Tawk.to

PT.Mora Anugerah Berkat adalah perusahaan penyedia alat – alat laboratorium, alat laboratorium yang kami sediakan meliputi : general laboratorium equipment,medical equipment (alat kesehatan), environmental (alat uji lingkungan), chemical/reagent consumable,mineral/civil material testing dan kalibrasi.

About Us

Tampilkan postingan dengan label No183-S Failling Dart Impact Tester. Tampilkan semua postingan

No.220 Dart Impact Testing | PT.Mora Anugerah Berkat

Jika anda membutuhkan atau mencari No.220 Dart Impact Testing | PT.Mora Anugerah Berkat untuk kebutuhan alat uji anda, PT. Mora Anugerah Berkat merupakan perusahaan yang menyediakan kebutuhan alat uji material testing khususnya untuk industri seperti dibidang plastic, rubber, tape / film, polymer, ink, coating, cat, packaging, pulp / paper dan masih banyak lagi,berikut ini yang kami tawarkan adalah No.220 Dart Impact Test , untuk spesifikasi adalah sebagai berikut.

No.220 Dart Impact Testing | PT.Mora Anugerah Berkat
  • No.220 Dart Impact Tester

  • Standard Method : JIS K7124-1, Z1702, Z1707, ASTM D1709, ISO 7765-1

  • This tester is used to evaluate the impact resistance of plastic film and plastic sheet according to the stair case method.

  • The operator is to free fall a dart from the prescribed height to determine the weight of the dart that destructs 50 % of the test specimens.
  • CLICK HERE : YASUDA SEIKI - No.220 Dart Impact Tetser Brochure

No.220 Dart Impact Testing | PT.Mora Anugerah Berkat

No.220 DART IMPACT TESTER
Specification
Dart
Method A :
Hemispherical shape, φ38 ± 1 mm,Mass 40 g
Method B :
Hemispherical shape, φ50 ± 1 mm, Mass 320 g
Dart
Mass
Method A: Max. 890 g
Method B: Max. 1,410 g
Falling
Height
Method A: 0.66 ± 0.01 m
Method B: 1.50 ± 0.01 m
Pneumatic ClampInner Diameter φ125 ± 2 mm
Pressure GaugeMax. 1 MPa (Scale 0.05 MPa)
AccessoriesSpirit Level: 1 pc, Foot Switch
OptionAir Compressor, Low Temperature Oven Spec,
Safety Cover
Power SourceAC 100 V, 1-Phase, 15 A, 50/60 Hz
Air Source0.5 MPa or More
Dimensions /
Weight (Approx.)
W620 × D400× H2,150 mm, 55 kg

=================================================
No.220 Dart Impact Testing | PT.Mora Anugerah Berkat

  • No.183-S FALLING DART IMPACT TESTER
  • Standard JIS-K6742 ; K6743
  • This tester is used to evaluate the impact resistance of impact resistance hard vinyl chloride pipe (HIVP) and hard vinyl chloride pipe joint (HITS). The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.
  • CLICK HERE : YASUDA SEIKI - No.183-S Falling Dart Impact Tester Brochure

No.183-S FALLING DART IMPACT TESTER
Specification

Falling Dart

Flat Cylinder Bottom : Mass 1 kg, 3 kg, 9 kg
(3 kinds) Circular Cone: Mass 9 kg
ReceiverFlat type, V type (2 kinds)
Falling Height100 to Max 2,000 mm
Falling DeviceSolenoid Coil
Repeated Impact
Prevention Device
Ratchet-Operated
Power SourceAC 100 V, 1-Phase, 15 A, 50/60 Hz
Dimension / Weight (Approx.)W800 × D800 × H3,000 mm,
200 kg

=================================================
No.220 Dart Impact Testing | PT.Mora Anugerah Berkat

DRK135A Falling Dart Impact Tester is applicable in the impact result and energy measurement of the falling dart from a certain height against plastic films and sheets with thickness less than 1mm, which would result in 50% tested specimen failure.

Product Details
DRK135A Falling Dart Impact Tester is applicable in the impact result and energy measurement of the falling dart from a certain height against plastic films and sheets with thickness less than 1mm, which would result in 50% tested specimen failure.

Product Features :
  1. Mechanical modelling novel, considerate operation design;
  2. Comply with international standard and national standard both;
  3. Two test methods integration: A & B. easy to use;
  4. Electric gripped sample;
  5. Micro computer processing experimental data, the intelligent experimental process, greatly improving the work efficiency;
  6. CLICK HERE : DRICK -DRK135 Falling Dart Impact Tester Brochure

Product Application

It is applicable to test the impact resistance properties of plastic film, sheet, composite film, with thickness less than 1mm, such as plastic wrap, stretch film, PET sheet, different food packaging bags, heavy bags, aluminum foil, aluminum compound packing film, paper and cardboard, etc.

DRK135 - Falling Dart Impact Tester
Specification
ITEMParameter
Test MethodA,B (Optional)
Test
Range
Method A : 50 - 2000g
Method B : 300 - 2000g
Test Accuracy0.1g (0.1J)
Speciment Size> 150 mm x 150 mm
PowerAC 220V ; 50 Hz
Net Weight60 Kg


PT. Mora Anugerah Berkat (M. A. B) adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan industrial material testing equipment seperti No.220 Dart Impact Testing | PT.Mora Anugerah Berkat , kami juga menyediakan peralatan yang sudah teruji dan sesuai dengan standard seperti ASTM, JIS dan lain-lain ; kami juga menyediakan berbagai brand / merk internasional dari USA, Eropa dan China,produk internasional yang kami supply / tawarkan seperti : Yasuda Seiki, Qualitest, Toyoseiki, Drick Instrument, Cometech,Testex Instrument dan lain - lain.

