Tawk.to

PT.Mora Anugerah Berkat

PT.Mora Anugerah Berkat adalah perusahaan penyedia alat – alat laboratorium, alat laboratorium yang kami sediakan meliputi : general laboratorium equipment,medical equipment (alat kesehatan), environmental (alat uji lingkungan), chemical/reagent consumable,mineral/civil material testing dan kalibrasi.

About Us

Tampilkan postingan dengan label Plastic & Rubber Test. Tampilkan semua postingan

CREEP TESTER (Static Strain, Bending, Compression) Measurement

 

CREEP TESTER 

(Static Strain, Bending, Compression) Measurement

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti : CREEP TESTER (Static Strain, Bending, Compression) Measurement .

CREEP TESTER (Static Strain, Bending, Compression) Measurement 

  • No.145-A/No.145-B CREEP TESTER (PULLEY TYPE/ BALANCE TYPE)

  • Standard Method : JIS-K7115, ASTM-D2990, ISO-899-1

  • This tester is used to measure the increasing creep by applying static load to plastic test specimens.

  • By choosing the Chuck, the tester enables to conduct tensile test, condensation test, and bending test.

  • The tester can also be assorted with test functions such as relaxation test, heat shrinkage test, and thermal impulse test.

  • Click Here : CREEP TESTER (PULLEY TYPE/BALANCE TYPE)


CREEP TESTER (PULLEY TYPE/ BALANCE TYPE)
ModelCREEP TESTER (PULLEY TYPE)
Hangings3, 6, or 10 Hangings (3 kinds)
SpecimenSee JIS-K7162 for reference JIS-K7162
Load MethodPulley Wheel Type
Weight LoadMax. 500 N （50 kgf）
Displacement
Measurement		Potentiometer :
Scale 0.1 mm, Stroke 0 to Max. 300 mm
Differential Transformer :
Scale 0.01 mm, Stroke 0 to Max. ± 40 mm
Temperature
Range		Max. 200 °C
SoftwareWindows Compatible
OptionCompression Jig, Bending Jig, Low Temperature Oven,
Constant Temperature & Humidity Oven, Divided Oven,
Liquid Immersion Bath, Gauge Length Measuring Spec,
Weight Traveling System (WTS)
Power SourceDiffer by Specifications.
Dimensions /
Weight (Approx.)		Differ by Specifications.
CREEP TESTER (PULLEY TYPE/ BALANCE TYPE)
ModelCREEP TESTER (BALANCE TYPE)
Hangings3, 6, or 10 Hangings (3 kinds)
SpecimenSee JIS-K7162 for reference JIS-K7162
Load MethodBalance Scale Type
Weight LoadMax. 5 kN （500 kgf）
Displacement
Measurement		Differential Transformer :
Scale 0.01 mm, Stroke 0 to Max. ± 40 mm
Temperature
Range		Max. 200 °C
SoftwareWindows Compatible
OptionCompression Jig, Bending Jig, Low Temperature Oven,Constant Temperature & Humidity Oven, Divided Oven,Liquid Immersion Bath, Gauge Length Measuring Spec,Weight Traveling System (WTS)
Power SourceDiffer by Specifications.
Dimensions /
Weight (Approx.)		Differ by Specifications.

==========================

  • No.145-SV CREEP TESTER (SERVOMOTOR TYPE)

  • Standard Method : JIS-K7115, ASTM-D2990, ISO-899-1(CREEP TEST), JIS-K6263, ISO-3384(STRESS RELAXATION TEST)

  • Adding a servomotor to the usual actual load type creep tester, and detecting the load using a load cell, the servomotor type creep tester can effectively reduce impact when the test specimen breaks, simultaneously saving space.

  • By choosing the Chuck, the tester enables conducting tensile stress relaxation tests and the condensation stress relaxation test.

  • The tester can also be assorted with test functions such as thermal contraction testing and thermal impact testing.

