Tawk.to

PT.Mora Anugerah Berkat

PT.Mora Anugerah Berkat adalah perusahaan penyedia alat – alat laboratorium, alat laboratorium yang kami sediakan meliputi : general laboratorium equipment,medical equipment (alat kesehatan), environmental (alat uji lingkungan), chemical/reagent consumable,mineral/civil material testing dan kalibrasi.

About Us

Tampilkan postingan dengan label falling ball impact tester price. Tampilkan semua postingan

Drop Ball Impact Test Equipment

  


PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat material testing equipment khusus industrial testing seperti pengujian plastic, rubber, film/tape dan polymer salah satu diantaranya yang kami supply adalah Falling Ball Impact Test. 

Drop Ball Impact Test Equipment

  • No.183 Falling Ball Impact Tester
  • Standard Method : JIS-(K5400), K5600-5-3, (K6718), (K6745), K7211, ISO-6272
  • This tester is used to evaluate the impact resistance of rigid plastic, coating etc.
  • The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.

SPECIFICATION
No.183 FALLING BALL IMPACT TESTER

Falling Height

50 to Max. 1,000 mm (Pitch 50 mm)

50 to Max. 2,000 mm (Pitch 50 mm)

Falling Weight

Depends on the Standards

Specimen Holder

Depends on the Standards

Accessories

Spirit Level: 1 pc, Foot Switch

Power Source

AC 100 V, 1-Phase, 3 A, 50/60 Hz

Dimensions /

Tester Body: W660 × D460 × H2,

000 to 2,500 mm,

Weight (Approx.)

100 to 115 kg

Control Box: W200 × D280 × H215 mm, 7 kg


  • No.181 FILM IMPACT TESTER
  • Standard Method : ASTM-D3420
  • This tester is used to evaluate the impact resistance of rigid plastic, coating etc.
  • The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.

Drop Ball Impact Test Equipment

  • No.181-L FILM IMPACT TESTER (With Refrigerating Machine)
  • Standard Method : ASTM-D3420
  • This tester is used to evaluate the impact hole punching endurance of plastic film, paper etc.
  • A hemispherical impact ball is attached to the head of the pendulum so that the impact workload to punch a hole into the test specimen can be directly read on the scale.
  • The tester can also be assorted with a low temperature chamber to conduct the impact test at low temperature.


SPECIFICATION FILM IMPACT TESTER
ModelNO.181
FILM IMPACT TESTER		NO.181-L FILM IMPACT TESTER
(WITH REFRIGERATING MACHINE)
Capacity0 to 1.5 J (Scale 0.05 J),0 to 3.0 J (Scale 0.1 J)
(2 ranges)
0 to 3.0 J (Scale 0.1 J), 0 to 6.0 J (Scale 0.2 J)		0 to 1.5 J (Scale 0.05 J),0 to 3.0 J (Scale 0.1 J)
(2 ranges)
0 to 3.0 J (Scale 0.1 J),0 to 6.0 J (Scale 0.2 J)
Impact HeadHemispherical shape, R12.7 mm, R6.35 mmHemispherical shape, R12.7 mm, R6.35 mm
Lift-Up Angle90° (Additional Weight type)60°, 90° (2 Stage Type)
Specimenφ80 mmφ80 mm
ClampInner φ60 mmInner φ60 mm
Temperature Range―-35 °C to 60 °C (Refrigerator)
OptionDigital Display Ver.Digital Display Ver.
Power Source―AC 200 V, 3-Phase, 20 A, 50/60 Hz
Dimensions / Weight
(Approx.)		W600 × D190 × H460 mm, 32 kgW1,080 × D700 × H930 mm, 150 kg

Jika anda membutuhkan/mencari alat Falling Ball Impact Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap memjawab segala kebutuhan anda khususnya untuk alat uji Falling Ball Impact Testing Machine.

Drop Ball Impact Test Equipment

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :

Drop Ball Impact Testing di Sidoarjo

 


PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat material testing equipment khusus industrial testing seperti pengujian plastic, rubber, film/tape dan polymer salah satu diantaranya yang kami supply adalah Falling Ball Impact Test. 

Drop Ball Impact Testing di Sidoarjo

  • No.183 Falling Ball Impact Tester
  • Standard Method : JIS-(K5400), K5600-5-3, (K6718), (K6745), K7211, ISO-6272
  • This tester is used to evaluate the impact resistance of rigid plastic, coating etc.
  • The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.

SPECIFICATION
No.183 FALLING BALL IMPACT TESTER

Falling Height

50 to Max. 1,000 mm (Pitch 50 mm)

50 to Max. 2,000 mm (Pitch 50 mm)

Falling Weight

Depends on the Standards

Specimen Holder

Depends on the Standards

Accessories

Spirit Level: 1 pc, Foot Switch

Power Source

AC 100 V, 1-Phase, 3 A, 50/60 Hz

Dimensions /

Tester Body: W660 × D460 × H2,

000 to 2,500 mm,

Weight (Approx.)

100 to 115 kg

Control Box: W200 × D280 × H215 mm, 7 kg


  • No.181 FILM IMPACT TESTER
  • Standard Method : ASTM-D3420
  • This tester is used to evaluate the impact resistance of rigid plastic, coating etc.
  • The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.

Drop Ball Impact Testing di Sidoarjo

  • No.181-L FILM IMPACT TESTER (With Refrigerating Machine)
  • Standard Method : ASTM-D3420
  • This tester is used to evaluate the impact hole punching endurance of plastic film, paper etc.
  • A hemispherical impact ball is attached to the head of the pendulum so that the impact workload to punch a hole into the test specimen can be directly read on the scale.
  • The tester can also be assorted with a low temperature chamber to conduct the impact test at low temperature.


SPECIFICATION FILM IMPACT TESTER
ModelNO.181
FILM IMPACT TESTER		NO.181-L FILM IMPACT TESTER
(WITH REFRIGERATING MACHINE)
Capacity0 to 1.5 J (Scale 0.05 J),0 to 3.0 J (Scale 0.1 J)
(2 ranges)
0 to 3.0 J (Scale 0.1 J), 0 to 6.0 J (Scale 0.2 J)		0 to 1.5 J (Scale 0.05 J),0 to 3.0 J (Scale 0.1 J)
(2 ranges)
0 to 3.0 J (Scale 0.1 J),0 to 6.0 J (Scale 0.2 J)
Impact HeadHemispherical shape, R12.7 mm, R6.35 mmHemispherical shape, R12.7 mm, R6.35 mm
Lift-Up Angle90° (Additional Weight type)60°, 90° (2 Stage Type)
Specimenφ80 mmφ80 mm
ClampInner φ60 mmInner φ60 mm
Temperature Range―-35 °C to 60 °C (Refrigerator)
OptionDigital Display Ver.Digital Display Ver.
Power Source―AC 200 V, 3-Phase, 20 A, 50/60 Hz
Dimensions / Weight
(Approx.)		W600 × D190 × H460 mm, 32 kgW1,080 × D700 × H930 mm, 150 kg

Jika anda membutuhkan/mencari alat Falling Ball Impact Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap memjawab segala kebutuhan anda khususnya untuk alat uji Falling Ball Impact Testing Machine.

Drop Ball Impact Testing di Sidoarjo

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :

Drop Ball Impact Testing Machine di Tuban

  


PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat material testing equipment khusus industrial testing seperti pengujian plastic, rubber, film/tape dan polymer salah satu diantaranya yang kami supply adalah Falling Ball Impact Test. 

Drop Ball Impact Testing Machine di Tuban

  • No.183 Falling Ball Impact Tester
  • Standard Method : JIS-(K5400), K5600-5-3, (K6718), (K6745), K7211, ISO-6272
  • This tester is used to evaluate the impact resistance of rigid plastic, coating etc.
  • The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.

SPECIFICATION
No.183 FALLING BALL IMPACT TESTER

Falling Height

50 to Max. 1,000 mm (Pitch 50 mm)

50 to Max. 2,000 mm (Pitch 50 mm)

Falling Weight

Depends on the Standards

Specimen Holder

Depends on the Standards

Accessories

Spirit Level: 1 pc, Foot Switch

Power Source

AC 100 V, 1-Phase, 3 A, 50/60 Hz

Dimensions /

Tester Body: W660 × D460 × H2,

000 to 2,500 mm,

Weight (Approx.)

100 to 115 kg

Control Box: W200 × D280 × H215 mm, 7 kg


  • No.181 FILM IMPACT TESTER
  • Standard Method : ASTM-D3420
  • This tester is used to evaluate the impact resistance of rigid plastic, coating etc.
  • The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.

Drop Ball Impact Testing Machine di Tuban

  • No.181-L FILM IMPACT TESTER (With Refrigerating Machine)
  • Standard Method : ASTM-D3420
  • This tester is used to evaluate the impact hole punching endurance of plastic film, paper etc.
  • A hemispherical impact ball is attached to the head of the pendulum so that the impact workload to punch a hole into the test specimen can be directly read on the scale.
  • The tester can also be assorted with a low temperature chamber to conduct the impact test at low temperature.


SPECIFICATION FILM IMPACT TESTER
ModelNO.181
FILM IMPACT TESTER		NO.181-L FILM IMPACT TESTER
(WITH REFRIGERATING MACHINE)
Capacity0 to 1.5 J (Scale 0.05 J),0 to 3.0 J (Scale 0.1 J)
(2 ranges)
0 to 3.0 J (Scale 0.1 J), 0 to 6.0 J (Scale 0.2 J)		0 to 1.5 J (Scale 0.05 J),0 to 3.0 J (Scale 0.1 J)
(2 ranges)
0 to 3.0 J (Scale 0.1 J),0 to 6.0 J (Scale 0.2 J)
Impact HeadHemispherical shape, R12.7 mm, R6.35 mmHemispherical shape, R12.7 mm, R6.35 mm
Lift-Up Angle90° (Additional Weight type)60°, 90° (2 Stage Type)
Specimenφ80 mmφ80 mm
ClampInner φ60 mmInner φ60 mm
Temperature Range―-35 °C to 60 °C (Refrigerator)
OptionDigital Display Ver.Digital Display Ver.
Power Source―AC 200 V, 3-Phase, 20 A, 50/60 Hz
Dimensions / Weight
(Approx.)		W600 × D190 × H460 mm, 32 kgW1,080 × D700 × H930 mm, 150 kg

Jika anda membutuhkan/mencari alat Falling Ball Impact Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap memjawab segala kebutuhan anda khususnya untuk alat uji Falling Ball Impact Testing Machine.

Drop Ball Impact Testing Machine di Tuban

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :

Drop Ball Impact Testing Machine di Kawasan EJIP

 


PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat material testing equipment khusus industrial testing seperti pengujian plastic, rubber, film/tape dan polymer salah satu diantaranya yang kami supply adalah Falling Ball Impact Test. 

Drop Ball Impact Testing Machine di Kawasan EJIP

  • No.183 Falling Ball Impact Tester
  • Standard Method : JIS-(K5400), K5600-5-3, (K6718), (K6745), K7211, ISO-6272
  • This tester is used to evaluate the impact resistance of rigid plastic, coating etc.
  • The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.

SPECIFICATION
No.183 FALLING BALL IMPACT TESTER

Falling Height

50 to Max. 1,000 mm (Pitch 50 mm)

50 to Max. 2,000 mm (Pitch 50 mm)

Falling Weight

Depends on the Standards

Specimen Holder

Depends on the Standards

Accessories

Spirit Level: 1 pc, Foot Switch

Power Source

AC 100 V, 1-Phase, 3 A, 50/60 Hz

Dimensions /

Tester Body: W660 × D460 × H2,

000 to 2,500 mm,

Weight (Approx.)

100 to 115 kg

Control Box: W200 × D280 × H215 mm, 7 kg


  • No.181 FILM IMPACT TESTER
  • Standard Method : ASTM-D3420
  • This tester is used to evaluate the impact resistance of rigid plastic, coating etc.
  • The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.

Drop Ball Impact Testing Machine di Kawasan EJIP

  • No.181-L FILM IMPACT TESTER (With Refrigerating Machine)
  • Standard Method : ASTM-D3420
  • This tester is used to evaluate the impact hole punching endurance of plastic film, paper etc.
  • A hemispherical impact ball is attached to the head of the pendulum so that the impact workload to punch a hole into the test specimen can be directly read on the scale.
  • The tester can also be assorted with a low temperature chamber to conduct the impact test at low temperature.


SPECIFICATION FILM IMPACT TESTER
ModelNO.181
FILM IMPACT TESTER		NO.181-L FILM IMPACT TESTER
(WITH REFRIGERATING MACHINE)
Capacity0 to 1.5 J (Scale 0.05 J),0 to 3.0 J (Scale 0.1 J)
(2 ranges)
0 to 3.0 J (Scale 0.1 J), 0 to 6.0 J (Scale 0.2 J)		0 to 1.5 J (Scale 0.05 J),0 to 3.0 J (Scale 0.1 J)
(2 ranges)
0 to 3.0 J (Scale 0.1 J),0 to 6.0 J (Scale 0.2 J)
Impact HeadHemispherical shape, R12.7 mm, R6.35 mmHemispherical shape, R12.7 mm, R6.35 mm
Lift-Up Angle90° (Additional Weight type)60°, 90° (2 Stage Type)
Specimenφ80 mmφ80 mm
ClampInner φ60 mmInner φ60 mm
Temperature Range―-35 °C to 60 °C (Refrigerator)
OptionDigital Display Ver.Digital Display Ver.
Power Source―AC 200 V, 3-Phase, 20 A, 50/60 Hz
Dimensions / Weight
(Approx.)		W600 × D190 × H460 mm, 32 kgW1,080 × D700 × H930 mm, 150 kg

Jika anda membutuhkan/mencari alat Falling Ball Impact Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap memjawab segala kebutuhan anda khususnya untuk alat uji Falling Ball Impact Testing Machine.

Drop Ball Impact Testing Machine di Kawasan EJIP

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :
Langganan: Postingan (Atom)