Tawk.to

PT.Mora Anugerah Berkat adalah perusahaan penyedia alat – alat laboratorium, alat laboratorium yang kami sediakan meliputi : general laboratorium equipment,medical equipment (alat kesehatan), environmental (alat uji lingkungan), chemical/reagent consumable,mineral/civil material testing dan kalibrasi.

THERMOSTATIC SYSTEM, TWO VICATRONIC

   





THERMOSTATIC SYSTEM, TWO VICATRONIC


 




THERMOSTATIC SYSTEM, TWO VICATRONIC

To measure the setting time of the mortar, Matest offers a wide selection of automatic or manual devices. For these devices, different models of penetration needles and molds are available in compliance with ASTM, AASHTO, EN and BS standards.

The test consists in performing different penetrations in the specimen during the period of time that goes from the forming inside the special mold to the hardening of the mixture.

E055N

Vicat Apparatus (Cement - Mortar)

Standard Method : EN 13279-2 (GYPSUM) EN 480-2 ASTM C191 AASHTO T131 NF P15-414 NF P15-431 EN 196-3

DETERMINATION OF SETTING TIME AND CONSISTENCY OF CEMENT.

  • The instrument consists of a metallic frame, graduated scale with index, sliding probe of 300 g, consistency plunger Ø 10 mm, glass base plate. 
  • The needle and conical mould are not included and have to be ordered separately accordind to the selected Standard.
  • Dimensions : 160 x 200 x 300 mm 
  • Weight          : 5 Kg approx.
  • Click Here    : Vicat Apparatus Brochure 

NEEDED ACCESSORIES : 

  • E046N         Needle, hardened Ø 1.13 mm EN 196-3:2005 
  • E046-01N   Needle, hardened Ø 1 mm ASTM - AASHTO 
  • E055-10      Conical plastic mould Ø 70/80 h 40 mm (EN - NF) 
  • E055-05      Conical plastic mould Ø 60/70 h 40 mm (ASTM - AASHTO)

CONICAL MOULDS TO BS, DIN, UNI SPECIFICATIONS :

  • E055-04 : Conical plastic mould Ø 80/90 h 40 mm (UNI)
  • E055-13 : Conical plastic mould Ø 65/75 h 40 mm (DIN)
  • E055-11 : Conical plastic mould Ø 80/90 h 40 mm (BS)

====================

THERMOSTATIC SYSTEM, TWO VICATRONIC

E044-03N
Vicatronic Continuous Penetration (Cement - Mortar)

  • Standard Method : EN 196-3 EN 480-2 EN 13279-2 (GYPSUM) ASTM C187 ASTM C191 DIN 1168 DIN 1196 NF P15-414 NF P15-431 AASHTO T131
  • VICATRONIC, identical to model E044N, but with possibility of continuous penetrations each 15 seconds.
  • Click Here : Vicatronic Continuous Penetration Brochure 

====================

THERMOSTATIC SYSTEM, TWO VICATRONIC

E044N
Vicatronic, Automatic Vicat Apparatus (Cement - Mortar)

Standard Method : EN 13279-2 (GYPSUM) EN 480-2 ASTM C187 ASTM C191 DIN 1168 DIN 1196 NF P15-414 NF P15-431 AASHTO T131 EN 196-3

THE WORLD'S MOST POPULAR AUTOMATIC VICAT APPARATUS

Vicatronic is an automatic computerized tropicalized vicat recording apparatus, designed and manufactured using the most recent and sophisticated technology. Vicatronic is used for the initial and final setting time determination of cements or mortar pastes.
The unit is manufactured with anticorrosion and tropicalised components to be used in places with humidity not below 90% and 20°C. controlled temperature as required by EN Specifications.
The entire test is made in a fully automatic way and gives a very precise and repeatable result. Results are printed on the incorporated printer and this eliminates the manual operations of installing and zeroing the paper graph on the drum.
The use of the appliance is extremely simplified by the guiding menu that is available in english, french, spanish, german, italian language.