  • CLICK HERE : CREEP TESTER (SERVOMOTOR TYPE)



CREEP TESTER (SERVOMOTOR TYPE)
Specification
Hangings3, 6, or 10 Hangings (3 kinds)
SpecimenSee JIS-K7162 or JIS-K6263 for reference
Load MethodServomotor Type
Weight LoadMax. 5 kN (500 kgf)
Load DetectionLoad Cell
Displacement
Measurement		Potentionmeter :
Scale 0.1 mm, Stroke 0 to Max. 300 mm
Differential Transformer :
0.01 mm, Stroke 0 to Max. ± 40 mm
Temperature
Range		Max. 200 °C
SoftwareWindows Compatible
OptionCompression Jig, Bending Jig, Low Temperature Oven, Constant Temperature & Humidity Oven, Divided Oven, Liquid Immersion Bath, Gauge Length Measuring Spec
Power SourceDiffer by Specifications.
Dimensions /
Weight (Approx.)		Differ by Specifications.

==========================

  • HYBRID CREEP TESTER (STRESS RELAXATION TESTER)

  • Standard Method : JIS-K7115, ASTM-D2990, ISO-899-1(CREEP TEST), JIS-K6263, ISO-3384(STRESS RELAXATION TEST)

  • By equipping a load cell to the usual CREEP TESTER, this tester enables to test stress relaxation of vulcanized rubber and thermoplastic rubber.

  • By choosing the Chuck, the tester enables to conduct the tensile stress relaxation test and the condensation stress relaxation test.

  • The tester can also be assorted with test functions such as heat shrinkage test and thermal impulse test.

  • Click Here : HYBRID CREEP TESTER (STRESS RELAXATION TESTER)



HYBRID CREEP TESTER (STRESS RELAXATION TESTER)
Specification
Hangings3, 6 or 10 Hangings, (3 kinds)
SpecimenSee JIS-K6263 for reference
Load MethodPulley Wheel Type or Balance Scale Type
Load MeasuringLoad Cell, Max. 500 N (50 kgf)
Displacement
Measurement		Potentionmeter :
Scale 0.1 mm, Stroke 0 to Max.
Differential Transformer :
Scale 0.01 mm, Stroke 0 to Max. ± 40 mm
Temperature
Range		Max. 200 °C
SoftwareWindows Compatible
OptionCompression Jig, Bending Jig, Low Temperature Oven,
Constant Temperature & Humidity Oven, Divided Oven,
Liquid Immersion Bath, Gauge Length Measuring Spec
Power SourceDiffer by Specifications.
Dimensions / Weight 
(Approx.)		Differ by Specifications.

Jika anda membutuhkan/mencari alat CREEP TESTER (Static Strain, Bending, Compression) Measurement. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap memjawab segala kebutuhan anda khususnya untuk alat uji Creep Test.

CREEP TESTER

(Static Strain, Bending, Compression) Measurement

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :

  • PT. Mora Anugerah Berkat (M.A.B)

  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten

  • Phone : 021 7345.7064 / 7366.0160

  • Mobile : 0812.8140.0749 / 0812.8770.5470 

  • Chat : Whats App, Line, WeChat, Telegram

  • Website : www.moraanugerah.id  -  www.moraanugerah.com

  • Email : info@moraanugerah.com - info@moraanugerah.id - marketing_div@moraanugerah.com

MELT FLOW INDEX TESTER (MANUAL) - PT.MAB



Melt Flow Index Tester (Manual) No.120-FWP


PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak dalam bidang industrial laboratorium testing equipment khususnya plastik, rubber, film/tape and polymer material testing salah satu diantaranya adalah Melt Flow Index Tester (Manual) No.120-FWP, berikut adalah tipe dan spesifikasi dari No.120-FWP Melt Flow Index Tester (Manual) seperti di bawah ini : 


Melt Flow Index Tester (Manual) No.120-FWP


  • No.120-SAS MELT FLOW INDEX TESTER (AUTOMATIC)
  • Standard Method : JIS-K6719-1/2, K6921-2, K6922-2, K6923-1, K6924-1, K6926-2, K7210, ASTM-D1238, ISO-1133
  • This tester is used to measure the melt flow index of thermo-plastic.
  • The melt flow index is acquired from the weight or the volume of the extruded specimen at a specified cylinder temperature and with a specified load of piston through the die.
  • The tester is assorted with an automatic cleaning system which enables to perform 1 test cycle without discontinuation (option of 3 test cycles).
  • Click Here : YASUDA SEIKI - Melt Flow index Tester Brochure

