PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat material testing equipment khusus industrial testing seperti pengujian plastic, rubber, film/tape dan polymer salah satu diantaranya yang kami supply adalah Falling Ball Impact Test. 

FALLING BALL IMPACT TESTER

• No.183 Falling Ball Impact Tester

• Standard Method : JIS-(K5400), K5600-5-3, (K6718), (K6745), K7211, ISO-6272

• This tester is used to evaluate the impact resistance of rigid plastic, coating etc.

• The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.

• Click Here : No.183 Falling Ball Impact Tester Brochure

• Click Here : Plastic, Rubber, Film & Polymer Catalog Yasuda Seiki 

• Click Here : Plastic, Rubber, Film & Polymer Catalog
  

SPECIFICATION No.183 FALLING BALL IMPACT TESTER
Falling Height	50 to Max. 1,000 mm (Pitch 50 mm)
	50 to Max. 2,000 mm (Pitch 50 mm)
Falling Weight	Depends on the Standards
Specimen Holder	Depends on the Standards
Accessories	Spirit Level: 1 pc, Foot Switch
Power Source	AC 100 V, 1-Phase, 3 A, 50/60 Hz
Dimensions /	Tester Body: W660 × D460 × H2,
	000 to 2,500 mm,
Weight (Approx.)	100 to 115 kg
	Control Box: W200 × D280 × H215 mm, 7 kg

SPECIFICATION FILM IMPACT TESTER
Model	NO.181 FILM IMPACT TESTER	NO.181-L FILM IMPACT TESTER (WITH REFRIGERATING MACHINE)
Capacity	0 to 1.5 J (Scale 0.05 J),0 to 3.0 J (Scale 0.1 J) (2 ranges) 0 to 3.0 J (Scale 0.1 J), 0 to 6.0 J (Scale 0.2 J)	0 to 1.5 J (Scale 0.05 J),0 to 3.0 J (Scale 0.1 J) (2 ranges) 0 to 3.0 J (Scale 0.1 J),0 to 6.0 J (Scale 0.2 J)
Impact Head	Hemispherical shape, R12.7 mm, R6.35 mm	Hemispherical shape, R12.7 mm, R6.35 mm
Lift-Up Angle	90° (Additional Weight type)	60°, 90° (2 Stage Type)
Specimen	φ80 mm	φ80 mm
Clamp	Inner φ60 mm	Inner φ60 mm
Temperature Range	―	-35 °C to 60 °C (Refrigerator)
Option	Digital Display Ver.	Digital Display Ver.
Power Source	―	AC 200 V, 3-Phase, 20 A, 50/60 Hz
Dimensions / Weight (Approx.)	W600 × D190 × H460 mm, 32 kg	W1,080 × D700 × H930 mm, 150 kg

Jika anda membutuhkan/mencari alat Falling Ball Impact Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap memjawab segala kebutuhan anda khususnya untuk alat uji Falling Ball Impact Testing Machine.

FALLING BALL IMPACT TESTER

       

Capping Gypsum Taiwan CAPSTONE

According to ASTM CNS 11297 Standard Practice for Capping Cylindrical Concrete Specimens, there are some key factors for using capping materials :

1. ASTM C617 4.1: Capping Plates—Neat cement caps and high-strength gypsum paste caps shall be formed against a glass plate at least 6 mm [1⁄4 in.] thick.
2. ASTM C617 4.2: Suitable alignment devices, such as As: As guide bars or bull's-eye levels, shall be used in conjunction with capping plates to ensure that no single cap will depart from perpendicularity to the axis of a cylindrical specimen by more than 0.5° (approximately equivalent to 3 mm in 300 mm [1 ⁄8 in. in 12 in.]).
3. ASTM C617 5.1: The strength of the capping material and the thickness of the caps shall
4. ASTM C617 5.1.3: The compressive strength of capping materials shall be determined by testing 50 mm [2 in.] cubes following the procedure described in Test Method C109/C109M.
5. According to ASTM C617 5.1.4: The strength Of the capping material shall be determined on receipt of a new lot and at intervals not exceeding three months.
6. Click Here : CAPSTONE Capping Gypsum

Capping Gypsum Around 30 mins, the strength of the gypsum can reach 5,000~9,000 psi (350~630 kgf/cm2). This type of gypsum is mostly used in the capping material for concrete compression test according to ASTM C617 standard, so our high strength Capping Gypsum the offer the convenient and excellent testing material for civil engineering industry.

Capping Gypsum Taiwan CAPSTONE

Capping Strength Perfomance

Product Capping Gypsum Consist Of :

A. Capping Gypsum S-420

S-420 features the high quality and high strength concrete test capping material. It is designated as the most reliable product by many professional testing labs. The high reputation of S -420 raised the demand. Modern buildings such as high-rise construction request S-420 as the minimum strength as qualification.

The water to gypsum ratio for S-420 is recommended to be 21-22%. After simply mixing with water, the gypsum is ready to use immediately and will be fully solidified after approximately 30 minutes and reach the strength over 420 kgf/cm2, Equals to 6000psi.

With Compressive Strength and Maximum Thickness of Capping Materials.

B. Capping Gypsum S-350

S-350 is the most popular concrete capping products of Capstone Series. S-350 provides the best balance of working ability and strength performance for concrete capping.The water and gypsum ratio for S-350 is recommended to be 23-24%. After simply mixing with water, the gypsum can be used immediately and will fully harden in approximately 30 minutes. with strength reaching over 350 kgf/cm2, equals to 5000psi.

With Compressive Strength and Maximum Thickness of Capping Materials.

C. Capping Gypsum S-280

S-280 is the entry level Concrete capping product of the Capstone Series. It provides the basic compressive strength with the lowest price.

The water-gypsum ratio for S-280 is recommended to be 25-26%. After simply mixing with water, the gypsum can be used immediately and will fully harden inapproximately 30 minutes. With strength reaching over 280 kgf/cm2, equals to 4000psi

With Compressive Strength and Maximum Thickness of Capping Materials

According to the regulations of US ASTM C617 standard, it is allowed to use high strength gypsum in capping cylindrical concrete specimens. Compared with other methods, gypsum capping is the most convenient, efficient, rapid, and safest capping method.

Capping Gypsum Taiwan CAPSTONE

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 

• PT. Mora Anugerah Berkat (M.A.B)
• Click Here : CAPSTONE Capping Gypsum
• Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,
•                  Kota Tangerang - Provinsi Banten 
• Phone : 021 7345.7064
• Mobile : 0812.8140.0749 / 0812.8770.5470
• Chat : Whats App,Line,WeChat,Telegram 
• Website : www.moraanugerah.id - www.moraanugerah.com
• Email : info@moraanugerah.com - info@moraanugerah.id -  
•                  marketing_div@moraanugerah.com 

No.119 De Mattia Flex Cracking and Growth Tester [YASUDA SEIKI]

DE MATTIA FLEX CRACKING TEST

PT. Mora Anugerah Berkat (M. A. B) adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan industrial material testing equipment seperti DE MATTIA FLEX CRACKING TEST , kami juga menyediakan peralatan yang sudah teruji dan sesuai dengan standard seperti ASTM, JIS dan lain-lain ; kami juga menyediakan berbagai brand / merk internasional dari USA, Eropa dan China,produk internasional yang kami supply / tawarkan seperti : Yasuda Seiki, Qualitest, Toyoseiki, Drick Instrument, Cometech,Testex Instrument dan lain - lain. 

DE MATTIA FLEX CRACKING TEST

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 

• PT. Mora Anugerah Berkat [M.A.B]
• CLICK HERE : YASUDA SEIKI No.145 CREEP TESTING Brochure
• Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan, Kota Tangerang - Provinsi Banten 
• Phone : 021 7345.7064 / 7366.0160
• Mobile : 0812.8140.0749 / 0812.8770.5470
• Chat : Whats App, Line, WeChat, Telegram 
• Website : www.moraanugerah.id - www.moraanugerah.com
• Email : info@moraanugerah.com - info@moraanugerah.id -  
•  marketing_div@moraanugerah.com - marketing@moraanugerah.com