Tawk.to

PT.Mora Anugerah Berkat adalah perusahaan penyedia alat – alat laboratorium, alat laboratorium yang kami sediakan meliputi : general laboratorium equipment,medical equipment (alat kesehatan), environmental (alat uji lingkungan), chemical/reagent consumable,mineral/civil material testing dan kalibrasi.

About Us

Tampilkan postingan dengan label heat seal test method. Tampilkan semua postingan

Heat Seal Temperature of Polyethylene

  




Heat Seal Temperature of Polyethylene 

Heat Seal Tester is professionally designed for the precise measurement of sealing temperature, time and pressure. Heat Seal Tester is for the determination of the heat sealability of a surface, or sealant layer of films, laminates, composites and polymers etc.

How well the material heat seals is expressed quantitatively as seal strength as a function of the sealing conditions of temperature, time and pressure.

Heat Seal Tester complies with ASTM F2029 “Standard Practices for Making Heatseals for Determi-nation of Heat sealability of Flexible Webs as Measured by Seal Strength ”



Principle

Place a sample between two-heated sealing jaws of Heat Seal Tester with flat surfaces when the required temperature reaches equilibrium. The upper seal jaw, driven by a gas cylinder, is pushed down, to exert a certain pressure on the sample and remain for some time. When the preset sealing time ends, the upper sealing jaw returns to its original position and the whole heatsealability testing process finishes.

Heat Seal Temperature of Polyethylene 


Technical Data

  • CLICK HERE : Heat Seal Tester Brochure

  • Sealing Temperature : Room Temperature ~ 300°C

  • Deviation : ± 0.2°C

  • Dwell time : 0.1 s~9999s

  • Sealing pressure : 0.15 MPa ~ 0.7 MPa

  • Sealing Jaws : 330 mm × 10 mm (Sealing Surface)(Customization Available)

  • Gas Pressure : 0.7 MPa of Air

  • Dimensions : 455 mm (L) x 320 mm (W) x 440 mm (H) 

  • Port Size : Ф6 mm PU Hose

  • 7 inch TFT touching

  • PLC control

  • P.I.D. temperature control 

  • Data saving


PT. Mora Anugerah Berkat adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan laboratorium khususnya industrial material testing diantaranya adalah Heat Seal Temperature of Polyethylene, kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China,produk internasional yang kami supply/tawarkan seperti : Yasuda Seiki,RDM Test Equipment,Qualitest, Drick Instrument, Testex Instrument dan masih banyak lagi. kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.

Heat Seal Temperature of Polyethylene 

  • PT. Mora Anugerah Berkat (M.A.B)
  • CLICK HERE : Heat Seal Tester Brochure
  • Alamat : JL.Taman Asri Blok M No.36 Kel.Cipadu                     Kec.Larangan,Kota Tangerang - Provinsi Banten
  • Phone  : 021 7345.7064 / 7366.0160
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat   : Whats App, Line, We Chat, Telegram
  • Website: www.moraanugerah.id  -  www.moraanugerah.com
  • Email  : marketing_div@moraanugerah.com -                         info@moraanugerah.com - info@moraanugerah.id 

Heat Sealing Films

  




Heat Sealing Films

Heat Seal Tester is professionally designed for the precise measurement of sealing temperature, time and pressure. Heat Seal Tester is for the determination of the heat sealability of a surface, or sealant layer of films, laminates, composites and polymers etc.

How well the material heat seals is expressed quantitatively as seal strength as a function of the sealing conditions of temperature, time and pressure.

Heat Seal Tester complies with ASTM F2029 “Standard Practices for Making Heatseals for Determi-nation of Heat sealability of Flexible Webs as Measured by Seal Strength ”



Principle

Place a sample between two-heated sealing jaws of Heat Seal Tester with flat surfaces when the required temperature reaches equilibrium. The upper seal jaw, driven by a gas cylinder, is pushed down, to exert a certain pressure on the sample and remain for some time. When the preset sealing time ends, the upper sealing jaw returns to its original position and the whole heatsealability testing process finishes.

Heat Sealing Films


Technical Data

  • CLICK HERE : Heat Seal Tester Brochure

  • Sealing Temperature : Room Temperature ~ 300°C

  • Deviation : ± 0.2°C

  • Dwell time : 0.1 s~9999s

  • Sealing pressure : 0.15 MPa ~ 0.7 MPa

  • Sealing Jaws : 330 mm × 10 mm (Sealing Surface)(Customization Available)

  • Gas Pressure : 0.7 MPa of Air

  • Dimensions : 455 mm (L) x 320 mm (W) x 440 mm (H) 

  • Port Size : Ф6 mm PU Hose

  • 7 inch TFT touching

  • PLC control

  • P.I.D. temperature control 

  • Data saving


PT. Mora Anugerah Berkat adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan laboratorium khususnya industrial material testing diantaranya adalah Heat Sealing Films, kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China,produk internasional yang kami supply/tawarkan seperti : Yasuda Seiki,RDM Test Equipment,Qualitest, Drick Instrument, Testex Instrument dan masih banyak lagi. kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.

Heat Sealing Films

  • PT. Mora Anugerah Berkat (M.A.B)
  • CLICK HERE : Heat Seal Tester Brochure
  • Alamat : JL.Taman Asri Blok M No.36 Kel.Cipadu                     Kec.Larangan,Kota Tangerang - Provinsi Banten
  • Phone  : 021 7345.7064 / 7366.0160
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat   : Whats App, Line, We Chat, Telegram
  • Website: www.moraanugerah.id  -  www.moraanugerah.com
  • Email  : marketing_div@moraanugerah.com -                         info@moraanugerah.com - info@moraanugerah.id 

[HST-02] Heat Seal Strength of Plastic Films

  




[HST-02] Heat Seal Strength of Plastic Films

Heat Seal Tester is professionally designed for the precise measurement of sealing temperature, time and pressure. Heat Seal Tester is for the determination of the heat sealability of a surface, or sealant layer of films, laminates, composites and polymers etc.

How well the material heat seals is expressed quantitatively as seal strength as a function of the sealing conditions of temperature, time and pressure.

Heat Seal Tester complies with ASTM F2029 “Standard Practices for Making Heatseals for Determi-nation of Heat sealability of Flexible Webs as Measured by Seal Strength ”



Principle

Place a sample between two-heated sealing jaws of Heat Seal Tester with flat surfaces when the required temperature reaches equilibrium. The upper seal jaw, driven by a gas cylinder, is pushed down, to exert a certain pressure on the sample and remain for some time. When the preset sealing time ends, the upper sealing jaw returns to its original position and the whole heatsealability testing process finishes.

[HST-02] Heat Seal Strength of Plastic Films


Technical Data

  • CLICK HERE : Heat Seal Tester Brochure

  • Sealing Temperature : Room Temperature ~ 300°C

  • Deviation : ± 0.2°C

  • Dwell time : 0.1 s~9999s

  • Sealing pressure : 0.15 MPa ~ 0.7 MPa

  • Sealing Jaws : 330 mm × 10 mm (Sealing Surface)(Customization Available)

  • Gas Pressure : 0.7 MPa of Air

  • Dimensions : 455 mm (L) x 320 mm (W) x 440 mm (H) 

  • Port Size : Ф6 mm PU Hose

  • 7 inch TFT touching

  • PLC control

  • P.I.D. temperature control 

  • Data saving


PT. Mora Anugerah Berkat adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan laboratorium khususnya industrial material testing diantaranya adalah [HST-02] Heat Seal Strength of Plastic Films, kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China,produk internasional yang kami supply/tawarkan seperti : Yasuda Seiki,RDM Test Equipment,Qualitest, Drick Instrument, Testex Instrument dan masih banyak lagi. kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.