No.120-SAS MELT FLOW INDEX TESTER (AUTOMATIC)
Specification
Hangings1 or 3 Hangings (2 kinds)
Dieφ2.095 ± 0.005 mm, L8.000 ± 0.025 mm
PistonHead Diameter φ9.474 ± 0.007 mm,
Head Length L6.35 ± 0.10 mm
CylinderInner φ9.550 ± 0.007 mm, L160 mm
Temperature
Range		Max. 300 °C (Option: Max. 400 °C)
Weight
Loading		Choose the Largest Load from
0.325, 1.20, 2.16, 3.80, 5.00, 10.00, 21.60 kgf
Test
Method		Method A: Manual (Option: Automatic)
Method B: Automatic
Specimen
Feeding		Automatic
Weight LoadingAutomatic
Weight
Change		Manual (Option: Automatic)
Cylinder
Cleaning		Automatic
(Solvent Cleaning can also be Automatic)
Die CleaningAutomatic
Piston
Cleaning		Manual (Option: Automatic)
Die Cleaning
Rod Cleaning		Manual (Option: Automatic)
Cleaning Gauze FeedingManual
Data
Processing		Method A: Manual (Option: Automatic)
Method B: Automatic
Method B
Measuring		Rotary Encoder
SoftwareWindows Compatible
Accessories
Cleaning Rod (Die, Cylinder), Solvent Cleaning Device,
Specimen Cup, Cup Holder, Infundibulum, Die Gauge,
Spirit Level, Dust Box, Gauze, Air Gun
Hastelloy Spec, Specimen Purging Device, Specimen Drying Device,Air Compressor, Temperature Calibration Device,Exhaust Fan (Standard for No.120-LABOT),Smoke-Detection Sensor (Standard for No.120-LABOT)
OptionAC 200 V, 1-Phase, 10 A, 50/60 Hz
AC 200 V, 1-Phase, 15 A, 50/60 Hz
(ISO-1133-2 Compatable Type)
Air Source0.5 MPa or More
Power
Source		1 Hanging: W675× D645 × H1,370 mm/200 kg
3 Hangings: W675 × D725 × H1,370 mm/ 220 kg
Air Source0.5 MPa or More
Dimensions /
Weight (Approx.)

1 Hanging: 
W675 × D645 × H1,370 mm /200 kg
3 Hangings: 
W675 × D725 × H1,370 mm / 220 kg


====================

Melt Flow Index Tester (Manual) No.120-FWP


  • No.120-LABOT MELT FLOW INDEX TESTER (FULL AUTOMATIC)
  • Standard Method : JIS-K6719-1/2, K6921-2, K6922-2, K6923-1, K6924-1, K6926-2, K7210, ASTM-D1238, ISO-1133
  • This tester is equipped with robotic mechanism which enables fully automatic melt flow index tests up to a maximum of 50 samples (standard of 12 samples).
  • The test conditions and the outputs can be set and observed through the computer software.
  • Click Here : YASUDA SEIKI - Melt Flow index Tester Brochure

No.120-LABOT MELT FLOW INDEX TESTER (FULL AUTOMATIC)
Specification
Hangings12, 24, 50 Hangings (3 kinds)
Dieφ2.095 ± 0.005 mm, L8.000 ± 0.025 mm
PistonHead Diameter φ9.474 ± 0.007 mm,
Head Length L6.35 ± 0.10 mm
CylinderInner φ9.550 ± 0.007 mm, L160 mm
Temperature
Range		Max. 300 °C (Option: 400 °C)
Weight
Loading		0.325, 1.20, 2.16, 3.80, 5.00, 10.00 kgf and 21.60 kgf
Test
Method		Method A : Manual (Option: Automatic)
Method B: Automatic
Specimen
Feeding		Automatic
Weight LoadingAutomatic
Weight
Change		Manual (Option: Automatic)
Cylinder
Cleaning		Automatic (Solvent cleaning can also be automatic)
Die CleaningAutomatic
Piston
Cleaning		Automatic
Die Cleaning
Rod Cleaning		Automatic
Cleaning Gauze FeedingAutomatic
Data
Processing		Method A: Manual (Option: Automatic)
Method B: Automatic
Method B
Measuring		Rotary Encoder
SoftwareWindows Compatible
AccessoriesCleaning Rod (Die & Cylinder), Solvent Cleaning Device,Specimen Cup, Cup Holder, Infundibulum, Die Gauge,Spirit Level, Dust Box, Gauze, Air Gun
OptionHastelloy Spec, Specimen Purging Device,
Specimen Drying Device, Air Compressor, Temperature Calibration Device, Exhaust Fan, Smoke-Detection Sensor
Air Source0.5 MPa or More
Dimensions /
Weight
(Approx.)		Hangings :
W950 × D700 × H1,750 mm/ 300 kg50
Hangings:
W1,100 × D700 × H1,750 mm/ 350 kg
Power SourceAC 100 V, 1-Phase, 15 A, 50/60 Hz
AC 200 V, 1-Phase, 20 A, 50/60 Hz
(ISO-1133-2 Compatable Type)