Main Features 
  • Large high contrast and high resolution LCD screen
  • Real time graphic display of the test
  • Fully automatic test performance
  • Customizable programs for research tests
  • Suitable to operate through the embedded control unit or a separate PC
  • Click Here : Vicatronics,Automatic Vicat Apparatus Brochure

The Vicatronic is supplied complete with the incorporated printer, two hardened needles (one with 1 mm diameter and one with 1,13 mm. diameter), two conical moulds EN and ASTM, a glass plate to hold the conical mould.

Power supply : 230 V 1 Ph 50/60 Hz. 50W
Dimensions    : 400 x 200 x 470 mm
Weight              : 13 kg

====================

THERMOSTATIC SYSTEM, TWO VICATRONIC

E044-06
Thermostatic System, Two Vicatronic (Cement - Mortar)

THERMOSTATIC CONTROLLED HEATING AND COOLING SYSTEM - TWO VICATRONIC

The device produces water with suitable heating and cooling elements at controlled temperature of 20 °C ± 0.5 °C.
The water is forced into the tank E043 and then back to the bath allowing to perform the test at controlled temperature and humidity as requested by EN196-3 Standard. The system accepts ONE or TWO Vicatronic.

Specifications
  • Water capacity : 7.5 litres approx.
  • Optimized temperature range : 15 to 25 °C
  • Accuracy : ± 0.5 °C
  • Power supply : 230V 1ph 50-60Hz 350W
  • Dimensions : 415 x 300 x 420 mm approx.
  • Weight : 20 kg approx.
  • Click Here : Thermostatic System, Two Vicatronics Brochure

GYPSUM TEST

Standard Method : EN 13279-2 | DIN 1168 

Code : E044-40 N 

CONICAL PENETRATION NEEDLE,

having 8 mm of diameter and 50 mm long, to make gypsum tests following EN, DIN Specifications.


E044-41 N

PROBE 100 g, to make test on gypsum following EN, DIN Specifications.  

E044-30      

NEEDLE CLEANING DEVICE It removes the residual cement particles from the needle keeping it constantly lubricated.

E042-02N     

CONSISTENCY PLUNGER Ø 10x50 mm

E042N          

NEEDLE for final setting Ø 1.13 mm, BS, EN 196-3

E042-01N     

NEEDLE for final setting ASTM 1 mm diameter.

E044-45  

ADDITIONAL 700 g WEIGHT (EN, NF)

E055-04      

PLASTIC MOULD Ø 80/90x40 mm high following UNI

E055-11

BRASS MOULD Ø 80/90x40 mm high following BS

E055-13  

PLASTIC MOULD Ø 65/75x40 mm high following DIN

SPARES

E046N          

Ø 1.13 mm hardened needle (EN 196-3)

E046-01N     

Ø 1 mm hardened needle (ASTM)

E055-05    

Plastic mould Ø 60/70 x 40 mm high following ASTM

E055-07       

Glass base plate

E055-10   

Plastic mould Ø 70/80 x 40 mm. high following EN, NF

E042-06N     

Probe 300 g to EN 196-3

E044-48N  

Tang to fix the needle to the probe

C127-11 

Thermo-paper roll for printer (pack of 10 rolls)



PT.Mora Anugerah Berkat adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan laboratorium untuk sipil/pertambangan seperti Matest - Automated Core Drill (ACD), kami juga menyediakan peralatan baik lokal maupun custom (khusus) yang sudah teruji dan sesuai dengan ASTM,kami juga menyediakan berbagai brand/merk internasional dari USA,Eropa dan China,produk internasional yang kami supply/tawarkan seperti : MATEST, GILSON, FORNEY, HUMBOLDT, CONTROL, ELE, UTEST, RETSCH, Endecotts, HMP, PROCEQ,HILTI dan lain - lain.


THERMOSTATIC SYSTEM, TWO VICATRONIC


Kami juga menyediakan Jasa Perbaikan (SERVICE),Jasa Perawatan (Maintenace) dan support untuk KALIBRASI/AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda

  • PT. Mora Anugerah Berkat (M.A.B)

  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten

  • Phone : 021 7345.7064 / 7366.0160

  • Mobile: 0812.8140.0749 / 0812.8770.5470 

  • Chat : Whats App,Line,WeChat,Telegram

  • Website: www.moraanugerah.id -

  • www.moraanugerah.com

  • Email : info@moraanugerah.com - info@moraanugerah.id -marketing_div@moraanugerah.com


0 Komentar: