Tawk.to

PT.Mora Anugerah Berkat adalah perusahaan penyedia alat – alat laboratorium, alat laboratorium yang kami sediakan meliputi : general laboratorium equipment,medical equipment (alat kesehatan), environmental (alat uji lingkungan), chemical/reagent consumable,mineral/civil material testing dan kalibrasi.

About Us

Tampilkan postingan dengan label harga o-y pull slip tester. Tampilkan semua postingan

Jual Alat No.162 O-Y Pull Slip Tester

PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti : Jual Alat No.162 O-Y Pull Slip Tester.

Jual Alat No.162 O-Y Pull Slip Tester


 

 

 

Jual Alat No.162 O-Y Pull Slip Tester


  • O-Y PULL SLIP TESTER
  • Standard Method : JIS-A1454, A1509-12
  • This tester evaluates the slippage of floor material.
  • The coefficient of slip resistance can be measured by the maximum tensile load at the point when the test specimen and the slip head touch each other.
  • When the test specimen and the slip head touch each other, the slip head is pulled 18° upwards at a prescript load speed to acquire the maximum tensile load for the calculation of the coefficient of slip resistance (C.S.R) As an option, slippage of clay tile can also be tested.
  • In addition to the usual C.S.R, C.S.R-B can also be calculated.
  • Click Here : O-Y Pull Slip Tester Brochure         
  • Plastic,Rubber,Film and Polymer Product Catalog

      Jual Alat No.162 O-Y Pull Slip Tester

      SPECIFICATION O-Y PULL SLIP TESTER
      Specimen100 × 120 mm (Ceramic Tile: 90 × 135 mm)
      Sled80 × 70 mm
      Vertical
      Weight Load      		Initial 294 N (30 kgf) to Max. 785 N (80 kgf)
      (Standard: 785 N)
      Tension Angle18°
      Tension Load
      Measuring      		Load Cell, Max. 5 kN (Scale 1 N)
      Tension
      Load Speed      		785 N/s
      SoftwareWindows Compatible
      OptionSpecimen Holder (Standard and Nosing Edge type),
      Ceramic Tile Spec (with Sled, Testing Powder,
      C.S.R.-B Measuring Software)
      Power SourceAC 100 V, 1-Phase, 10 A, 50/60 Hz
      Dimensions/
      Weight (Approx.)      		Tester Body: W1,500 × D500 × H1,100 mm, 300 kg
      Control Box: W230 × D310 × H210 mm, 5 kg


      Jika anda membutuhkan/mencari alat O-Y Pull Slip Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk Jual Alat No.162 O-Y Pull Slip Tester.

      Jual Alat No.162 O-Y Pull Slip Tester

      Jual Alat Uji Pull Slip Tester di Tangerang

       PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti : Jual Alat Uji Pull Slip Tester di Tangerang.

      Jual Alat Uji Pull Slip Tester di Tangerang


       

       

       

      Jual Alat Uji Pull Slip Tester di Tangerang


      • O-Y PULL SLIP TESTER
      • Standard Method : JIS-A1454, A1509-12
      • This tester evaluates the slippage of floor material.
      • The coefficient of slip resistance can be measured by the maximum tensile load at the point when the test specimen and the slip head touch each other.
      • When the test specimen and the slip head touch each other, the slip head is pulled 18° upwards at a prescript load speed to acquire the maximum tensile load for the calculation of the coefficient of slip resistance (C.S.R) As an option, slippage of clay tile can also be tested.
      • In addition to the usual C.S.R, C.S.R-B can also be calculated.
      • Click Here : O-Y Pull Slip Tester Brochure         
      • Plastic,Rubber,Film and Polymer Product Catalog


          Jual Alat Uji Pull Slip Tester di Tangerang

          SPECIFICATION O-Y PULL SLIP TESTER
          Specimen100 × 120 mm (Ceramic Tile: 90 × 135 mm)
          Sled80 × 70 mm
          Vertical
          Weight Load          		Initial 294 N (30 kgf) to Max. 785 N (80 kgf)
          (Standard: 785 N)
          Tension Angle18°
          Tension Load
          Measuring          		Load Cell, Max. 5 kN (Scale 1 N)
          Tension
          Load Speed          		785 N/s
          SoftwareWindows Compatible
          OptionSpecimen Holder (Standard and Nosing Edge type),
          Ceramic Tile Spec (with Sled, Testing Powder,
          C.S.R.-B Measuring Software)
          Power SourceAC 100 V, 1-Phase, 10 A, 50/60 Hz
          Dimensions/
          Weight (Approx.)          		Tester Body: W1,500 × D500 × H1,100 mm, 300 kg
          Control Box: W230 × D310 × H210 mm, 5 kg


          Jika anda membutuhkan/mencari alat O-Y Pull Slip Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk alat uji Jual Alat Uji Pull Slip Tester di Tangerang.