No.220 Dart Impact Testing | PT.Mora Anugerah Berkat

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :

YASUDA SEIKI - No.220 Dart Impact Tester

Jika anda membutuhkan atau mencari YASUDA SEIKI - No.220 Dart Impact Tester untuk kebutuhan alat uji anda, PT. Mora Anugerah Berkat merupakan perusahaan yang menyediakan kebutuhan alat uji material testing khususnya untuk industri seperti dibidang plastic, rubber, tape / film, polymer, ink, coating, cat, packaging, pulp / paper dan masih banyak lagi,berikut ini yang kami tawarkan adalah No.220 Dart Impact Test , untuk spesifikasi adalah sebagai berikut.

YASUDA SEIKI - No.220 Dart Impact Tester
  • No.220 Dart Impact Tester

  • Standard Method : JIS K7124-1, Z1702, Z1707, ASTM D1709, ISO 7765-1

  • This tester is used to evaluate the impact resistance of plastic film and plastic sheet according to the stair case method.

  • The operator is to free fall a dart from the prescribed height to determine the weight of the dart that destructs 50 % of the test specimens.
  • CLICK HERE : YASUDA SEIKI - No.220 Dart Impact Tetser Brochure

YASUDA SEIKI - No.220 Dart Impact Tester

No.220 DART IMPACT TESTER
Specification
Dart
Method A :
Hemispherical shape, φ38 ± 1 mm,Mass 40 g
Method B :
Hemispherical shape, φ50 ± 1 mm, Mass 320 g
Dart
Mass
Method A: Max. 890 g
Method B: Max. 1,410 g
Falling
Height
Method A: 0.66 ± 0.01 m
Method B: 1.50 ± 0.01 m
Pneumatic ClampInner Diameter φ125 ± 2 mm
Pressure GaugeMax. 1 MPa (Scale 0.05 MPa)
AccessoriesSpirit Level: 1 pc, Foot Switch
OptionAir Compressor, Low Temperature Oven Spec,
Safety Cover
Power SourceAC 100 V, 1-Phase, 15 A, 50/60 Hz
Air Source0.5 MPa or More
Dimensions /
Weight (Approx.)
W620 × D400× H2,150 mm, 55 kg

=================================================
YASUDA SEIKI - No.220 Dart Impact Tester

  • No.183-S FALLING DART IMPACT TESTER
  • Standard JIS-K6742 ; K6743
  • This tester is used to evaluate the impact resistance of impact resistance hard vinyl chloride pipe (HIVP) and hard vinyl chloride pipe joint (HITS). The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.
  • CLICK HERE : YASUDA SEIKI - No.183-S Falling Dart Impact Tester Brochure

No.183-S FALLING DART IMPACT TESTER
Specification

Falling Dart

Flat Cylinder Bottom : Mass 1 kg, 3 kg, 9 kg
(3 kinds) Circular Cone: Mass 9 kg
ReceiverFlat type, V type (2 kinds)
Falling Height100 to Max 2,000 mm
Falling DeviceSolenoid Coil
Repeated Impact
Prevention Device
Ratchet-Operated
Power SourceAC 100 V, 1-Phase, 15 A, 50/60 Hz
Dimension / Weight (Approx.)W800 × D800 × H3,000 mm,
200 kg

=================================================
YASUDA SEIKI - No.220 Dart Impact Tester

DRK135A Falling Dart Impact Tester is applicable in the impact result and energy measurement of the falling dart from a certain height against plastic films and sheets with thickness less than 1mm, which would result in 50% tested specimen failure.

Product Details
DRK135A Falling Dart Impact Tester is applicable in the impact result and energy measurement of the falling dart from a certain height against plastic films and sheets with thickness less than 1mm, which would result in 50% tested specimen failure.

Product Features :
  1. Mechanical modelling novel, considerate operation design;
  2. Comply with international standard and national standard both;
  3. Two test methods integration: A & B. easy to use;
  4. Electric gripped sample;
  5. Micro computer processing experimental data, the intelligent experimental process, greatly improving the work efficiency;
  6. CLICK HERE : DRICK -DRK135 Falling Dart Impact Tester Brochure

Product Application

It is applicable to test the impact resistance properties of plastic film, sheet, composite film, with thickness less than 1mm, such as plastic wrap, stretch film, PET sheet, different food packaging bags, heavy bags, aluminum foil, aluminum compound packing film, paper and cardboard, etc.

DRK135 - Falling Dart Impact Tester
Specification
ITEMParameter
Test MethodA,B (Optional)
Test
Range
Method A : 50 - 2000g
Method B : 300 - 2000g
Test Accuracy0.1g (0.1J)
Speciment Size> 150 mm x 150 mm
PowerAC 220V ; 50 Hz
Net Weight60 Kg


PT. Mora Anugerah Berkat (M. A. B) adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan industrial material testing equipment seperti YASUDA SEIKI - No.220 Dart Impact Tester , kami juga menyediakan peralatan yang sudah teruji dan sesuai dengan standard seperti ASTM, JIS dan lain-lain ; kami juga menyediakan berbagai brand / merk internasional dari USA, Eropa dan China,produk internasional yang kami supply / tawarkan seperti : Yasuda Seiki, Qualitest, Toyoseiki, Drick Instrument, Cometech,Testex Instrument dan lain - lain.

YASUDA SEIKI - No.220 Dart Impact Tester

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :