Tawk.to

PT.Mora Anugerah Berkat adalah perusahaan penyedia alat – alat laboratorium, alat laboratorium yang kami sediakan meliputi : general laboratorium equipment,medical equipment (alat kesehatan), environmental (alat uji lingkungan), chemical/reagent consumable,mineral/civil material testing dan kalibrasi.

Model No.101-HS Taber Type Abrasion Tester di Sukabumi

taber abraser price
Published On Juli 05, 2023 By Mora Anugerah Berkat
0 Komentar

Model No.101-HS Taber Type Abrasion Tester  di Sukabumi


                          



Model No.101-HS Taber Type Abrasion Tester  di Sukabumi 


Jika anda membutuhkan/mencari peralatan pengujian material testing khususnya untuk Plastik, Rubber, Film, Polymer dan lain-lain, hubungi  PT. Mora Anugerah Berkat merupakan perusahaan yang menyediakan / mensupply alat uji seperti No.101 Taber Type Abrasion Tester  salah satunya dengan brand Yasuda Seiki Seisakusho Ltd.


  • No.101-H TABER TYPE ABRASION TESTER
  • Standard Method : JIS A1453, (K5400), K5600-5-8/9, K5665, K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM D1044, TAPPI-T476, JAS (JASO-M403), ISO 4649,5470-1, 7784-1/2, 
  • This tester is used to evaluate the abrading endurance of flat surface materials when they are abraded with an abrading wheel.
  • The operator is to place the abrading wheel to the rotating test specimen at a prescript load and abrade the test specimen.
  • After the test is finished, the operator is to measure the abraded mass, volume, thickness, and the optical difference of the test specimen.
  • This tester is widely used in testing plastic, rubber, decorative sheet, leather, paper, and paint surface.9352
  • Click Here : No.101-H Taber Type Abrasion Tester Brochure
  • Click Here : Plastic, Rubber, Film and Polymer Testing Equipment


Specification
ModelNo.101-H TABER TYPE ABRASION TESTER
Turn Tableφ150 mm
Table Rotation
Speed		60 ± 2 rpm, 70 ± 2 rpm,
72 ± 2 rpm
Weight Load2.45 N(250 gf), 4.9 N(500 gf), 9.8 N (1,000 gf)
Counter6 Digits Preset Counter
Suction NozzleInner φ8 mm: 2 pcs
OptionInlet Pressure Gauge,Safety Cover
AccessoriesAbrasion Wheel : 1 set (2 sets for No.101-H-2),
Thickness Guage : 2 pcs,
Weight(4.9N,9.8N) : 2 pcs each,
Suction Device (Vacuum Cleaner) : 1 set
Power Plug Adaptor : 1 pc
Power Source1 Hanging (No.101-H-1):
AC 100 V, 1-Phase, 15 A, 50/60 Hz
2 Hangings (No.101-H-2):
AC 100 V, 1-Phase, 20 A, 50/60 Hz
*2 outlets required
Dimensions /
Weight (Approx.)		1 Hanging (No.101-H-1):
W350 × D350 × H450 mm/ 25 kg
2 Hangings (No.101-H-2):
W700 × D350 × H510 mm/ 45 kg


Model No.101-HS Taber Type Abrasion Tester  di Sukabumi


                                    


No.101-K Sander (For Abrasion Wheel)
ToolDiamond
Rotation Speed1,300 rpm to 1,500 rpm (50 Hz)
1,550 rpm to 1,800 rpm (60 Hz)
AccessoriesPower Plug Adaptor: 1 pc
Power SourceAC 100 V, 1-Phase, 3 A, 50/60 Hz
Dimensions /
Weight (Approx.)		W210 × D330 × H380 mm/ 10 kg

==============================================

Model No.101-HS Taber Type Abrasion Tester  di Sukabumi

  • No.101-HS TABER TYPE ABRASION TESTER (WITH WIND METER)

  • Standard Method : JIS A1453, (K5400), K5600-5-8/9, K5665, K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM D1044, TAPPI-T476, JAS (JASO-M403), ISO 4649, 5470-1, 7784-1/2, 9352

  • This is a tester with Wind Meter attached to No.101-H TABER TYPE ABRASION TESTER.

  • It sucks the abraded scrap during the test.

  • Not only that, it measures the air flow while sucking so it enables to have more precise test result.

  • Click Here : No.101-HS Taber Type Abrasion Tester Brochure

  • Click Here : Plastic, Rubber, Film and Polymer Testing Equipment




Model
No.101-HS TABER TYPE ABRASION TESTER
(WITH WIND METER)
Turn Tableφ150 mm
Table Rotation
Speed		60 ± 2 rpm, 70 ± 2 rpm, 72 ± 2 rpm
Weight Load2.45 N(250 gf), 4.9 N (500 gf),
9.8 N (1,000 gf)
Counter6 Digits Preset Counter
Suction NozzleInner φ8 mm: 2 pcs
OptionSafety Cover
AccessoriesAbrasion Wheel : 1 set (2 sets for No.101-H-2),
Thickness Guage : 2 pcs,
Weight(4.9N,9.8N) : 2 pcs each,
Suction Device (Vacuum Cleaner) : 1 set
Power Plug Adaptor : 1 pc
Power SourceAC 100 V, 1-Phase, 15 A, 50/60 Hz
Dimensions /
Weight (Approx.)		W400 × D400 × H385 mm /
25 kg


Berikut adalah link / tautan produk catalog yang kami miliki seperti dibawah ini :  

  1. Click Here : Yasuda Seiki : Plastic, Rubber, Tape & Polymer Catalog

  2. Click Here : Yasuda Seiki : Electric Wire and Cable Catalog

  3. Click Here : Yasuda Seiki : Leather, Vinyl Leather Cloth Catalog

  4. Click Here : Yasuda Seiki : Paper,Pulp Catalog

  5. Click Here : Drick Instrument : Industrial Testing Instrument Catalog 

  6. Click Here : Cell Instrument : Plastic, Rubber, Tape & Polymer Catalog

  7. Click Here : Testex Instrument Fabric,Garment & Textile Catalog


Model No.101-HS Taber Type Abrasion Tester  di Sukabumi

Kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.
  • PT. Mora Anugerah Berkat (M.A.B)
  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan, Kota Tangerang - Provinsi Banten
  • Phone : 021 7345.7064
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat : Whats App, Line, WeChat, Telegram
  • Website : www.moraanugerah.id -
  • www.moraanugerah.com
  • Email : info@moraanugerah.com -
  • info@moraanugerah.id -
  • marketing_div@moraanugerah.com
Tagged With:
Lokasi: Tangerang,Indonesia Jl. Taman Asri Utama No.36, RT.001/RW.010, Cipadu, Kec. Larangan, Kota Tangerang, Banten 15154, Indonesia

About author: Mora Anugerah Berkat

Cress arugula peanut tigernut wattle seed kombu parsnip. Lotus root mung bean arugula tigernut horseradish endive yarrow gourd. Radicchio cress avocado garlic quandong collard greens.

0 Komentar:

Langganan: Posting Komentar (Atom)