, K5665, K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM D1044, TAPPI-T476, JAS (JASO-M403), ISO 4649, 5470-1, 7784-1/2, 9352

  • This is a tester with Wind Meter attached to No.101-H TABER TYPE ABRASION TESTER.

  • It sucks the abraded scrap during the test.

  • Not only that, it measures the air flow while sucking so it enables to have more precise test result.

  • Click Here : No.101-HS Taber Type Abrasion Tester Brochure

  • Click Here : Plastic, Rubber, Film and Polymer Testing Equipment




Model
No.101-HS TABER TYPE ABRASION TESTER
(WITH WIND METER)
Turn Tableφ150 mm
Table Rotation
Speed		60 ± 2 rpm, 70 ± 2 rpm, 72 ± 2 rpm
Weight Load2.45 N(250 gf), 4.9 N (500 gf),
9.8 N (1,000 gf)
Counter6 Digits Preset Counter
Suction NozzleInner φ8 mm: 2 pcs
OptionSafety Cover
AccessoriesAbrasion Wheel : 1 set (2 sets for No.101-H-2),
Thickness Guage : 2 pcs,
Weight(4.9N,9.8N) : 2 pcs each,
Suction Device (Vacuum Cleaner) : 1 set
Power Plug Adaptor : 1 pc
Power SourceAC 100 V, 1-Phase, 15 A, 50/60 Hz
Dimensions /
Weight (Approx.)		W400 × D400 × H385 mm /
25 kg


Berikut adalah link / tautan produk catalog yang kami miliki seperti dibawah ini :  

  1. Click Here : Yasuda Seiki : Plastic, Rubber, Tape & Polymer Catalog

  2. Click Here : Yasuda Seiki : Electric Wire and Cable Catalog

  3. Click Here : Yasuda Seiki : Leather, Vinyl Leather Cloth Catalog

  4. Click Here : Yasuda Seiki : Paper,Pulp Catalog

  5. Click Here : Drick Instrument : Industrial Testing Instrument Catalog 

  6. Click Here : Cell Instrument : Plastic, Rubber, Tape & Polymer Catalog

  7. Click Here : Testex Instrument Fabric,Garment & Textile Catalog


Model No.101-HS Taber Type Abrasion Tester  di Sukabumi

Kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.
  • PT. Mora Anugerah Berkat (M.A.B)
  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan, Kota Tangerang - Provinsi Banten
  • Phone : 021 7345.7064
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat : Whats App, Line, WeChat, Telegram
  • Website : www.moraanugerah.id -
  • www.moraanugerah.com
  • Email : info@moraanugerah.com -
  • info@moraanugerah.id -
  • marketing_div@moraanugerah.com

Taber Type Abraser Test ASTM D4060 di Kota Tangerang

Taber Type Abraser Test ASTM D4060 di Kota Tangerang


                 



Taber Type Abraser Test ASTM D4060 di Kota Tangerang


Jika anda membutuhkan/mencari peralatan pengujian material testing khususnya untuk Plastik, Rubber, Film, Polymer dan lain-lain, hubungi  PT. Mora Anugerah Berkat merupakan perusahaan yang menyediakan / mensupply alat uji seperti No.101 Taber Type Abrasion Tester  salah satunya dengan brand Yasuda Seiki Seisakusho Ltd.


  • No.101-H TABER TYPE ABRASION TESTER
  • Standard Method : JIS A1453, (K5400), K5600-5-8/9, K5665, K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM D1044, TAPPI-T476, JAS (JASO-M403), ISO 4649,5470-1, 7784-1/2, 
  • This tester is used to evaluate the abrading endurance of flat surface materials when they are abraded with an abrading wheel.
  • The operator is to place the abrading wheel to the rotating test specimen at a prescript load and abrade the test specimen.
  • After the test is finished, the operator is to measure the abraded mass, volume, thickness, and the optical difference of the test specimen.
  • This tester is widely used in testing plastic, rubber, decorative sheet, leather, paper, and paint surface.9352
  • Click Here : No.101-H Taber Type Abrasion Tester Brochure
  • Click Here : Plastic, Rubber, Film and Polymer Testing Equipment


Specification
ModelNo.101-H TABER TYPE ABRASION TESTER
Turn Tableφ150 mm
Table Rotation
Speed		60 ± 2 rpm, 70 ± 2 rpm,
72 ± 2 rpm
Weight Load2.45 N(250 gf), 4.9 N(500 gf), 9.8 N (1,000 gf)
Counter6 Digits Preset Counter
Suction NozzleInner φ8 mm: 2 pcs
OptionInlet Pressure Gauge,Safety Cover
AccessoriesAbrasion Wheel : 1 set (2 sets for No.101-H-2),
Thickness Guage : 2 pcs,
Weight(4.9N,9.8N) : 2 pcs each,
Suction Device (Vacuum Cleaner) : 1 set
Power Plug Adaptor : 1 pc
Power Source1 Hanging (No.101-H-1):
AC 100 V, 1-Phase, 15 A, 50/60 Hz
2 Hangings (No.101-H-2):
AC 100 V, 1-Phase, 20 A, 50/60 Hz
*2 outlets required
Dimensions /
Weight (Approx.)		1 Hanging (No.101-H-1):
W350 × D350 × H450 mm/ 25 kg
2 Hangings (No.101-H-2):
W700 × D350 × H510 mm/ 45 kg


Taber Type Abraser Test ASTM D4060 di Kota Tangerang


                                    


No.101-K Sander (For Abrasion Wheel)
ToolDiamond
Rotation Speed1,300 rpm to 1,500 rpm (50 Hz)
1,550 rpm to 1,800 rpm (60 Hz)
AccessoriesPower Plug Adaptor: 1 pc
Power SourceAC 100 V, 1-Phase, 3 A, 50/60 Hz
Dimensions /
Weight (Approx.)		W210 × D330 × H380 mm/ 10 kg

==============================================

Taber Type Abraser Test ASTM D4060 di Kota Tangerang

  • No.101-HS TABER TYPE ABRASION TESTER (WITH WIND METER)

  • Standard Method : JIS A1453, (K5400), K5600-5-8/9, K5665, K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM D1044, TAPPI-T476, JAS (JASO-M403), ISO 4649, 5470-1, 7784-1/2, 9352

  • This is a tester with Wind Meter attached to No.101-H TABER TYPE ABRASION TESTER.

  • It sucks the abraded scrap during the test.

  • Not only that, it measures the air flow while sucking so it enables to have more precise test result.

  • Click Here : No.101-HS Taber Type Abrasion Tester Brochure

  • Click Here : Plastic, Rubber, Film and Polymer Testing Equipment




Model
No.101-HS TABER TYPE ABRASION TESTER
(WITH WIND METER)
Turn Tableφ150 mm
Table Rotation
Speed		60 ± 2 rpm, 70 ± 2 rpm, 72 ± 2 rpm
Weight Load2.45 N(250 gf), 4.9 N (500 gf),
9.8 N (1,000 gf)
Counter6 Digits Preset Counter
Suction NozzleInner φ8 mm: 2 pcs
OptionSafety Cover
AccessoriesAbrasion Wheel : 1 set (2 sets for No.101-H-2),
Thickness Guage : 2 pcs,
Weight(4.9N,9.8N) : 2 pcs each,
Suction Device (Vacuum Cleaner) : 1 set
Power Plug Adaptor : 1 pc
Power SourceAC 100 V, 1-Phase, 15 A, 50/60 Hz
Dimensions /
Weight (Approx.)		W400 × D400 × H385 mm /
25 kg


Berikut adalah link / tautan produk catalog yang kami miliki seperti dibawah ini :  

  1. Click Here : Yasuda Seiki : Plastic, Rubber, Tape & Polymer Catalog

  2. Click Here : Yasuda Seiki : Electric Wire and Cable Catalog

  3. Click Here : Yasuda Seiki : Leather, Vinyl Leather Cloth Catalog

  4. Click Here : Yasuda Seiki : Paper,Pulp Catalog

  5. Click Here : Drick Instrument : Industrial Testing Instrument Catalog 

  6. Click Here : Cell Instrument : Plastic, Rubber, Tape & Polymer Catalog

  7. Click Here : Testex Instrument Fabric,Garment & Textile Catalog


Taber Type Abraser Test ASTM D4060 di Kota Tangerang

Kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.
  • PT. Mora Anugerah Berkat (M.A.B)
  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan, Kota Tangerang - Provinsi Banten
  • Phone : 021 7345.7064
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat : Whats App, Line, WeChat, Telegram
  • Website : www.moraanugerah.id -
  • www.moraanugerah.com
  • Email : info@moraanugerah.com -
  • info@moraanugerah.id -
  • marketing_div@moraanugerah.com
Langganan: Postingan (Atom)