Tawk.to

PT.Mora Anugerah Berkat adalah perusahaan penyedia alat – alat laboratorium, alat laboratorium yang kami sediakan meliputi : general laboratorium equipment,medical equipment (alat kesehatan), environmental (alat uji lingkungan), chemical/reagent consumable,mineral/civil material testing dan kalibrasi.

About Us

No.275 Williams Abrasion Tester | PT. Mora Anugerah Berkat

                


No.275 Williams Abrasion Tester | 
PT. Mora Anugerah Berkat 


PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti  : William Abrasion Testing. 

  • No.275 WILLIAMS ABRASION TESTER

  • Standard Method : JIS-K6264-2 # ISO-4649

  • Click Here : William Abrasion Tester

  • This tester is to evaluate the abrasion resistance of vulcanized rubber and thermo-plastic rubber. The operator is to determine the volume loss due to the abrasive action of rubbing two flat and non rotating test specimens to an abrading wheel. This tester is usually used on test specimens that are applied for tires and shoe soles.

No.275 Williams Abrasion Tester | 

PT. Mora Anugerah Berkat  

YASUDA SEIKI - No.275 Williams Abrasion Tester
Specimen(20 ± 0.5) × (20 ± 0.5) × T10 mm
Specimen
Position		Left-Right 63.5 mm from center of wheel
Weight Load35.5 N（3.62 kgf）
Abrasion
Wheel		Outer Diameter φ165 mm,
Inner Diameter φ70 mm,
Material C, Grit #70
Wheel Rotation
Speed		37 ± 3 rpm
Air NozzleVent φ1.0 mm (Pitch 6 mm) :
Upper & Lower 3 pcs each,
Air Pressure 180 kPa
Pressure GaugeMax. 1 MPa (Scale 0.1 MPa)
TimerMax. 99 min 59 sec
AccessorySpecimen Cutter
Power SourceAC 100 V, 1-Phase, 10 A, 50/60 Hz
Air Source0.5 MPa or More
Dimensions /
Weight (Approx.)		W700 × D520 × H560 mm/ 55 kg


Berikut adalah link / tautan produk catalog yang kami miliki seperti dibawah ini :  

  1. Click Here : Yasuda Seiki : Plastic, Rubber, Tape & Polymer Catalog

  2. Click Here : Yasuda Seiki : Electric Wire and Cable Catalog

  3. Click Here : Yasuda Seiki : Leather, Vinyl Leather Cloth Catalog

  4. Click Here : Yasuda Seiki : Paper,Pulp Catalog

  5. Click Here : Drick Instrument : Industrial Testing Instrument Catalog 

  6. Click Here : Cell Instrument : Plastic, Rubber, Tape & Polymer Catalog

  7. Click Here : Testex Instrument Fabric,Garment & Textile Catalog


Jika anda membutuhkan/mencari alat No.275 Williams Abrasion Tester | PT. Mora Anugerah Berkat . yang banyak di gunakan untuk pengujian material plastik,film,tape dan polymer ; jangan ragu untuk menghubungi kami,marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk alat uji William Abrasion Test.

No.275 Williams Abrasion Tester | 
PT. Mora Anugerah Berkat 

  • PT. Mora Anugerah Berkat (M.A.B)

  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten

  • Phone : 021 7345.7064 

  • Mobile : 0812.8140.0749 / 0812.8770.5470

  • Chat : Whats App, Line, WeChat, Telegram

  • Website :  www.moraanugerah.id -                                                 www.moraanugerah.com

  • Email : info@moraanugerah.com -                                              marketing@moraanugerah.com -                                  marketing_div@moraanugerah.com

No.275 Williams Abrasion Tester

                


No.275 Williams Abrasion Tester

PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti  : William Abrasion Testing. 

  • No.275 WILLIAMS ABRASION TESTER

  • Standard Method : JIS-K6264-2 # ISO-4649

  • Click Here : William Abrasion Tester

  • This tester is to evaluate the abrasion resistance of vulcanized rubber and thermo-plastic rubber. The operator is to determine the volume loss due to the abrasive action of rubbing two flat and non rotating test specimens to an abrading wheel. This tester is usually used on test specimens that are applied for tires and shoe soles.

