Tawk.to

PT.Mora Anugerah Berkat adalah perusahaan penyedia alat – alat laboratorium, alat laboratorium yang kami sediakan meliputi : general laboratorium equipment,medical equipment (alat kesehatan), environmental (alat uji lingkungan), chemical/reagent consumable,mineral/civil material testing dan kalibrasi.

About Us

UNIVERSAL IMPACT TESTER and UNIVERSAL MATERIAL TESTER


UNIVERSAL IMPACT TESTER





Standard

JIS-K7111 # ASTM-D256 # D6110 # ISO-179 # 180

This pendulum type Charpy impact tester can automatically conduct the test cycle, and is capable of testing at extremely low temperatures (as low as -70°C). Test conditions are inputted via touch screen and a maximum of 210 specimens can be tested continuously. Due to the high capability of the refrigerating system, it is both time and cost efficient when compared to any other model.

   UNIVERSAL MATERIAL TESTER



Capable of Testing Strain, Compression, and 3 Point Bending
This universal tensile elongation/ compression tester (Auto Strain/ Strograph) is best suited for plastic and rubber. The tester capacity comes in either a maximum of 5 kN or 10 kN respectively. The test specimen is attached to chucks on both ends and is applied elongation/ compression force continuously through loadcell until breakage. Tester control and tensile strength calculation are both conducted via touch panel interface.

Untuk Infromasi dan Pemesanan Silahkan Kunjungi dan Hubungi Kami Di
PT.Mora Anugerah Berkat
Ph.+62 21 7345 7064/7366 0160
Fax.+62 21 7366 0160
Mobile :
0812 8770 5470 (What Apps,Line,We Chat,Telegram)
0812 8140 0749 (What Apps,Line,We Chat,Telegram)
Website :
www.moraanugerah.id
Email :
info@moraanugerah.id
mora.anugerahberkat@gmail.com 

Harga Laboratorium Analytical Balance Murah di JABODETABEK

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak dalam bidang alat laboratorium measurement seperti laboratorium balance,analytical balance,mass comparators & metrology, industrial weighing, moisture analyzer / moisture balance, weigh cell, weights & weight sets (anak timbangan/timbangan set), paint mixing solutions and weighing accessories. 

Harga Laboratorium Analytical Balance Murah di JABODETABEK

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan supplier alat laboratory measurement equipment yang sudah berpengalaman menjual / mensupply Harga Laboratorium Analytical Balance Murah di JABODETABEK , kami juga menyediakan berbagai Brands/Merek dunia seperti METTLER TOLEDO, OHAUS, PRECISA, RADWAG, A&D, PRECISA dan lain-lain, serta kami juga menyediakan Jasa Perawatan (Maintenance), Jasa Perbaikan (Service) dan membantu Kalibrasi (Calibration) juga menyediakan spare part serta aksessoris untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami. 

Harga Laboratorium Analytical Balance Murah di JABODETABEK

  • PT. Mora Anugerah Berkat [M.A.B]
  • Click Here : Analytical Balance / Timbangan Analitik 
  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan, Kota Tangerang - Provinsi Banten 
  • Phone : 021 7345.7064 
  • Mobile : 0812.8140.0749 / 0821.9402.5775
  • Chat : Whats App, Line, WeChat, Telegram 
  • Website : www.moraanugerah.id -
  •                   www.moraanugerah.com
  • Email : info@moraanugerah.com -
  •                   marketing@moraanugerah.com -
  •                   marketing_div@moraanugerah.com   