[HST-02] Heat Seal Strength of Plastic Films

  • PT. Mora Anugerah Berkat (M.A.B)
  • CLICK HERE : Heat Seal Tester Brochure
  • Alamat : JL.Taman Asri Blok M No.36 Kel.Cipadu                     Kec.Larangan,Kota Tangerang - Provinsi Banten
  • Phone  : 021 7345.7064 / 7366.0160
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat   : Whats App, Line, We Chat, Telegram
  • Website: www.moraanugerah.id  -  www.moraanugerah.com
  • Email  : marketing_div@moraanugerah.com -                         info@moraanugerah.com - info@moraanugerah.id 

[HST-01] Heat Seal Strength Test Method

  




[HST-01] Heat Seal Strength Test Method

Heat Seal Tester is professionally designed for the precise measurement of sealing temperature, time and pressure. Heat Seal Tester is for the determination of the heat sealability of a surface, or sealant layer of films, laminates, composites and polymers etc.

How well the material heat seals is expressed quantitatively as seal strength as a function of the sealing conditions of temperature, time and pressure.

Heat Seal Tester complies with ASTM F2029 “Standard Practices for Making Heatseals for Determi-nation of Heat sealability of Flexible Webs as Measured by Seal Strength ”



Principle

Place a sample between two-heated sealing jaws of Heat Seal Tester with flat surfaces when the required temperature reaches equilibrium. The upper seal jaw, driven by a gas cylinder, is pushed down, to exert a certain pressure on the sample and remain for some time. When the preset sealing time ends, the upper sealing jaw returns to its original position and the whole heatsealability testing process finishes.

[HST-01] Heat Seal Strength Test Method

Technical Data

  • CLICK HERE : Heat Seal Tester Brochure

  • Sealing Temperature : Room Temperature ~ 300°C

  • Deviation : ± 0.2°C

  • Dwell time : 0.1 s~9999s

  • Sealing pressure : 0.15 MPa ~ 0.7 MPa

  • Sealing Jaws : 330 mm × 10 mm (Sealing Surface)(Customization Available)

  • Gas Pressure : 0.7 MPa of Air

  • Dimensions : 455 mm (L) x 320 mm (W) x 440 mm (H) 

  • Port Size : Ф6 mm PU Hose

  • 7 inch TFT touching

  • PLC control

  • P.I.D. temperature control 

  • Data saving


PT. Mora Anugerah Berkat adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan laboratorium khususnya industrial material testing diantaranya adalah [HST-01] Heat Seal Strength Test Method, kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China,produk internasional yang kami supply/tawarkan seperti : Yasuda Seiki,RDM Test Equipment,Qualitest, Drick Instrument, Testex Instrument dan masih banyak lagi. kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.

[HST-01] Heat Seal Strength Test Method

  • PT. Mora Anugerah Berkat (M.A.B)
  • CLICK HERE : Heat Seal Tester Brochure
  • Alamat : JL.Taman Asri Blok M No.36 Kel.Cipadu                     Kec.Larangan,Kota Tangerang - Provinsi Banten
  • Phone  : 021 7345.7064 / 7366.0160
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat   : Whats App, Line, We Chat, Telegram
  • Website: www.moraanugerah.id  -  www.moraanugerah.com
  • Email  : marketing_div@moraanugerah.com -                         info@moraanugerah.com - info@moraanugerah.id 

Heat Seal Strength Test Method

  




Heat Seal Strength Test Method

Heat Seal Tester is professionally designed for the precise measurement of sealing temperature, time and pressure. Heat Seal Tester is for the determination of the heat sealability of a surface, or sealant layer of films, laminates, composites and polymers etc.

How well the material heat seals is expressed quantitatively as seal strength as a function of the sealing conditions of temperature, time and pressure.

Heat Seal Tester complies with ASTM F2029 “Standard Practices for Making Heatseals for Determi-nation of Heat sealability of Flexible Webs as Measured by Seal Strength ”



Principle

Place a sample between two-heated sealing jaws of Heat Seal Tester with flat surfaces when the required temperature reaches equilibrium. The upper seal jaw, driven by a gas cylinder, is pushed down, to exert a certain pressure on the sample and remain for some time. When the preset sealing time ends, the upper sealing jaw returns to its original position and the whole heatsealability testing process finishes.

Heat Seal Strength Test Method


Technical Data

  • CLICK HERE : Heat Seal Tester Brochure

  • Sealing Temperature : Room Temperature ~ 300°C

  • Deviation : ± 0.2°C

  • Dwell time : 0.1 s~9999s

  • Sealing pressure : 0.15 MPa ~ 0.7 MPa

  • Sealing Jaws : 330 mm × 10 mm (Sealing Surface)(Customization Available)

  • Gas Pressure : 0.7 MPa of Air

  • Dimensions : 455 mm (L) x 320 mm (W) x 440 mm (H) 

  • Port Size : Ф6 mm PU Hose

  • 7 inch TFT touching

  • PLC control

  • P.I.D. temperature control 

  • Data saving


PT. Mora Anugerah Berkat adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan laboratorium khususnya industrial material testing diantaranya adalah Heat Seal Strength Test Method, kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China,produk internasional yang kami supply/tawarkan seperti : Yasuda Seiki,RDM Test Equipment,Qualitest, Drick Instrument, Testex Instrument dan masih banyak lagi. kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.

Heat Seal Strength Test Method

  • PT. Mora Anugerah Berkat (M.A.B)
  • CLICK HERE : Heat Seal Tester Brochure
  • Alamat : JL.Taman Asri Blok M No.36 Kel.Cipadu                     Kec.Larangan,Kota Tangerang - Provinsi Banten
  • Phone  : 021 7345.7064 / 7366.0160
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat   : Whats App, Line, We Chat, Telegram
  • Website: www.moraanugerah.id  -  www.moraanugerah.com
  • Email  : marketing_div@moraanugerah.com -                         info@moraanugerah.com - info@moraanugerah.id 

Heat Seal Tester [HST-02] ASTM F88

  




Heat Seal Tester [HST-02] ASTM F88

Heat Seal Tester is professionally designed for the precise measurement of sealing temperature, time and pressure. Heat Seal Tester is for the determination of the heat sealability of a surface, or sealant layer of films, laminates, composites and polymers etc.

How well the material heat seals is expressed quantitatively as seal strength as a function of the sealing conditions of temperature, time and pressure.

Heat Seal Tester complies with ASTM F2029 “Standard Practices for Making Heatseals for Determi-nation of Heat sealability of Flexible Webs as Measured by Seal Strength ”



Principle

Place a sample between two-heated sealing jaws of Heat Seal Tester with flat surfaces when the required temperature reaches equilibrium. The upper seal jaw, driven by a gas cylinder, is pushed down, to exert a certain pressure on the sample and remain for some time. When the preset sealing time ends, the upper sealing jaw returns to its original position and the whole heatsealability testing process finishes.

Heat Seal Tester [HST-02] ASTM F88 


Technical Data

  • CLICK HERE : Heat Seal Tester Brochure

  • Sealing Temperature : Room Temperature ~ 300°C

  • Deviation : ± 0.2°C

  • Dwell time : 0.1 s~9999s

  • Sealing pressure : 0.15 MPa ~ 0.7 MPa

  • Sealing Jaws : 330 mm × 10 mm (Sealing Surface)(Customization Available)

  • Gas Pressure : 0.7 MPa of Air

  • Dimensions : 455 mm (L) x 320 mm (W) x 440 mm (H) 

  • Port Size : Ф6 mm PU Hose

  • 7 inch TFT touching

  • PLC control

  • P.I.D. temperature control 

  • Data saving


PT. Mora Anugerah Berkat adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan laboratorium khususnya industrial material testing diantaranya adalah Heat Seal Tester [HST-02] ASTM F88, kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China,produk internasional yang kami supply/tawarkan seperti : Yasuda Seiki,RDM Test Equipment,Qualitest, Drick Instrument, Testex Instrument dan masih banyak lagi. kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.

Heat Seal Tester [HST-02] ASTM F88

  • PT. Mora Anugerah Berkat (M.A.B)
  • CLICK HERE : Heat Seal Tester Brochure
  • Alamat : JL.Taman Asri Blok M No.36 Kel.Cipadu                     Kec.Larangan,Kota Tangerang - Provinsi Banten
  • Phone  : 021 7345.7064 / 7366.0160
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat   : Whats App, Line, We Chat, Telegram
  • Website: www.moraanugerah.id  -  www.moraanugerah.com
  • Email  : marketing_div@moraanugerah.com -                         info@moraanugerah.com - info@moraanugerah.id 

[HST-01] Heat Seal Tester - ASTM F88

  




[HST-01] Heat Seal Tester - ASTM F88

Heat Seal Tester is professionally designed for the precise measurement of sealing temperature, time and pressure. Heat Seal Tester is for the determination of the heat sealability of a surface, or sealant layer of films, laminates, composites and polymers etc.

How well the material heat seals is expressed quantitatively as seal strength as a function of the sealing conditions of temperature, time and pressure.

Heat Seal Tester complies with ASTM F2029 “Standard Practices for Making Heatseals for Determi-nation of Heat sealability of Flexible Webs as Measured by Seal Strength ”



Principle

Place a sample between two-heated sealing jaws of Heat Seal Tester with flat surfaces when the required temperature reaches equilibrium. The upper seal jaw, driven by a gas cylinder, is pushed down, to exert a certain pressure on the sample and remain for some time. When the preset sealing time ends, the upper sealing jaw returns to its original position and the whole heatsealability testing process finishes.

[HST-01] Heat Seal Tester - ASTM F88

Technical Data

  • CLICK HERE : Heat Seal Tester Brochure

  • Sealing Temperature : Room Temperature ~ 300°C

  • Deviation : ± 0.2°C

  • Dwell time : 0.1 s~9999s

  • Sealing pressure : 0.15 MPa ~ 0.7 MPa

  • Sealing Jaws : 330 mm × 10 mm (Sealing Surface)(Customization Available)

  • Gas Pressure : 0.7 MPa of Air

  • Dimensions : 455 mm (L) x 320 mm (W) x 440 mm (H) 

  • Port Size : Ф6 mm PU Hose

  • 7 inch TFT touching

  • PLC control

  • P.I.D. temperature control 

  • Data saving


PT. Mora Anugerah Berkat adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan laboratorium khususnya industrial material testing diantaranya adalah [HST-01] Heat Seal Tester - ASTM F88, kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China,produk internasional yang kami supply/tawarkan seperti : Yasuda Seiki,RDM Test Equipment,Qualitest, Drick Instrument, Testex Instrument dan masih banyak lagi. kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.

[HST-01] Heat Seal Tester - ASTM F88

  • PT. Mora Anugerah Berkat (M.A.B)
  • CLICK HERE : Heat Seal Tester Brochure
  • Alamat : JL.Taman Asri Blok M No.36 Kel.Cipadu                     Kec.Larangan,Kota Tangerang - Provinsi Banten
  • Phone  : 021 7345.7064 / 7366.0160
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat   : Whats App, Line, We Chat, Telegram
  • Website: www.moraanugerah.id  -  www.moraanugerah.com
  • Email  : marketing_div@moraanugerah.com -                         info@moraanugerah.com - info@moraanugerah.id 

Test Seal Strength Machine [HST-01]

  




Test Seal Strength Machine [HST-01]

Heat Seal Tester is professionally designed for the precise measurement of sealing temperature, time and pressure. Heat Seal Tester is for the determination of the heat sealability of a surface, or sealant layer of films, laminates, composites and polymers etc.

How well the material heat seals is expressed quantitatively as seal strength as a function of the sealing conditions of temperature, time and pressure.

Heat Seal Tester complies with ASTM F2029 “Standard Practices for Making Heatseals for Determi-nation of Heat sealability of Flexible Webs as Measured by Seal Strength ”



Principle

Place a sample between two-heated sealing jaws of Heat Seal Tester with flat surfaces when the required temperature reaches equilibrium. The upper seal jaw, driven by a gas cylinder, is pushed down, to exert a certain pressure on the sample and remain for some time. When the preset sealing time ends, the upper sealing jaw returns to its original position and the whole heatsealability testing process finishes.

Test Seal Strength Machine [HST-01]


Technical Data

  • CLICK HERE : Heat Seal Tester Brochure

  • Sealing Temperature : Room Temperature ~ 300°C

  • Deviation : ± 0.2°C

  • Dwell time : 0.1 s~9999s

  • Sealing pressure : 0.15 MPa ~ 0.7 MPa

  • Sealing Jaws : 330 mm × 10 mm (Sealing Surface)(Customization Available)

  • Gas Pressure : 0.7 MPa of Air

  • Dimensions : 455 mm (L) x 320 mm (W) x 440 mm (H) 

  • Port Size : Ф6 mm PU Hose

  • 7 inch TFT touching

  • PLC control

  • P.I.D. temperature control 

  • Data saving


PT. Mora Anugerah Berkat adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan laboratorium khususnya industrial material testing diantaranya adalah Test Seal Strength Machine [HST-01], kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China,produk internasional yang kami supply/tawarkan seperti : Yasuda Seiki,RDM Test Equipment,Qualitest, Drick Instrument, Testex Instrument dan masih banyak lagi. kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.

Test Seal Strength Machine [HST-01]

  • PT. Mora Anugerah Berkat (M.A.B)
  • CLICK HERE : Heat Seal Tester Brochure
  • Alamat : JL.Taman Asri Blok M No.36 Kel.Cipadu                     Kec.Larangan,Kota Tangerang - Provinsi Banten
  • Phone  : 021 7345.7064 / 7366.0160
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat   : Whats App, Line, We Chat, Telegram
  • Website: www.moraanugerah.id  -  www.moraanugerah.com
  • Email  : marketing_div@moraanugerah.com -                         info@moraanugerah.com - info@moraanugerah.id 

Test Seal Strength

  




Test Seal Strength 

Heat Seal Tester is professionally designed for the precise measurement of sealing temperature, time and pressure. Heat Seal Tester is for the determination of the heat sealability of a surface, or sealant layer of films, laminates, composites and polymers etc.

How well the material heat seals is expressed quantitatively as seal strength as a function of the sealing conditions of temperature, time and pressure.

Heat Seal Tester complies with ASTM F2029 “Standard Practices for Making Heatseals for Determi-nation of Heat sealability of Flexible Webs as Measured by Seal Strength ”



Principle

Place a sample between two-heated sealing jaws of Heat Seal Tester with flat surfaces when the required temperature reaches equilibrium. The upper seal jaw, driven by a gas cylinder, is pushed down, to exert a certain pressure on the sample and remain for some time. When the preset sealing time ends, the upper sealing jaw returns to its original position and the whole heatsealability testing process finishes.

Test Seal Strength 


Technical Data

  • CLICK HERE : Heat Seal Tester Brochure

  • Sealing Temperature : Room Temperature ~ 300°C

  • Deviation : ± 0.2°C

  • Dwell time : 0.1 s~9999s

  • Sealing pressure : 0.15 MPa ~ 0.7 MPa

  • Sealing Jaws : 330 mm × 10 mm (Sealing Surface)(Customization Available)

  • Gas Pressure : 0.7 MPa of Air

  • Dimensions : 455 mm (L) x 320 mm (W) x 440 mm (H) 

  • Port Size : Ф6 mm PU Hose

  • 7 inch TFT touching

  • PLC control

  • P.I.D. temperature control 

  • Data saving


PT. Mora Anugerah Berkat adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan laboratorium khususnya industrial material testing diantaranya adalah Test Seal Strength, kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China,produk internasional yang kami supply/tawarkan seperti : Yasuda Seiki,RDM Test Equipment,Qualitest, Drick Instrument, Testex Instrument dan masih banyak lagi. kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.

Test Seal Strength 

  • PT. Mora Anugerah Berkat (M.A.B)
  • CLICK HERE : Heat Seal Tester Brochure
  • Alamat : JL.Taman Asri Blok M No.36 Kel.Cipadu                     Kec.Larangan,Kota Tangerang - Provinsi Banten
  • Phone  : 021 7345.7064 / 7366.0160
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat   : Whats App, Line, We Chat, Telegram
  • Website: www.moraanugerah.id  -  www.moraanugerah.com
  • Email  : marketing_div@moraanugerah.com -                         info@moraanugerah.com - info@moraanugerah.id 

[HST-02] Heat Seal Strength Test

  




[HST-02] Heat Seal Strength Test 

Heat Seal Tester is professionally designed for the precise measurement of sealing temperature, time and pressure. Heat Seal Tester is for the determination of the heat sealability of a surface, or sealant layer of films, laminates, composites and polymers etc.

How well the material heat seals is expressed quantitatively as seal strength as a function of the sealing conditions of temperature, time and pressure.

Heat Seal Tester complies with ASTM F2029 “Standard Practices for Making Heatseals for Determi-nation of Heat sealability of Flexible Webs as Measured by Seal Strength ”



Principle

Place a sample between two-heated sealing jaws of Heat Seal Tester with flat surfaces when the required temperature reaches equilibrium. The upper seal jaw, driven by a gas cylinder, is pushed down, to exert a certain pressure on the sample and remain for some time. When the preset sealing time ends, the upper sealing jaw returns to its original position and the whole heatsealability testing process finishes.

[HST-02] Heat Seal Strength Test 


Technical Data

  • CLICK HERE : Heat Seal Tester Brochure

  • Sealing Temperature : Room Temperature ~ 300°C

  • Deviation : ± 0.2°C

  • Dwell time : 0.1 s~9999s

  • Sealing pressure : 0.15 MPa ~ 0.7 MPa

  • Sealing Jaws : 330 mm × 10 mm (Sealing Surface)(Customization Available)

  • Gas Pressure : 0.7 MPa of Air

  • Dimensions : 455 mm (L) x 320 mm (W) x 440 mm (H) 

  • Port Size : Ф6 mm PU Hose

  • 7 inch TFT touching

  • PLC control

  • P.I.D. temperature control 

  • Data saving


PT. Mora Anugerah Berkat adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan laboratorium khususnya industrial material testing diantaranya adalah H[HST-02] Heat Seal Strength Test,  kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China,produk internasional yang kami supply/tawarkan seperti : Yasuda Seiki,RDM Test Equipment,Qualitest, Drick Instrument, Testex Instrument dan masih banyak lagi. kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.

[HST-02] Heat Seal Strength Test 

  • PT. Mora Anugerah Berkat (M.A.B)
  • CLICK HERE : Heat Seal Tester Brochure
  • Alamat : JL.Taman Asri Blok M No.36 Kel.Cipadu                     Kec.Larangan,Kota Tangerang - Provinsi Banten
  • Phone  : 021 7345.7064 / 7366.0160
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat   : Whats App, Line, We Chat, Telegram
  • Website: www.moraanugerah.id  -  www.moraanugerah.com
  • Email  : marketing_div@moraanugerah.com -                         info@moraanugerah.com - info@moraanugerah.id 
Langganan: Postingan (Atom)