According to ASTM CNS 11297 Standard Practice for Capping Cylindrical Concrete Specimens, there are some key factors for using capping materials :

1. ASTM C617 4.1: Capping Plates—Neat cement caps and high-strength gypsum paste caps shall be formed against a glass plate at least 6 mm [1⁄4 in.] thick.
2. ASTM C617 4.2: Suitable alignment devices, such as As: As guide bars or bull's-eye levels, shall be used in conjunction with capping plates to ensure that no single cap will depart from perpendicularity to the axis of a cylindrical specimen by more than 0.5° (approximately equivalent to 3 mm in 300 mm [1 ⁄8 in. in 12 in.]).
3. ASTM C617 5.1: The strength of the capping material and the thickness of the caps shall
4. ASTM C617 5.1.3: The compressive strength of capping materials shall be determined by testing 50 mm [2 in.] cubes following the procedure described in Test Method C109/C109M.
5. According to ASTM C617 5.1.4: The strength Of the capping material shall be determined on receipt of a new lot and at intervals not exceeding three months.
6. Click Here : CAPSTONE Capping Gypsum

Capping Gypsum Around 30 mins, the strength of the gypsum can reach 5,000~9,000 psi (350~630 kgf/cm2). This type of gypsum is mostly used in the capping material for concrete compression test according to ASTM C617 standard, so our high strength Capping Gypsum the offer the convenient and excellent testing material for civil engineering industry.

Jual CAPSTONE Capping Gypsum Murah

Capping Strength Perfomance

Product Capping Gypsum Consist Of :

A. Capping Gypsum S-420

S-420 features the high quality and high strength concrete test capping material. It is designated as the most reliable product by many professional testing labs. The high reputation of S -420 raised the demand. Modern buildings such as high-rise construction request S-420 as the minimum strength as qualification.

The water to gypsum ratio for S-420 is recommended to be 21-22%. After simply mixing with water, the gypsum is ready to use immediately and will be fully solidified after approximately 30 minutes and reach the strength over 420 kgf/cm2, Equals to 6000psi.

With Compressive Strength and Maximum Thickness of Capping Materials.

B. Capping Gypsum S-350

S-350 is the most popular concrete capping products of Capstone Series. S-350 provides the best balance of working ability and strength performance for concrete capping.The water and gypsum ratio for S-350 is recommended to be 23-24%. After simply mixing with water, the gypsum can be used immediately and will fully harden in approximately 30 minutes. with strength reaching over 350 kgf/cm2, equals to 5000psi.

With Compressive Strength and Maximum Thickness of Capping Materials.

C. Capping Gypsum S-280

S-280 is the entry level Concrete capping product of the Capstone Series. It provides the basic compressive strength with the lowest price.

The water-gypsum ratio for S-280 is recommended to be 25-26%. After simply mixing with water, the gypsum can be used immediately and will fully harden inapproximately 30 minutes. With strength reaching over 280 kgf/cm2, equals to 4000psi

With Compressive Strength and Maximum Thickness of Capping Materials

According to the regulations of US ASTM C617 standard, it is allowed to use high strength gypsum in capping cylindrical concrete specimens. Compared with other methods, gypsum capping is the most convenient, efficient, rapid, and safest capping method.

Jual CAPSTONE Capping Gypsum Murah

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 

• PT. Mora Anugerah Berkat (M.A.B)
• Click Here : CAPSTONE Capping Gypsum
• Alamat        : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,
•                     Kota Tangerang - Provinsi Banten 
• Phone : 021 7345.7064 / 7366.0160
• Mobile : 0812.8140.0749 / 0812.8770.5470
• Chat : Whats App,Line,WeChat,Telegram 
• Website : http://moraanugerah.id/ - http://moraanugerah.com/
• Email : info@moraanugerah.com - info@moraanugerah.id -  
•                    marketing_div@moraanugerah.com 

According to ASTM CNS 11297 Standard Practice for Capping Cylindrical Concrete Specimens, there are some key factors for using capping materials :

1. ASTM C617 4.1: Capping Plates—Neat cement caps and high-strength gypsum paste caps shall be formed against a glass plate at least 6 mm [1⁄4 in.] thick.
2. ASTM C617 4.2: Suitable alignment devices, such as As: As guide bars or bull's-eye levels, shall be used in conjunction with capping plates to ensure that no single cap will depart from perpendicularity to the axis of a cylindrical specimen by more than 0.5° (approximately equivalent to 3 mm in 300 mm [1 ⁄8 in. in 12 in.]).
3. ASTM C617 5.1: The strength of the capping material and the thickness of the caps shall
4. ASTM C617 5.1.3: The compressive strength of capping materials shall be determined by testing 50 mm [2 in.] cubes following the procedure described in Test Method C109/C109M.
5. According to ASTM C617 5.1.4: The strength Of the capping material shall be determined on receipt of a new lot and at intervals not exceeding three months.
6. Click Here : CAPSTONE Capping Gypsum

Capping Gypsum Around 30 mins, the strength of the gypsum can reach 5,000~9,000 psi (350~630 kgf/cm2). This type of gypsum is mostly used in the capping material for concrete compression test according to ASTM C617 standard, so our high strength Capping Gypsum the offer the convenient and excellent testing material for civil engineering industry.

Jual Murah CAPSTONE Capping Gypsum

Capping Strength Perfomance

Product Capping Gypsum Consist Of :

A. Capping Gypsum S-420

S-420 features the high quality and high strength concrete test capping material. It is designated as the most reliable product by many professional testing labs. The high reputation of S -420 raised the demand. Modern buildings such as high-rise construction request S-420 as the minimum strength as qualification.

The water to gypsum ratio for S-420 is recommended to be 21-22%. After simply mixing with water, the gypsum is ready to use immediately and will be fully solidified after approximately 30 minutes and reach the strength over 420 kgf/cm2, Equals to 6000psi.

With Compressive Strength and Maximum Thickness of Capping Materials.

B. Capping Gypsum S-350

S-350 is the most popular concrete capping products of Capstone Series. S-350 provides the best balance of working ability and strength performance for concrete capping.The water and gypsum ratio for S-350 is recommended to be 23-24%. After simply mixing with water, the gypsum can be used immediately and will fully harden in approximately 30 minutes. with strength reaching over 350 kgf/cm2, equals to 5000psi.

With Compressive Strength and Maximum Thickness of Capping Materials.

C. Capping Gypsum S-280

S-280 is the entry level Concrete capping product of the Capstone Series. It provides the basic compressive strength with the lowest price.

The water-gypsum ratio for S-280 is recommended to be 25-26%. After simply mixing with water, the gypsum can be used immediately and will fully harden inapproximately 30 minutes. With strength reaching over 280 kgf/cm2, equals to 4000psi

With Compressive Strength and Maximum Thickness of Capping Materials

According to the regulations of US ASTM C617 standard, it is allowed to use high strength gypsum in capping cylindrical concrete specimens. Compared with other methods, gypsum capping is the most convenient, efficient, rapid, and safest capping method.

Jual Murah CAPSTONE Capping Gypsum

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 

• PT. Mora Anugerah Berkat (M.A.B)
• Click Here : CAPSTONE Capping Gypsum
• Alamat        : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,
•                     Kota Tangerang - Provinsi Banten 
• Phone : 021 7345.7064 / 7366.0160
• Mobile : 0812.8140.0749 / 0812.8770.5470
• Chat : Whats App,Line,WeChat,Telegram 
• Website : http://moraanugerah.id/ - http://moraanugerah.com/
• Email : info@moraanugerah.com - info@moraanugerah.id -  
•                    marketing_div@moraanugerah.com 

Sand Cone Set (T-061) – Alfa Test

Used to determine the in-situ density of the fine grain compacted soil. The test consists of making a hole in the compacted soil layer, filling it with known-density soil sample from the container (plastic jar/sand pouring cylinder), then measuring the soil weight along with the water content.

Contains a sand cone and a base plate that has an opening designed for the cone to sit into. The set also contains a container (plastic jar/sand pouring cylinder) to be used during the test.

Gilson Sand Cone Density Apparatus

Sand Cone Density Apparatus (6.5in)

The sand cone density test is an accepted and inexpensive method of determining in-place density of soils. Effective in soils with particle sizes up to 2in (51mm), using test hole volumes of approximately 0.1ft3 (2.8L).

HM-100 Sand Cone Density Apparatus (6-1/2in) is a 1gal (3.8L) threaded plastic jar with detachable metal double cone fitting. The cone is threaded on one end, flanged to 6-1/2in (165mm) on the other, with a cylindrical valve of 1/2in (12.7mm) Dia. orifice between ends. Valve has stops to prevent rotating past completely open or closed positions. HM-102 Plastic Jar for Sand Cone Density Test is available as a replacement.

Features :

• Detachable cone fitting
• 1gal capacity
• Valve Stop prevents rotating past open or closed position

Included Items :

•     Sand Cone Density Apparatus

Accessories :

• HMA-8 In-Place Density Accessory Kit with components needed for density testing

• HM-102 Plastic Jar Only for Sand Cone Density Test as replacement product

• HM-104 12x12in Density Plate Only for Sand Cone Test fits cone of plastic jar for filling test hole with Density Sand

• HM-106 Sand Cone Density Test Sand for testing soil for density