Distributor/Agent/Supplier dari Timbangan Analitik / Analytical Balance

Distributor/Agent/Supplier dari Timbangan Analitik / Analytical Balance


Jika anda mencari Distributor/Agent/Supplier dari Timbangan Analitik / Analytical Balance , maka anda bisa menghubungi PT Mora Anugerah Berkat di nomer +622173457064 . Kami berpengalaman menyediakan beragam jenis produk untuk kebutuhan laboratorium di berbagai sektor industri, lembaga riset dan universitas / politeknik PT. Mora Anugerah Berkat (M.A.B) sebagai Supplier / Pemasok  Analytical Balance (Timbangan Analitik), kami menyediakan timbangan analitik terbaik,terlengkap,termurah dan terpercaya. analytical balance (analytical scales)/timbangan digital terdiri dari beberapa merek/brand yang sudah dikenal berikut di antaranya: analytical balance ohaus,sartorius,mattler toledo,kern,Adam Equipment,Digi,CAS Digital Balance, dan masih banyak lagi termasuk analytical balance made in china (buatan cina/china analytical balance).

Distributor/Agent/Supplier dari Timbangan Analitik / Analytical Balance

Timbangan Analitik (Analytical Balance) adalah salah satu alat pelengkap dalam alat laboratorium, analytical balance (timbangan analitik) digunakan untuk pengukuran dengan ketelitian yang sangat presisi, karena ini menetukan hasil, analytical balance (timbangan analitik) terdiri dari :

  1. Timbangan Presisi (Precision Scales/Precision Balance)
  2. Timbangan Analitik (Analytical Scales/Analytic Balance)
  3. Timbangan Semi Mikro (Semi-Micro Scales/Semi-Micro Balance)
  4. Timbangan Micro (Micro Scales / Micro Balance)
  5. Timbangan Ultra Micro (Ultra Micro Scales / Ultra Micro Balance)

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang sudah berpengalaman dalam menyediakan / mensupply peralatan laboratorium untuk measurement,scales/platform scales, balace/analytical balance, moisture balance dan lain-lain, kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China, produk internasional yang kami supply / tawarkan seperti : OHAUS, SARTORIUS, METTLER TOLEDO,RADWAG, KERN, EXCELLENCE dan lain - lain ; Kami juga menyediakan Jasa Perbaikan (Service), Jasa Perawatan (Maintenace) dan support untuk Kalibrasi / Aksessoris Sparepart jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.

Distributor/Agent/Supplier dari Timbangan Analitik / Analytical Balance


  • PT.Mora Anugerah Berkat
  • Alamat : JL. Taman Asri Blok M No.30 Kel. Cipadu Kec.Larangan Kota Tangerang, Provinsi Banten 15155 
  • Phone : (+62)021 7345.7064 
  • Mobile : 0812.8140.0749 / 0812.8770.5470
  • Chat : What Apps, Line, We Chat, Telegram
  • Website : www.moraanugerah.id |
  •                           www.moraanugerah.com
  • Email : info@moraanugerah.com |
  •                    marketing@moraanugerah.com |
  •                    marketing_div@moraanugerah.com

GPS Geodetik


GPS Geodetik

PT.Mora Anugerah Berkat Distributor/Agent/Supplier peralatan surveying yang terlengkap jual/harga gps geodetik dengan brand : Topcon (Topcon gr 5),ruide r90x,rtk/rtk trimble,south (galaxy  /s86/s86s),Hi-Target,Trimble baru dan ada pula yang second. harga dan spesifikasi gps geodetik tersebut berdasarkan pengertian gps geodetik dan fungsi gps geodetic sesuai cara menggunakan gps geodetik tersebut.

GPS  geodetik banyak digunakan pada perusahaan tambang,perusahaan konstruksi (gedung,jalan raya),kementrian PU/Bina Marga Kementerian ATR/BPN,Kementerian Lingkungan Hidup/Kehutanan (Dinas Lingkungan Hidup/Dinas pertanian dan kehutanan)
Kami menjual,mendistribusikan/mensupply kebeberapa daerah seperti : Jakarta,Bandung,Cimahi,Kab Bandung Barat,Surabaya,Makasar,Medan,kalimantan dan seluruh wilayah indonesia
untuk informasi,spesifikasi dan kalibras kunjungi dan hubungi alamat 

GPS Geodetik


PT.Mora Anugerah Berkat Distributor/Agent/Supplier peralatan surveying yang terlengkap jual/harga gps geodetik dengan brand : Topcon (Topcon gr 5),ruide r90x,rtk/rtk trimble,south (galaxy  /s86/s86s),Hi-Target,Trimble baru dan ada pula yang second. harga dan spesifikasi gps geodetik tersebut berdasarkan pengertian gps geodetik dan fungsi gps geodetic sesuai cara menggunakan gps geodetik tersebut
GPS  geodetik banyak digunakan pada perusahaan tambang,perusahaan konstruksi (gedung,jalan raya),kementrian PU/Bina Marga Kementerian ATR/BPN,Kementerian Lingkungan Hidup/Kehutanan (Dinas Lingkungan Hidup/Dinas pertanian dan kehutanan)
Kami menjual,mendistribusikan/mensupply kebeberapa daerah seperti : Jakarta,Bandung,Cimahi,Kab Bandung Barat,Surabaya,Makasar,Medan,kalimantan dan seluruh wilayah indonesia
untuk informasi,spesifikasi dan kalibras kunjungi dan hubungi alamat kami di bawah ini

PT.Mora Anugerah Berkat
Ph.+62 21 7345 7064/7366 0160
Fax.+62 21 7366 0160
Mobile :
0812 8770 5470 (What Apps,Line,We Chat,Telegram)
0812 8140 0749 (What Apps,Line,We Chat,Telegram)
Website :
www.moraanugerah.id
Email :
info@moraanugerah.id
mora.anugerahberkat@gmail.com

Capping Gypsum Taiwan CAPSTONE

   

       


Capping Gypsum Taiwan CAPSTONE


According to ASTM CNS 11297 Standard Practice for Capping Cylindrical Concrete Specimens, there are some key factors for using capping materials :

  1. ASTM C617 4.1: Capping Plates—Neat cement caps and high-strength gypsum paste caps shall be formed against a glass plate at least 6 mm [1⁄4 in.] thick.
  2. ASTM C617 4.2: Suitable alignment devices, such as As: As guide bars or bull's-eye levels, shall be used in conjunction with capping plates to ensure that no single cap will depart from perpendicularity to the axis of a cylindrical specimen by more than 0.5° (approximately equivalent to 3 mm in 300 mm [1 ⁄8 in. in 12 in.]).
  3. ASTM C617 5.1: The strength of the capping material and the thickness of the caps shall
  4. ASTM C617 5.1.3: The compressive strength of capping materials shall be determined by testing 50 mm [2 in.] cubes following the procedure described in Test Method C109/C109M.
  5. According to ASTM C617 5.1.4: The strength Of the capping material shall be determined on receipt of a new lot and at intervals not exceeding three months.
  6. Click Here : CAPSTONE Capping Gypsum


Capping Gypsum Around 30 mins, the strength of the gypsum can reach 5,000~9,000 psi (350~630 kgf/cm2). This type of gypsum is mostly used in the capping material for concrete compression test according to ASTM C617 standard, so our high strength Capping Gypsum the offer the convenient and excellent testing material for civil engineering industry.


Capping Gypsum Taiwan CAPSTONE


Capping Strength Perfomance

Product Capping Gypsum Consist Of :

A. Capping Gypsum S-420

S-420 features the high quality and high strength concrete test capping material. It is designated as the most reliable product by many professional testing labs. The high reputation of S -420 raised the demand. Modern buildings such as high-rise construction request S-420 as the minimum strength as qualification.

The water to gypsum ratio for S-420 is recommended to be 21-22%. After simply mixing with water, the gypsum is ready to use immediately and will be fully solidified after approximately 30 minutes and reach the strength over 420 kgf/cm2, Equals to 6000psi.


With Compressive Strength and Maximum Thickness of Capping Materials.