====================

Melt Flow Index Tester (Manual) No.120-FWP

  • No.120-FWP MELT FLOW INDEX TESTER (MANUAL)
  • Standard Method : JIS-K6719-½, K6921-2, K6922-2, K6923-1, K6924-1 , K6926-2 , K7210 ,ASTM-D1238 ,ISO-1133
  • This tester is for measuring the melt flow index of thermo-plastic.
  • The test can be conducted easily, from setting the test condition up to data analysis, using a 5.7” full color touch panel.
  • Click Here : YASUDA SEIKI - Melt Flow index Tester Brochure

No.120 - FWP Melt Flow Index Tester (Manual)
Specification
Hangings1 Hanging
Dieφ2.095 ± 0.005 mm,
L8.000 ± 0.025 mm
PistonHead Diameter φ9.474 ± 0.007 mm,
Head Length L6.35 ± 0.10 mm
CylinderInner φ9.550 ± 0.007 mm, L160 mm
Temperature
Range		Max. 400 °C
Test LoadInitial 0.325 kgf
Choose 1 kind from 1.20 ; 2.16 ; 3.80 ; or 5.00 kgf.
(Option: 10.00 and 21.60 kgf)
Test MethodMethod A : Manual
(Option: Automatic Cutter)
Method B : Automatic
Data
Processing		Method A : Automatic (Measuring the weight of the cut off specimen is done by hand)
Method B : Automatic
Method B
Measuring		Rotary Encoder
Standard
Specification		SD Card Slot, LAN Port
OptionMini Printer,
Method A Air Pressure Type Automatic Cutter,Manual Type Die Plug,
Safety Cover with Interlock Attached, Half Die,Air Pressure Type Automatic Loader (No.120-FWP-W)
AccessoriesCleaning Rod (Die & Cylinder),
Injection Rod, Funnel, Die Gauge,
Method A Cutting Knife, Spirit Level, Gauze
Power SourceAC 100 V, 1-Phase, 15 A, 50/60 Hz or
AC 200 V, 1-Phase, 10 A, 50/60 Hz
Air Source0.5 MPa or More
(For Method A Pneumatic Type
Weight Loading Device Specification)
Dimensions /
Weight
(Approx.)		No.120FWP :
W700× D450 × H1,020 mm / 75 kg
No.120FWP-WP-W :
W710 × D450 × H1,060 mm/ 120 kg


PT. Mora Anugerah Berkat (M. A. B) adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan industrial material testing equipment seperti Melt Flow Index Tester (Manual) No.120-FWP , kami juga menyediakan peralatan yang sudah teruji dan sesuai dengan standard seperti ASTM, JIS dan lain-lain ; kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China,produk internasional yang kami supply/tawarkan seperti : Yasuda Seiki, Qualitest, Toyoseiki, Drick Instrument, Cometech,Testex Instrument  dan lain - lain.

Melt Flow Index Tester (Manual) No.120-FWP

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 
  • PT. Mora Anugerah Berkat [M.A.B]
  • Click Here : YASUDA SEIKI - Melt Flow index Tester Brochure
  • Alamat: Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten 
  • Phone: 021 7345.7064 / 7366.0160
  • Mobile: 0812.8140.0749 / 0812.8770.5470
  • CHATS : Whats App, Line, WeChat, Telegram 
  • Website : www.moraanugerah.id - www.moraanugerah.com
  • Email : info@moraanugerah.com - info@moraanugerah.id - 
  • marketing_div@moraanugerah.com  - marketing@moraanugerah.com
Langganan: Postingan (Atom)