No.275 Williams Abrasion Tester


YASUDA SEIKI - No.275 Williams Abrasion Tester
Specimen(20 ± 0.5) × (20 ± 0.5) × T10 mm
Specimen
Position		Left-Right 63.5 mm from center of wheel
Weight Load35.5 N（3.62 kgf）
Abrasion
Wheel		Outer Diameter φ165 mm,
Inner Diameter φ70 mm,
Material C, Grit #70
Wheel Rotation
Speed		37 ± 3 rpm
Air NozzleVent φ1.0 mm (Pitch 6 mm) :
Upper & Lower 3 pcs each,
Air Pressure 180 kPa
Pressure GaugeMax. 1 MPa (Scale 0.1 MPa)
TimerMax. 99 min 59 sec
AccessorySpecimen Cutter
Power SourceAC 100 V, 1-Phase, 10 A, 50/60 Hz
Air Source0.5 MPa or More
Dimensions /
Weight (Approx.)		W700 × D520 × H560 mm/ 55 kg


Berikut adalah link / tautan produk catalog yang kami miliki seperti dibawah ini :  

  1. Click Here : Yasuda Seiki : Plastic, Rubber, Tape & Polymer Catalog

  2. Click Here : Yasuda Seiki : Electric Wire and Cable Catalog

  3. Click Here : Yasuda Seiki : Leather, Vinyl Leather Cloth Catalog

  4. Click Here : Yasuda Seiki : Paper,Pulp Catalog

  5. Click Here : Drick Instrument : Industrial Testing Instrument Catalog 

  6. Click Here : Cell Instrument : Plastic, Rubber, Tape & Polymer Catalog

  7. Click Here : Testex Instrument Fabric,Garment & Textile Catalog


Jika anda membutuhkan/mencari alat No.275 Williams Abrasion Tester . yang banyak di gunakan untuk pengujian material plastik,film,tape dan polymer ; jangan ragu untuk menghubungi kami,marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk alat uji William Abrasion Test.

No.275 Williams Abrasion Tester

  • PT. Mora Anugerah Berkat (M.A.B)

  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten

  • Phone : 021 7345.7064 

  • Mobile : 0812.8140.0749 / 0812.8770.5470

  • Chat : Whats App, Line, WeChat, Telegram

  • Website :  www.moraanugerah.id -                                                 www.moraanugerah.com

  • Email : info@moraanugerah.com -                                              marketing@moraanugerah.com -                                  marketing_div@moraanugerah.com

No.275 Williams Abrasion Tester [Yasuda Seiki]

  


No.275 Williams Abrasion Tester [Yasuda Seiki]


PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti  : William Abrasion Testing. 

  • No.275 WILLIAMS ABRASION TESTER

  • Standard Method : JIS-K6264-2 # ISO-4649

  • Click Here : William Abrasion Tester

  • This tester is to evaluate the abrasion resistance of vulcanized rubber and thermo-plastic rubber. The operator is to determine the volume loss due to the abrasive action of rubbing two flat and non rotating test specimens to an abrading wheel. This tester is usually used on test specimens that are applied for tires and shoe soles.

No.275 Williams Abrasion Tester [Yasuda Seiki]

YASUDA SEIKI - No.275 Williams Abrasion Tester
Specimen(20 ± 0.5) × (20 ± 0.5) × T10 mm
Specimen
Position		Left-Right 63.5 mm from center of wheel
Weight Load35.5 N（3.62 kgf）
Abrasion
Wheel		Outer Diameter φ165 mm,
Inner Diameter φ70 mm,
Material C, Grit #70
Wheel Rotation
Speed		37 ± 3 rpm
Air NozzleVent φ1.0 mm (Pitch 6 mm) :
Upper & Lower 3 pcs each,
Air Pressure 180 kPa
Pressure GaugeMax. 1 MPa (Scale 0.1 MPa)
TimerMax. 99 min 59 sec
AccessorySpecimen Cutter
Power SourceAC 100 V, 1-Phase, 10 A, 50/60 Hz
Air Source0.5 MPa or More
Dimensions /
Weight (Approx.)		W700 × D520 × H560 mm/ 55 kg