B. Capping Gypsum S-350

S-350 is the most popular concrete capping products of Capstone Series. S-350 provides the best balance of working ability and strength performance for concrete capping.The water and gypsum ratio for S-350 is recommended to be 23-24%. After simply mixing with water, the gypsum can be used immediately and will fully harden in approximately 30 minutes. with strength reaching over 350 kgf/cm2, equals to 5000psi.


With Compressive Strength and Maximum Thickness of Capping Materials.

C. Capping Gypsum S-280

S-280 is the entry level Concrete capping product of the Capstone Series. It provides the basic compressive strength with the lowest price.

The water-gypsum ratio for S-280 is recommended to be 25-26%. After simply mixing with water, the gypsum can be used immediately and will fully harden inapproximately 30 minutes. With strength reaching over 280 kgf/cm2, equals to 4000psi

With Compressive Strength and Maximum Thickness of Capping Materials

According to the regulations of US ASTM C617 standard, it is allowed to use high strength gypsum in capping cylindrical concrete specimens. Compared with other methods, gypsum capping is the most convenient, efficient, rapid, and safest capping method.


Capping Gypsum Taiwan CAPSTONE


Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 

 

Laser Distance Meter


Laser Distance Meter

PT.Mora Anugerah Berkat Distributor/Supplier/Agent untuk Laser Distance Meter(meter laser), Laser Distance Meter di gunakan untuk mengukur jarak,tinggi dan panjang suatu bidang/ruang Harga Laser Distance Meter/(meter laser) memiliki merek atau brand seperti laser distance meter krisbow, laser distance meter bosch (meteran laser bosch) dan lain-lain dengan spesifikasi laser distance meter 100m - 1000m, berdasarkan cara kerja atau prinsip kerja laser distance meter terbaik

Sebagai Distributor/Supplier/Agen kami sudah menjual dan mensupply ke beberapa daerah seperti : jakarta,bandung,tangerang,banten, surabaya,bali,makasar,medan dan seluruh kabupaten,kota dan propinsi di seluruh indonesia

Untuk Informasi dan Pemesanan Silahkan Kunjungi dan Hubungi kami di

PT.Mora Anugerah Berkat
Ph.+62 21 7345 7064/7366 0160
Fax.+62 21 7366 0160
Mobile :
0812 8770 5470 (What Apps,Line,We Chat,Telegram)
0812 8140 0749 (What Apps,Line,We Chat,Telegram)
Website :
www.moraanugerah.id
Email :
info@moraanugerah.id
mora.anugerahberkat@gmail.com

DE MATTIA FLEX CRACKING TEST

 



No.119 De Mattia Flex Cracking and Growth Tester [YASUDA SEIKI]






DE MATTIA FLEX CRACKING TEST

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak dalam bidang industrial laboratorium testing equipment khususnya plastik, rubber, film/tape and polymer material testing salah satu diantaranya adalah DE MATTIA FLEX CRACKING TEST, berikut adalah tipe dan spesifikasi dari No.119 De Mattia Flex-Cracking Tester seperti di bawah ini : 

  • No.119 DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER
  • Standard Method : JIS-K6260、ASTM-D813、BS-903、ISO-132
  • This tester is used to measure the appearance of cracks and the growth of the cracks to vulcanized rubber and thermo-plastic rubber by adding repetitive bending stress. The test is conducted by setting the test specimen to the parallel allocated Chuck and adding repetitive bending stress. The tester can also be assorted with a low temperature oven (L type).
  • CLICK HERE : YASUDA SEIKI No.119 De Mattia Flex Cracking and Growth Tester Brochure