          Jual Alat Uji Pull Slip Tester di Tangerang

          Jual Alat Uji - O-Y Pull Slip Tester

          PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti : Jual Alat Uji - O-Y Pull Slip Tester .

          Jual Alat Uji - O-Y Pull Slip Tester


           

           

           

          Jual Alat Uji - O-Y Pull Slip Tester 


          • O-Y PULL SLIP TESTER
          • Standard Method : JIS-A1454, A1509-12
          • This tester evaluates the slippage of floor material.
          • The coefficient of slip resistance can be measured by the maximum tensile load at the point when the test specimen and the slip head touch each other.
          • When the test specimen and the slip head touch each other, the slip head is pulled 18° upwards at a prescript load speed to acquire the maximum tensile load for the calculation of the coefficient of slip resistance (C.S.R) As an option, slippage of clay tile can also be tested.
          • In addition to the usual C.S.R, C.S.R-B can also be calculated.
          • Click Here : O-Y Pull Slip Tester Brochure         
          • Plastic,Rubber,Film and Polymer Product Catalog

              Jual Alat Uji - O-Y Pull Slip Tester 

              SPECIFICATION O-Y PULL SLIP TESTER
              Specimen100 × 120 mm (Ceramic Tile: 90 × 135 mm)
              Sled80 × 70 mm
              Vertical
              Weight Load              		Initial 294 N (30 kgf) to Max. 785 N (80 kgf)
              (Standard: 785 N)
              Tension Angle18°
              Tension Load
              Measuring              		Load Cell, Max. 5 kN (Scale 1 N)
              Tension
              Load Speed              		785 N/s
              SoftwareWindows Compatible
              OptionSpecimen Holder (Standard and Nosing Edge type),
              Ceramic Tile Spec (with Sled, Testing Powder,
              C.S.R.-B Measuring Software)
              Power SourceAC 100 V, 1-Phase, 10 A, 50/60 Hz
              Dimensions/
              Weight (Approx.)              		Tester Body: W1,500 × D500 × H1,100 mm, 300 kg
              Control Box: W230 × D310 × H210 mm, 5 kg


              Jika anda membutuhkan/mencari alat O-Y Pull Slip Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk alat uji Pull Slip Tester .

              Jual Alat Uji - O-Y Pull Slip Tester 

              Pemasok O-Y Pull Slip Testing Machine di Surabaya

              PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti : Pemasok O-Y Pull Slip Testing Machine di Surabaya.

              Pemasok O-Y Pull Slip Testing Machine di Surabaya


               

               

               

              Pemasok O-Y Pull Slip Testing Machine di Surabaya


              • O-Y PULL SLIP TESTER
              • Standard Method : JIS-A1454, A1509-12
              • This tester evaluates the slippage of floor material.
              • The coefficient of slip resistance can be measured by the maximum tensile load at the point when the test specimen and the slip head touch each other.
              • When the test specimen and the slip head touch each other, the slip head is pulled 18° upwards at a prescript load speed to acquire the maximum tensile load for the calculation of the coefficient of slip resistance (C.S.R) As an option, slippage of clay tile can also be tested.
              • In addition to the usual C.S.R, C.S.R-B can also be calculated.
              • Click Here : O-Y Pull Slip Tester Brochure         
              • Plastic,Rubber,Film and Polymer Product Catalog


                  Pemasok O-Y Pull Slip Testing Machine di Surabaya


                  SPECIFICATION O-Y PULL SLIP TESTER
                  Specimen100 × 120 mm (Ceramic Tile: 90 × 135 mm)
                  Sled80 × 70 mm
                  Vertical
                  Weight Load                  		Initial 294 N (30 kgf) to Max. 785 N (80 kgf)
                  (Standard: 785 N)
                  Tension Angle18°
                  Tension Load
                  Measuring                  		Load Cell, Max. 5 kN (Scale 1 N)
                  Tension
                  Load Speed                  		785 N/s
                  SoftwareWindows Compatible
                  OptionSpecimen Holder (Standard and Nosing Edge type),
                  Ceramic Tile Spec (with Sled, Testing Powder,
                  C.S.R.-B Measuring Software)
                  Power SourceAC 100 V, 1-Phase, 10 A, 50/60 Hz
                  Dimensions/
                  Weight (Approx.)                  		Tester Body: W1,500 × D500 × H1,100 mm, 300 kg
                  Control Box: W230 × D310 × H210 mm, 5 kg


                  Jika anda membutuhkan/mencari alat O-Y Pull Slip Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk alat Pemasok O-Y Pull Slip Testing Machine di Surabaya.

                  Pemasok O-Y Pull Slip Testing Machine di Surabaya


                   

                  Vendor O-Y Pull Slip Testing Equipment di Pantai Indah Kapuk

                  PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti : Electronic Pull Test Machine.

                  Vendor O-Y Pull Slip Testing Equipment di Pantai Indah Kapuk


                   

                   

                   

                  Vendor O-Y Pull Slip Testing Equipment di Pantai Indah Kapuk


                  • O-Y PULL SLIP TESTER
                  • Standard Method : JIS-A1454, A1509-12
                  • This tester evaluates the slippage of floor material.
                  • The coefficient of slip resistance can be measured by the maximum tensile load at the point when the test specimen and the slip head touch each other.
                  • When the test specimen and the slip head touch each other, the slip head is pulled 18° upwards at a prescript load speed to acquire the maximum tensile load for the calculation of the coefficient of slip resistance (C.S.R) As an option, slippage of clay tile can also be tested.
                  • In addition to the usual C.S.R, C.S.R-B can also be calculated.
                  • Click Here : O-Y Pull Slip Tester Brochure         
                  • Plastic,Rubber,Film and Polymer Product Catalog

                      Vendor O-Y Pull Slip Testing Equipment di Pantai Indah Kapuk

                      SPECIFICATION O-Y PULL SLIP TESTER
                      Specimen100 × 120 mm (Ceramic Tile: 90 × 135 mm)
                      Sled80 × 70 mm
                      Vertical
                      Weight Load                      		Initial 294 N (30 kgf) to Max. 785 N (80 kgf)
                      (Standard: 785 N)
                      Tension Angle18°
                      Tension Load
                      Measuring                      		Load Cell, Max. 5 kN (Scale 1 N)
                      Tension
                      Load Speed                      		785 N/s
                      SoftwareWindows Compatible
                      OptionSpecimen Holder (Standard and Nosing Edge type),
                      Ceramic Tile Spec (with Sled, Testing Powder,
                      C.S.R.-B Measuring Software)
                      Power SourceAC 100 V, 1-Phase, 10 A, 50/60 Hz
                      Dimensions/
                      Weight (Approx.)                      		Tester Body: W1,500 × D500 × H1,100 mm, 300 kg
                      Control Box: W230 × D310 × H210 mm, 5 kg


                      Jika anda membutuhkan/mencari alat O-Y Pull Slip Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk Vendor O-Y Pull Slip Testing Equipment di Pantai Indah Kapuk.

                      Vendor O-Y Pull Slip Testing Equipment di Pantai Indah Kapuk

                      Jual Alat Uji [Yasuda] No.162 O-Y Pull Slip Tester

                      PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti : Alat Uji [Yasuda] No.162 O-Y Pull Slip Tester.

                      Jual Alat Uji [Yasuda] No.162 O-Y Pull Slip Tester


                       

                       

                       

                      Jual Alat Uji [Yasuda] No.162 O-Y Pull Slip Tester


                      • O-Y PULL SLIP TESTER
                      • Standard Method : JIS-A1454, A1509-12
                      • This tester evaluates the slippage of floor material.
                      • The coefficient of slip resistance can be measured by the maximum tensile load at the point when the test specimen and the slip head touch each other.
                      • When the test specimen and the slip head touch each other, the slip head is pulled 18° upwards at a prescript load speed to acquire the maximum tensile load for the calculation of the coefficient of slip resistance (C.S.R) As an option, slippage of clay tile can also be tested.
                      • In addition to the usual C.S.R, C.S.R-B can also be calculated.
                      • Click Here : O-Y Pull Slip Tester Brochure         
                      • Plastic,Rubber,Film and Polymer Product Catalog

                          Jual Alat Uji [Yasuda] No.162 O-Y Pull Slip Tester

                          SPECIFICATION O-Y PULL SLIP TESTER
                          Specimen100 × 120 mm (Ceramic Tile: 90 × 135 mm)
                          Sled80 × 70 mm
                          Vertical
                          Weight Load                          		Initial 294 N (30 kgf) to Max. 785 N (80 kgf)
                          (Standard: 785 N)
                          Tension Angle18°
                          Tension Load
                          Measuring                          		Load Cell, Max. 5 kN (Scale 1 N)
                          Tension
                          Load Speed                          		785 N/s
                          SoftwareWindows Compatible
                          OptionSpecimen Holder (Standard and Nosing Edge type),
                          Ceramic Tile Spec (with Sled, Testing Powder,
                          C.S.R.-B Measuring Software)
                          Power SourceAC 100 V, 1-Phase, 10 A, 50/60 Hz
                          Dimensions/
                          Weight (Approx.)                          		Tester Body: W1,500 × D500 × H1,100 mm, 300 kg
                          Control Box: W230 × D310 × H210 mm, 5 kg


                          Jika anda membutuhkan/mencari alat O-Y Pull Slip Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk alat uji [Yasuda] No.162 O-Y Pull Slip Tester.

                          Jual Alat Uji [Yasuda] No.162 O-Y Pull Slip Tester
                          Langganan: Postingan (Atom)