Berikut adalah link / tautan produk catalog yang kami miliki seperti dibawah ini :  

  1. Click Here : Yasuda Seiki : Plastic, Rubber, Tape & Polymer Catalog

  2. Click Here : Yasuda Seiki : Electric Wire and Cable Catalog

  3. Click Here : Yasuda Seiki : Leather, Vinyl Leather Cloth Catalog

  4. Click Here : Yasuda Seiki : Paper,Pulp Catalog

  5. Click Here : Drick Instrument : Industrial Testing Instrument Catalog 

  6. Click Here : Cell Instrument : Plastic, Rubber, Tape & Polymer Catalog

  7. Click Here : Testex Instrument Fabric,Garment & Textile Catalog


Jika anda membutuhkan/mencari alat William Abrasion Tester. yang banyak di gunakan untuk pengujian material plastik,film,tape dan polymer ; jangan ragu untuk menghubungi kami,marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk alat uji William Abrasion Test.

No.275 Williams Abrasion Tester 

[Yasuda Seiki]

  • PT. Mora Anugerah Berkat (M.A.B)

  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten

  • Phone : 021 7345.7064 / 7366.0160

  • Mobile : 0812.8140.0749 / 0812.8770.5470

  • Chat : Whats App, Line, WeChat, Telegram

  • Website :  www.moraanugerah.id -                                                    www.moraanugerah.com

  • Email : info@moraanugerah.com -                                              info@moraanugerah.id -                                                  marketing_div@moraanugerah.com

YASUDA SEIKI [No.275] Williams Abrasion Tester

  


YASUDA SEIKI [No.275] Williams Abrasion Tester


PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti  : William Abrasion Testing. 

  • No.275 WILLIAMS ABRASION TESTER

  • Standard Method : JIS-K6264-2 # ISO-4649

  • Click Here : William Abrasion Tester

  • This tester is to evaluate the abrasion resistance of vulcanized rubber and thermo-plastic rubber. The operator is to determine the volume loss due to the abrasive action of rubbing two flat and non rotating test specimens to an abrading wheel. This tester is usually used on test specimens that are applied for tires and shoe soles.

YASUDA SEIKI [No.275] Williams Abrasion Tester

YASUDA SEIKI - No.275 Williams Abrasion Tester
Specimen(20 ± 0.5) × (20 ± 0.5) × T10 mm
Specimen
Position		Left-Right 63.5 mm from center of wheel
Weight Load35.5 N（3.62 kgf）
Abrasion
Wheel		Outer Diameter φ165 mm,
Inner Diameter φ70 mm,
Material C, Grit #70
Wheel Rotation
Speed		37 ± 3 rpm
Air NozzleVent φ1.0 mm (Pitch 6 mm) :
Upper & Lower 3 pcs each,
Air Pressure 180 kPa
Pressure GaugeMax. 1 MPa (Scale 0.1 MPa)
TimerMax. 99 min 59 sec
AccessorySpecimen Cutter
Power SourceAC 100 V, 1-Phase, 10 A, 50/60 Hz
Air Source0.5 MPa or More
Dimensions /
Weight (Approx.)		W700 × D520 × H560 mm/ 55 kg


Berikut adalah link / tautan produk catalog yang kami miliki seperti dibawah ini :  

  1. Click Here : Yasuda Seiki : Plastic, Rubber, Tape & Polymer Catalog

  2. Click Here : Yasuda Seiki : Electric Wire and Cable Catalog

  3. Click Here : Yasuda Seiki : Leather, Vinyl Leather Cloth Catalog

  4. Click Here : Yasuda Seiki : Paper,Pulp Catalog

  5. Click Here : Drick Instrument : Industrial Testing Instrument Catalog 

  6. Click Here : Cell Instrument : Plastic, Rubber, Tape & Polymer Catalog

  7. Click Here : Testex Instrument Fabric,Garment & Textile Catalog


Jika anda membutuhkan/mencari alat William Abrasion Tester. yang banyak di gunakan untuk pengujian material plastik,film,tape dan polymer ; jangan ragu untuk menghubungi kami,marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk alat uji William Abrasion Test.

YASUDA SEIKI [No.275] Williams Abrasion Tester

  • PT. Mora Anugerah Berkat (M.A.B)

  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten

  • Phone : 021 7345.7064 / 7366.0160

  • Mobile : 0812.8140.0749 / 0812.8770.5470

  • Chat : Whats App, Line, WeChat, Telegram

  • Website :  www.moraanugerah.id -                                                    www.moraanugerah.com

  • Email : info@moraanugerah.com -                                              info@moraanugerah.id -                                                  marketing_div@moraanugerah.com

Alat Test HUMBOLDT - Electrical Density Gauge [H-4114SD.3F] di Kota Medan

        


Alat Test HUMBOLDT - Electrical Density Gauge [H-4114SD.3F] di Kota Medan   


The EDGe consists of two independent units, one for use in the lab and one for field use, which work together with the use of a Microsoft app to ensure precise and accurate measurements. The EDGe provides a direct correlation between the Proctor test data of a representative aggregate/soil sample in the lab and readings of the same material in the field. The lab unit provides you with the tools to take readings directly from six-inch Proctor molds, while performing standard or modified Proctor tests. The field unit is lightweight and comes with a ruggedized backpack for easy transport and storage. Both units are nuclear free, which eliminates the need for radiation safety compliance regimens and transportation restrictions. The EDGe is simple to use.


The advantages of using the EDGe are :

  • Complies with AASHTO TP112 and is an enhancement of ASTM D7698 that includes a Laboratory aggregate calibration procedure

  • Nuclear-free device

  • Accurate and repeatable results that correlate to either ASTM D1557 or ASTM D698 standard

  • Proctor tests

  • Does not require highly trained or licensed technicians

  • Does not require special handling for shipping or regulatory compliance for hazardous materials

  • Easy-to-learn and easy-to-use with its step-by-step menu

  • Lightweight and easily transportable

  • Eliminates costs associated with nuclear gauges


Alat Test HUMBOLDT - Electrical Density Gauge [H-4114SD.3F] di Kota Medan  


The laboratory aggregate calibration procedure involves electrical testing of a representative sample of the construction aggregate or soil materials while performing either an ASTM D1557 Standard Test Method for Laboratory Compaction using a Modified Effort of 56,000 ft-lbf/cubic foot or the ASTM D698 Standard Test Method for Laboratory Compaction using a Standard Effort of 12,000 ft-lbf/cubic.

During the laboratory test, the EDGe lab-sensor and a Windows 10 laptop or tablet are used to collect and manage the physical and electrical data during the Proctor test. The software generates a Proctor curve that displays the maximum dry density at the calculated optimum moisture content and is saved and typically printed for client reports. The empirically derived correlations relate the electrical and physical properties of the aggregate or soil that is scheduled for placement and compaction on construction project sites, such as road construction or other shallow foundation. The physical and electrical data from the Proctor test is saved on the laboratory laptop computer. This data can then be transferred to a ruggedized field Windows 10 tablet by USB stick, a cloud service, or via wireless connection for use with the EDGe field equipment for quality assurance / quality control (QA/QC) testing and construction quality certification.

PT. Mora Anugerah Berkat (M.A.B) sudah berpengalaman menyediakan dan mensupply alat-alat laboratorium material testing khususnya untuk construction testing/civil material testing seperti produk Alat Test HUMBOLDT - Electrical Density Gauge [H-4114SD.3F] di Kota Medan   
, kami juga menyediakan berbagai peralatan , aksessoris dan sparepart dari HUMBOLDT, kami juga menyediakan produk selain HUMBOLDT  seperti FORNEY, GILSON, ELE, MATEST juga (Buatan China). kami juga menyediakan spare part dan aksessoris dari brand / merek yang ada serta kami juga menyediakan layanan seperti re-training penggunaan alat, jasa perawatan (Maintenance), Jasa Perbaikan (Service) dan mensupport (membantu) untuk kalibrasi dan lain - lain jangan ragu menghubungi kami.

Alat Test HUMBOLDT - Electrical Density Gauge [H-4114SD.3F] di Kota Medan

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :

Vendor HUMBOLDT [H-4114SD.3F] Electrical Density Gauge di Kota Samarinda

        


Vendor HUMBOLDT [H-4114SD.3F] Electrical Density Gauge di Kota Samarinda   


The EDGe consists of two independent units, one for use in the lab and one for field use, which work together with the use of a Microsoft app to ensure precise and accurate measurements. The EDGe provides a direct correlation between the Proctor test data of a representative aggregate/soil sample in the lab and readings of the same material in the field. The lab unit provides you with the tools to take readings directly from six-inch Proctor molds, while performing standard or modified Proctor tests. The field unit is lightweight and comes with a ruggedized backpack for easy transport and storage. Both units are nuclear free, which eliminates the need for radiation safety compliance regimens and transportation restrictions. The EDGe is simple to use.


The advantages of using the EDGe are :

  • Complies with AASHTO TP112 and is an enhancement of ASTM D7698 that includes a Laboratory aggregate calibration procedure

  • Nuclear-free device

  • Accurate and repeatable results that correlate to either ASTM D1557 or ASTM D698 standard

  • Proctor tests

  • Does not require highly trained or licensed technicians

  • Does not require special handling for shipping or regulatory compliance for hazardous materials

  • Easy-to-learn and easy-to-use with its step-by-step menu

  • Lightweight and easily transportable

  • Eliminates costs associated with nuclear gauges


Vendor HUMBOLDT [H-4114SD.3F] Electrical Density Gauge di Kota Samarinda  


The laboratory aggregate calibration procedure involves electrical testing of a representative sample of the construction aggregate or soil materials while performing either an ASTM D1557 Standard Test Method for Laboratory Compaction using a Modified Effort of 56,000 ft-lbf/cubic foot or the ASTM D698 Standard Test Method for Laboratory Compaction using a Standard Effort of 12,000 ft-lbf/cubic.

During the laboratory test, the EDGe lab-sensor and a Windows 10 laptop or tablet are used to collect and manage the physical and electrical data during the Proctor test. The software generates a Proctor curve that displays the maximum dry density at the calculated optimum moisture content and is saved and typically printed for client reports. The empirically derived correlations relate the electrical and physical properties of the aggregate or soil that is scheduled for placement and compaction on construction project sites, such as road construction or other shallow foundation. The physical and electrical data from the Proctor test is saved on the laboratory laptop computer. This data can then be transferred to a ruggedized field Windows 10 tablet by USB stick, a cloud service, or via wireless connection for use with the EDGe field equipment for quality assurance / quality control (QA/QC) testing and construction quality certification.

PT. Mora Anugerah Berkat (M.A.B) sudah berpengalaman menyediakan dan mensupply alat-alat laboratorium material testing khususnya untuk construction testing/civil material testing seperti produk Vendor HUMBOLDT [H-4114SD.3F] Electrical Density Gauge di Kota Samarinda  
, kami juga menyediakan berbagai peralatan , aksessoris dan sparepart dari HUMBOLDT, kami juga menyediakan produk selain HUMBOLDT  seperti FORNEY, GILSON, ELE, MATEST juga (Buatan China). kami juga menyediakan spare part dan aksessoris dari brand / merek yang ada serta kami juga menyediakan layanan seperti re-training penggunaan alat, jasa perawatan (Maintenance), Jasa Perbaikan (Service) dan mensupport (membantu) untuk kalibrasi dan lain - lain jangan ragu menghubungi kami.

Vendor HUMBOLDT [H-4114SD.3F] Electrical Density Gauge di Kota Samarinda 

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :
Langganan: Postingan (Atom)