No.119 DE MATTIA FLEX-CRACKING
AND CRACK GROWTH TESTER
Spesifikasi
Hangings6 Hangings
SpecimenW25 ± 1 mm, L140 to 155 mm,
T6.30 ± 0.15 mm,
Groove of R 2.38 ± 0.03 mm
Chuck
Distance		Max. 75 ＋ 1 mm
Flexing
Distance		Max. 60 mm
(Standard 57 + 0.5 mm)
Flexing
Speed		300 ± 10 times/min
Counter6 Digits Preset Counter,
6 Digits Running Counter
Temperature
Range		-35 to 150 °C (Refrigerator)
AccessoriesSpecimen Setting Gauge,
Notching Blade
OptionNotching Device
Power SourceAC 200 V, 3-Phase,
40 A, 50/60 Hz
Dimensions /
Weight (Approx.)		W700 × D610 × H980 mm /
180 kg

===========================================================

DE MATTIA FLEX CRACKING TEST

  • No.119-L DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER (WITH REFRIGERATING MACHINE)
  • Standard Method : JIS-K6260、ASTM-D813、BS-903、ISO-132
  • This tester is used to measure the appearance of cracks and the growth of the cracks to vulcanized rubber and thermo-plastic rubber by adding repetitive bending stress. The test is conducted by setting the test specimen to the parallel allocated Chuck and adding repetitive bending stress.
  • CLICK HERE : YASUDA SEIKI No.119 De Mattia Flex Cracking and Growth Tester Brochure 

No.119-L DE MATTIA FLEX-CRACKING AND
CRACK GROWTH TESTER (WITH REFRIGERATING MACHINE)
Spesifikasi
Hangings6 Hangings, 20 Hangings
SpecimenW25 ± 0.1 mm, L140 to 155 mm,
T6.30 ± 0.15 mm,
Groove of R2.38 ± 0.03 mm
Chuck
Distance		Max. 75 + 1 mm
Flexing
Distance		Max. 60 mm
(Standard 57 + 0.5 mm)
Flexing
Speed		300 ± 10 times/min
Counter6 Digits Preset Counter,
6 Digits Running Counter
Temperature
Range		-35 to 60 °C (Refrigerator)
AccessoriesSpecimen Setting Gauge,
Notching Blade
OptionNotching Device
Power SourceAC 200 V, 3-Phase, 40 A, 50/60 Hz
Dimensions /
Weight (Approx.)		6 Hangings :
W920 × D830 × H1,650 mm / 470 kg
20 Hangings :
W920 × D830 × H1,650 mm / 500 kg

===========================================================

DE MATTIA FLEX CRACKING TEST

  • No.119-L-VR DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER (WITH REFRIGERATING MACHINE/ PICTURE BREAK DETECTION FUNCTION)
  • Standard Method : JIS-K6260、ASTM-D813、BS-903、ISO-132
  • This tester is equipped with a super-high-speed camera, which enables the operator to observe and save the appearance and the growth of the cracks. Since the test can be monitored by the super-high-speed camera, the test can be run without any discontinuance.
  • CLICK HERE : YASUDA SEIKI No.119 De Mattia Flex Cracking and Growth Tester Brochure 

No.119-L-VR DE MATTIA FLEX-CRACKING AND
CRACK GROWTH TESTER
(WITH REFRIGERATING MACHINE /
PICTURE BREAK DETECTION FUNCTION)
Spesifikasi
Hangings12 Hangings
Specimen
W25 ± 1 mm , L140 to 155 mm,
T6.30 ± 0.15 mm,
Groove of R 2.38 ± 0.03 mm
Chuck DistanceMax. 75 ＋ 1 mm
Flexing Distance
Max. 60 mm  (Standard 57 + 0.5 mm)
Flexing Speed300 ± 10 times/min
Counter
8 Digits Preset Counter,
8 Digits Running Counter
TimerMax. 999 hr
Temperature Range-35 to 60 °C (Refrigerator)
Break DetectionHigh Speed Digital Picture Camera
Accessories
Specimen Setting Gauge,
Notching Blade
OptionNotching Device
Power Source
AC 200 V, 3-Phase,
40 A, 50/60 Hz
Dimensions /
Weight (Approx.)
W1,100 × D1,000 × H1,825 mm / 450 kg

  • N

PT. Mora Anugerah Berkat (M. A. B) adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan industrial material testing equipment seperti DE MATTIA FLEX CRACKING TEST , kami juga menyediakan peralatan yang sudah teruji dan sesuai dengan standard seperti ASTM, JIS dan lain-lain ; kami juga menyediakan berbagai brand / merk internasional dari USA, Eropa dan China,produk internasional yang kami supply / tawarkan seperti : Yasuda Seiki, Qualitest, Toyoseiki, Drick Instrument, Cometech,Testex Instrument dan lain - lain. 

DE MATTIA FLEX CRACKING TEST

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 

  • PT. Mora Anugerah Berkat [M.A.B]
  • CLICK HERE : YASUDA SEIKI No.145 CREEP TESTING Brochure
  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan, Kota Tangerang - Provinsi Banten 
  • Phone : 021 7345.7064 / 7366.0160
  • Mobile : 0812.8140.0749 / 0812.8770.5470
  • Chat : Whats App, Line, WeChat, Telegram 
  • Website : www.moraanugerah.id - www.moraanugerah.com
  • Email : info@moraanugerah.com - info@moraanugerah.id -  
  •  marketing_div@moraanugerah.com - marketing@moraanugerah.com  

CREEP TESTER TYPE

 

CREEP TESTER TYPE

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti : CREEP TESTER TYPE .

CREEP TESTER TYPE 

  • No.145-A/No.145-B CREEP TESTER (PULLEY TYPE/ BALANCE TYPE)

  • Standard Method : JIS-K7115, ASTM-D2990, ISO-899-1

  • This tester is used to measure the increasing creep by applying static load to plastic test specimens.

  • By choosing the Chuck, the tester enables to conduct tensile test, condensation test, and bending test.

  • The tester can also be assorted with test functions such as relaxation test, heat shrinkage test, and thermal impulse test.

  • Click Here : CREEP TESTER (PULLEY TYPE/BALANCE TYPE)


CREEP TESTER (PULLEY TYPE/ BALANCE TYPE)
ModelCREEP TESTER (PULLEY TYPE)
Hangings3, 6, or 10 Hangings (3 kinds)
SpecimenSee JIS-K7162 for reference JIS-K7162
Load MethodPulley Wheel Type
Weight LoadMax. 500 N （50 kgf）
Displacement
Measurement		Potentiometer :
Scale 0.1 mm, Stroke 0 to Max. 300 mm
Differential Transformer :
Scale 0.01 mm, Stroke 0 to Max. ± 40 mm
Temperature
Range		Max. 200 °C
SoftwareWindows Compatible
OptionCompression Jig, Bending Jig, Low Temperature Oven,
Constant Temperature & Humidity Oven, Divided Oven,
Liquid Immersion Bath, Gauge Length Measuring Spec,
Weight Traveling System (WTS)
Power SourceDiffer by Specifications.
Dimensions /
Weight (Approx.)		Differ by Specifications.
CREEP TESTER (PULLEY TYPE/ BALANCE TYPE)
ModelCREEP TESTER (BALANCE TYPE)
Hangings3, 6, or 10 Hangings (3 kinds)
SpecimenSee JIS-K7162 for reference JIS-K7162
Load MethodBalance Scale Type
Weight LoadMax. 5 kN （500 kgf）
Displacement
Measurement		Differential Transformer :
Scale 0.01 mm, Stroke 0 to Max. ± 40 mm
Temperature
Range		Max. 200 °C
SoftwareWindows Compatible
OptionCompression Jig, Bending Jig, Low Temperature Oven,Constant Temperature & Humidity Oven, Divided Oven,Liquid Immersion Bath, Gauge Length Measuring Spec,Weight Traveling System (WTS)
Power SourceDiffer by Specifications.
Dimensions /
Weight (Approx.)		Differ by Specifications.

==========================

  • No.145-SV CREEP TESTER (SERVOMOTOR TYPE)

  • Standard Method : JIS-K7115, ASTM-D2990, ISO-899-1(CREEP TEST), JIS-K6263, ISO-3384(STRESS RELAXATION TEST)

  • Adding a servomotor to the usual actual load type creep tester, and detecting the load using a load cell, the servomotor type creep tester can effectively reduce impact when the test specimen breaks, simultaneously saving space.

  • By choosing the Chuck, the tester enables conducting tensile stress relaxation tests and the condensation stress relaxation test.

  • The tester can also be assorted with test functions such as thermal contraction testing and thermal impact testing.

  • CLICK HERE : CREEP TESTER (SERVOMOTOR TYPE)



CREEP TESTER (SERVOMOTOR TYPE)
Specification
Hangings3, 6, or 10 Hangings (3 kinds)
SpecimenSee JIS-K7162 or JIS-K6263 for reference
Load MethodServomotor Type
Weight LoadMax. 5 kN (500 kgf)
Load DetectionLoad Cell
Displacement
Measurement		Potentionmeter :
Scale 0.1 mm, Stroke 0 to Max. 300 mm
Differential Transformer :
0.01 mm, Stroke 0 to Max. ± 40 mm
Temperature
Range		Max. 200 °C
SoftwareWindows Compatible
OptionCompression Jig, Bending Jig, Low Temperature Oven, Constant Temperature & Humidity Oven, Divided Oven, Liquid Immersion Bath, Gauge Length Measuring Spec
Power SourceDiffer by Specifications.
Dimensions /
Weight (Approx.)		Differ by Specifications.

==========================

  • HYBRID CREEP TESTER (STRESS RELAXATION TESTER)

  • Standard Method : JIS-K7115, ASTM-D2990, ISO-899-1(CREEP TEST), JIS-K6263, ISO-3384(STRESS RELAXATION TEST)

  • By equipping a load cell to the usual CREEP TESTER, this tester enables to test stress relaxation of vulcanized rubber and thermoplastic rubber.

  • By choosing the Chuck, the tester enables to conduct the tensile stress relaxation test and the condensation stress relaxation test.

  • The tester can also be assorted with test functions such as heat shrinkage test and thermal impulse test.

  • Click Here : HYBRID CREEP TESTER (STRESS RELAXATION TESTER)



HYBRID CREEP TESTER (STRESS RELAXATION TESTER)
Specification
Hangings3, 6 or 10 Hangings, (3 kinds)
SpecimenSee JIS-K6263 for reference
Load MethodPulley Wheel Type or Balance Scale Type
Load MeasuringLoad Cell, Max. 500 N (50 kgf)
Displacement
Measurement		Potentionmeter :
Scale 0.1 mm, Stroke 0 to Max.
Differential Transformer :
Scale 0.01 mm, Stroke 0 to Max. ± 40 mm
Temperature
Range		Max. 200 °C
SoftwareWindows Compatible
OptionCompression Jig, Bending Jig, Low Temperature Oven,
Constant Temperature & Humidity Oven, Divided Oven,
Liquid Immersion Bath, Gauge Length Measuring Spec
Power SourceDiffer by Specifications.
Dimensions / Weight 
(Approx.)		Differ by Specifications.

Jika anda membutuhkan/mencari alat CREEP TESTER TYPE . yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap memjawab segala kebutuhan anda khususnya untuk alat uji Creep Test.

CREEP TESTER TYPE

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :

  • PT. Mora Anugerah Berkat (M.A.B)

  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten

  • Phone : 021 7345.7064 / 7366.0160

  • Mobile : 0812.8140.0749 / 0812.8770.5470 

  • Chat : Whats App, Line, WeChat, Telegram

  • Website : www.moraanugerah.id  -  www.moraanugerah.com

  • Email : info@moraanugerah.com - info@moraanugerah.id - marketing_div@moraanugerah.com
Langganan: Postingan (Atom)