Tawk.to

PT.Mora Anugerah Berkat adalah perusahaan penyedia alat – alat laboratorium, alat laboratorium yang kami sediakan meliputi : general laboratorium equipment,medical equipment (alat kesehatan), environmental (alat uji lingkungan), chemical/reagent consumable,mineral/civil material testing dan kalibrasi.

DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER

 



DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER






DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak dalam bidang industrial laboratorium testing equipment khususnya plastik, rubber, film/tape and polymer material testing salah satu diantaranya adalah DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER, berikut adalah tipe dan spesifikasi dari No.119 De Mattia Flex-Cracking Tester seperti di bawah ini : 

  • No.119 DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER
  • Standard Method : JIS-K6260、ASTM-D813、BS-903、ISO-132
  • This tester is used to measure the appearance of cracks and the growth of the cracks to vulcanized rubber and thermo-plastic rubber by adding repetitive bending stress. The test is conducted by setting the test specimen to the parallel allocated Chuck and adding repetitive bending stress. The tester can also be assorted with a low temperature oven (L type).
  • CLICK HERE : YASUDA SEIKI No.119 De Mattia Flex Cracking and Growth Tester Brochure

No.119 DE MATTIA FLEX-CRACKING
AND CRACK GROWTH TESTER
Spesifikasi
Hangings6 Hangings
SpecimenW25 ± 1 mm, L140 to 155 mm,
T6.30 ± 0.15 mm,
Groove of R 2.38 ± 0.03 mm
Chuck
Distance
Max. 75 + 1 mm
Flexing
Distance
Max. 60 mm
(Standard 57 + 0.5 mm)
Flexing
Speed
300 ± 10 times/min
Counter6 Digits Preset Counter,
6 Digits Running Counter
Temperature
Range
-35 to 150 °C (Refrigerator)
AccessoriesSpecimen Setting Gauge,
Notching Blade
OptionNotching Device
Power SourceAC 200 V, 3-Phase,
40 A, 50/60 Hz
Dimensions /
Weight (Approx.)
W700 × D610 × H980 mm /
180 kg

===========================================================

DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER

  • No.119-L DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER (WITH REFRIGERATING MACHINE)
  • Standard Method : JIS-K6260、ASTM-D813、BS-903、ISO-132
  • This tester is used to measure the appearance of cracks and the growth of the cracks to vulcanized rubber and thermo-plastic rubber by adding repetitive bending stress. The test is conducted by setting the test specimen to the parallel allocated Chuck and adding repetitive bending stress.
  • CLICK HERE : YASUDA SEIKI No.119 De Mattia Flex Cracking and Growth Tester Brochure 

No.119-L DE MATTIA FLEX-CRACKING AND
CRACK GROWTH TESTER (WITH REFRIGERATING MACHINE)
Spesifikasi
Hangings6 Hangings, 20 Hangings
SpecimenW25 ± 0.1 mm, L140 to 155 mm,
T6.30 ± 0.15 mm,
Groove of R2.38 ± 0.03 mm
Chuck
Distance
Max. 75 + 1 mm
Flexing
Distance
Max. 60 mm
(Standard 57 + 0.5 mm)
Flexing
Speed
300 ± 10 times/min
Counter6 Digits Preset Counter,
6 Digits Running Counter
Temperature
Range
-35 to 60 °C (Refrigerator)
AccessoriesSpecimen Setting Gauge,
Notching Blade
OptionNotching Device
Power SourceAC 200 V, 3-Phase, 40 A, 50/60 Hz
Dimensions /
Weight (Approx.)
6 Hangings :
W920 × D830 × H1,650 mm / 470 kg
20 Hangings :
W920 × D830 × H1,650 mm / 500 kg

===========================================================

DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER

  • No.119-L-VR DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER (WITH REFRIGERATING MACHINE/ PICTURE BREAK DETECTION FUNCTION)
  • Standard Method : JIS-K6260、ASTM-D813、BS-903、ISO-132
  • This tester is equipped with a super-high-speed camera, which enables the operator to observe and save the appearance and the growth of the cracks. Since the test can be monitored by the super-high-speed camera, the test can be run without any discontinuance.
  • CLICK HERE : YASUDA SEIKI No.119 De Mattia Flex Cracking and Growth Tester Brochure 

No.119-L-VR DE MATTIA FLEX-CRACKING AND
CRACK GROWTH TESTER
(WITH REFRIGERATING MACHINE /
PICTURE BREAK DETECTION FUNCTION)
Spesifikasi
Hangings12 Hangings
Specimen
W25 ± 1 mm , L140 to 155 mm,
T6.30 ± 0.15 mm,
Groove of R 2.38 ± 0.03 mm
Chuck DistanceMax. 75 + 1 mm
Flexing Distance
Max. 60 mm  (Standard 57 + 0.5 mm)
Flexing Speed300 ± 10 times/min
Counter
8 Digits Preset Counter,
8 Digits Running Counter
TimerMax. 999 hr
Temperature Range-35 to 60 °C (Refrigerator)
Break DetectionHigh Speed Digital Picture Camera
Accessories
Specimen Setting Gauge,
Notching Blade
OptionNotching Device
Power Source
AC 200 V, 3-Phase,
40 A, 50/60 Hz
Dimensions /
Weight (Approx.)
W1,100 × D1,000 × H1,825 mm / 450 kg
N

PT. Mora Anugerah Berkat (M. A. B) adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan industrial material testing equipment seperti DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER , kami juga menyediakan peralatan yang sudah teruji dan sesuai dengan standard seperti ASTM, JIS dan lain-lain ; kami juga menyediakan berbagai brand / merk internasional dari USA, Eropa dan China,produk internasional yang kami supply / tawarkan seperti : Yasuda Seiki, Qualitest, Toyoseiki, Drick Instrument, Cometech,Testex Instrument dan lain - lain. 

DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 

  • PT. Mora Anugerah Berkat [M.A.B]
  • CLICK HERE : YASUDA SEIKI No.145 CREEP TESTING Brochure
  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan, Kota Tangerang - Provinsi Banten 
  • Phone : 021 7345.7064 / 7366.0160
  • Mobile : 0812.8140.0749 / 0812.8770.5470
  • Chat : Whats App, Line, WeChat, Telegram 
  • Website : www.moraanugerah.id - www.moraanugerah.com
  • Email : info@moraanugerah.com - info@moraanugerah.id -  
  •  marketing_div@moraanugerah.com - marketing@moraanugerah.com  

0 Komentar: