MELT FLOW INDEX TESTER (MANUAL) - PT.MAB

Melt Flow Index Tester - PT. Mora Anugerah Berkat

Melt Flow Index Tester - PT. Mora Anugerah Berkat

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti : Melt Flow Index Test.

• No.120-SAS MELT FLOW INDEX TESTER (AUTOMATIC)
• Standard Method : JIS-K6719-1/2, K6921-2, K6922-2, K6923-1, K6924-1, K6926-2, K7210, ASTM-D1238, ISO-1133
• This tester is used to measure the melt flow index of thermo-plastic.
• The melt flow index is acquired from the weight or the volume of the extruded specimen at a specified cylinder temperature and with a specified load of piston through the die.
• The tester is assorted with an automatic cleaning system which enables to perform 1 test cycle without discontinuation (option of 3 test cycles).
• Click Here : Melt Flow Index (Automatic) Product

No.120-SAS MELT FLOW INDEX TESTER (AUTOMATIC)
Specification
Hangings	1 or 3 Hangings (2 kinds)
Die	φ2.095 ± 0.005 mm, L8.000 ± 0.025 mm
Piston	Head Diameter φ9.474 ± 0.007 mm, Head Length L6.35 ± 0.10 mm
Cylinder	Inner φ9.550 ± 0.007 mm, L160 mm
Temperature Range	Max. 300 °C (Option: Max. 400 °C)
Weight Loading	Choose the Largest Load from 0.325, 1.20, 2.16, 3.80, 5.00, 10.00, 21.60 kgf
Test Method	Method A: Manual (Option: Automatic) Method B: Automatic
Specimen Feeding	Automatic
Weight Loading	Automatic
Weight Change	Manual (Option: Automatic)
Cylinder Cleaning	Automatic (Solvent Cleaning can also be Automatic)
Die Cleaning	Automatic
Piston Cleaning	Manual (Option: Automatic)
Die Cleaning Rod Cleaning	Manual (Option: Automatic)
Cleaning Gauze Feeding	Manual
Data Processing	Method A: Manual (Option: Automatic) Method B: Automatic
Method B Measuring	Rotary Encoder
Software	Windows Compatible
Accessories	Cleaning Rod (Die, Cylinder), Solvent Cleaning Device, Specimen Cup, Cup Holder, Infundibulum, Die Gauge, Spirit Level, Dust Box, Gauze, Air Gun
	Hastelloy Spec, Specimen Purging Device, Specimen Drying Device,Air Compressor, Temperature Calibration Device,Exhaust Fan (Standard for No.120-LABOT),Smoke-Detection Sensor (Standard for No.120-LABOT)
Option	AC 200 V, 1-Phase, 10 A, 50/60 Hz AC 200 V, 1-Phase, 15 A, 50/60 Hz (ISO-1133-2 Compatable Type)
Air Source	0.5 MPa or More
Power Source	1 Hanging: W675× D645 × H1,370 mm/200 kg 3 Hangings: W675 × D725 × H1,370 mm/ 220 kg
Air Source	0.5 MPa or More
Dimensions / Weight (Approx.)	1 Hanging: W675× D645 × H1,370 mm/200 kg 3 Hangings: W675 × D725 × H1,370 mm/ 220 kg

=========================================

Melt Flow Index Tester - PT. Mora Anugerah Berkat

=========================================

• No.120-LABOT MELT FLOW INDEX TESTER (FULL AUTOMATIC)
• Standard Method : JIS-K6719-1/2, K6921-2, K6922-2, K6923-1, K6924-1, K6926-2, K7210, ASTM-D1238, ISO-1133
• This tester is equipped with robotic mechanism which enables fully automatic melt flow index tests up to a maximum of 50 samples (standard of 12 samples).
• The test conditions and the outputs can be set and observed through the computer software.
• Click Here : Melt Flow Index (Fully Automatic) Product

No.120-LABOT MELT FLOW INDEX TESTER (FULL AUTOMATIC)
Specification
Hangings	12, 24, 50 Hangings (3 kinds)
Die	φ2.095 ± 0.005 mm, L8.000 ± 0.025 mm
Piston	Head Diameter φ9.474 ± 0.007 mm, Head Length L6.35 ± 0.10 mm
Cylinder	Inner φ9.550 ± 0.007 mm, L160 mm
Temperature Range	Max. 300 °C (Option: 400 °C)
Weight Loading	0.325, 1.20, 2.16, 3.80, 5.00, 10.00 kgf and 21.60 kgf
Test Method	Method A : Manual (Option: Automatic) Method B: Automatic
Specimen Feeding	Automatic
Weight Loading	Automatic
Weight Change	Manual (Option: Automatic)
Cylinder Cleaning	Automatic (Solvent cleaning can also be automatic)
Die Cleaning	Automatic
Piston Cleaning	Automatic
Die Cleaning Rod Cleaning	Automatic
Cleaning Gauze Feeding	Automatic
Data Processing	Method A: Manual (Option: Automatic) Method B: Automatic
Method B Measuring	Rotary Encoder
Software	Windows Compatible
Accessories	Cleaning Rod (Die & Cylinder), Solvent Cleaning Device,Specimen Cup, Cup Holder, Infundibulum, Die Gauge,Spirit Level, Dust Box, Gauze, Air Gun
Option	Hastelloy Spec, Specimen Purging Device, Specimen Drying Device, Air Compressor, Temperature Calibration Device, Exhaust Fan, Smoke-Detection Sensor
Air Source	0.5 MPa or More
Dimensions / Weight (Approx.)	12, 24Hangings : W950 × D700 × H1,750 mm/ 300 kg50 Hangings: W1,100 × D700 × H1,750 mm/ 350 kg
Power Source	AC 100 V, 1-Phase, 15 A, 50/60 HzAC 200 V, 1-Phase, 20 A, 50/60 Hz (ISO-1133-2 Compatable Type)

=========================================

Melt Flow Index Tester - PT. Mora Anugerah Berkat

=========================================

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti : Melt Flow Index Test ; Jika anda membutuhkan/mencari alat Melt Flow Index Tester - PT. Mora Anugerah Berkat yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk alat uji Melt Flow Index Test.

Melt Flow Index Tester - PT. Mora Anugerah Berkat

• PT. Mora Anugerah Berkat (M.A.B)
• Click Here: Melt Flow Index Tester Brochure
• Alamat : Jl. Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten 
• Phone : 021 7345.7064
• Mobile : 0812.8140.0749/0812.8770.5470  
• Chat : Whats App,Line,WeChat,Telegram
• Website : www.moraanugerah.id -
•                   www.moraanugerah.com
• Email : info@moraanugerah.com -
•              marketing@moraanugerah.com -
•              marketing_div@moraanugerah.com