Tawk.to

PT.Mora Anugerah Berkat adalah perusahaan penyedia alat – alat laboratorium, alat laboratorium yang kami sediakan meliputi : general laboratorium equipment,medical equipment (alat kesehatan), environmental (alat uji lingkungan), chemical/reagent consumable,mineral/civil material testing dan kalibrasi.

About Us

Agen Alat Total Station Sokkia/Topcon/Leica/Nikon/Ruide/South Di Bali/Denpasar/Buleleng/Gianyar/Karang Asem/Jembrana/Tabanan


Kami Menyediakan Alat - alat Supplier Alat Total Station Sokkia/ Topcon/ Leica/ Nikon/ Ruide/ South Di Bali/ Denpasar/ Buleleng/ Gianyar/ Karang Asem/ Jembrana/ Tabanan  terlengkap dengan berbagai merek yang di jual di indonesia,alat-alat survey yang kami tawarkan auto level, theodolite, total station, gps, laser distance dan gps geodetik.

Supplier Alat Total Station Sokkia/Topcon/Leica/Nikon/Ruide/South Di Bali/Denpasar/Buleleng/Gianyar/Karang Asem/Jembrana/Tabanan

ModelDT-205DT-207DT-209
Angle
Measurement
Accuracy5"7"9"
MethodAbsolute
Reading		Absolute
Reading		Absolute
Reading
Detecing
Horizontal :
2 Sides		Horizontal :
2 Sides		Horizontal :
1 Sides
Vertical :
1 Side		Vertical :
1 Side		Vertical :
1 Side
Min Reading
1"/5"5"/10"10"/20"
0.5 mgon /
1 mgon		1 mgon /
2 mgon		2 mgon /
5 mgon
Diameter Circle71mm (2.75")71mm (2.75")71mm (2.75")
Telescope
Magnification30x30x26x
Length149 mm (5.8")149 mm (5.8")149 mm (5.8")
Objective Lens45 mm (1.7")45 mm (1.7")40 mm (1.7")
Field Of View1°30'1°30'1°30'
Resolving
Power		2.5"2.5"2.5"
Minimum
Focus		0.9m (2.9')0.9m (2.9')0.9m (2.9')
Stadia Ratio100100100
Stadia
Constant		000
Sighting
Collimator		DoubleDoubleDouble
Laser Pointer
MethodN/AN/AN/A
Weve Length /
Power		N/AN/AN/A
Laser ClassN/AN/AN/A
Display
Unit
2 Sides2 Sides1 Sides
LCD
7 Segment		LCD
7 Segment		LCD
7 Segment
Data OutputSerial Signal
Connector		RS-232CN/AN/A
Illumination
DisplayYesYesYes
ReticleYesYesN/A
Compensator
Tilt SensorVerticalN/AN/A
Compensating
Range		±3'N/AN/A
Optical
Plummet
Magnification3x3x3x
Field Of View3°3°3°
Focusing0.5 m~∞0.5 m~∞0.5 m~∞
Level
Sensitivity
Plate Level40"/2mm40"/2mm60"/2mm
Circular Level10'/2mm10'/2mm10'/2mm
Water
Protection		StandardIP66IP66IP66
Power SupplyBattery4 AA Batteries4 AA Batteries4 AA Batteries
Operating
Time
Theodolite Only140h150h170h
Laser OnlyN/AN/AN/A
Theodolite and
Laser		N/AN/AN/A
Operating
Temp
- 68°F ± 122°F- 68°F ± 122°F- 68°F ± 122°F
(-20 °C ± 50°C)(-20 °C ± 50°C)(-20 °C ± 50°C)
Weight9 Lbs (4,1Kg)9 Lbs (4,1Kg)7.5 Lbs (3.4Kg)

Berikut ini adalah brosur total station yang kami tawarkan sebagai berikut : 

ModelDT-205LDT-207LDT-209L
Angle
Measurement
Accuracy5"7"9"
MethodAbsolute
Reading		Absolute
Reading		Absolute
Reading
Detecing
Horizontal :
2 Sides		Horizontal :
2 Sides		Horizontal :
1 Sides
Vertical :
1 Side		Vertical :
1 Side		Vertical :
1 Side
Min Reading
1"/5"5"/10"10"/20"
0.5 mgon/1 mgon1 mgon/2 mgon2 mgon/5 mgon
Diameter Circle71mm (2.75")71mm (2.75")71mm (2.75")
Telescope
Magnification30x30x26x
Length149 mm (5.8")149 mm (5.8")149 mm (5.8")
Objective Lens45 mm (1.7")45 mm (1.7")40 mm (1.7")
Field Of View1°30'1°30'1°30'
Resolving
Power		2.5"2.5"2.5"
Minimum
Focus		0.9m (2.9')0.9m (2.9')0.9m (2.9')
Stadia Ratio100100100
Stadia
Constant		000
Sighting
Collimator		DoubleDoubleDouble
Laser Pointer
MethodFocusingFocusingFocusing
Weve Length /
Power		633nm/0.6mW633nm/0.6mW633nm/0.6mW
Laser ClassClass IIClass IIClass II
Display
Unit
2 Sides2 Sides1 Sides
LCD
7 Segment		LCD
7 Segment		LCD
7 Segment
Data OutputSerial Signal
Connector		RS-232CN/AN/A
Illumination
DisplayYesYesYes
ReticleYesYesN/A
Compensator
Tilt SensorVerticalN/AN/A
Compensating
Range		±3'N/AN/A
Optical
Plummet
Magnification3x3x3x
Field Of View3°3°3°
Focusing0.5 m~∞0.5 m~∞0.5 m~∞
Level
Sensitivity
Plate Level40"/2mm40"/2mm60"/2mm
Circular Level10'/2mm10'/2mm10'/2mm
Water
Protection		StandardIP66IP66IP66
Power SupplyBattery4 AA Batteries4 AA Batteries4 AA Batteries
Operating
Time
Theodolite Only140h150h170h
Laser Only80h80h80h
Theodolite and
Laser		45h45h45h
Operating
Temp
- 68°F ± 122°F- 68°F ± 122°F- 68°F ± 122°F
(-20 °C ± 50°C)(-20 °C ± 50°C)(-20 °C ± 50°C)
Weight9.25 Lbs (4,2Kg)9.25 Lbs (4,2Kg)8 Lbs (3.6Kg)

Supplier Alat Total Station Sokkia/Topcon/Leica/Nikon/Ruide/South Di Bali/Denpasar/Buleleng/Gianyar/Karang Asem/Jembrana/Tabanan

terlengkap dengan berbagai merek yang di jual di indonesia,alat-alat survey yang kami tawarkan auto level,theodolite,total station,gps,laser distante dan gps geodetik Total Station


Topcon Total Station  :
iX-1000 series,GT 1000 Series,IS301,IS303,IS305,MS05AX,MS1AX,DS-101AC,DS-102AC,DS-103AC,DS-105AC,GM-101,GM-102,GM-103,GM-105,ES-60,MS05AXII,MS1AXII,PS-101A,PS-102A,PS103A,PS-105A,PS-101AC,PS-102AC,PS-103AS,PS-105AC

Total Station Sokkia :
FX Advanced Total Station,DX Auto-Pointing Total Station,CX-105 5 Reflectorless Total station,CX-103,CX-107,CX101,CX102,SET-60 Series,Sokkia DX 200 Series,GYRO X II Automated,NET AX,DT-40 Series,FX-101,FX 105,iM-52,iM 55,CX 65,CX-62C,CX-102,iM-101,iM-102,iM-105,DX 205AC,DX-201AC,DX 200,DX-102AC,DX-103,DX-101AC,iX-505,iX-505,iX-1000,iX-500

Total Station Nikon :
Nivo 1.C,NIVO 2 M,NIVO 3.M,NIVO 5M,Nivo 5C,NIVO 3.C, Nivo 2.C,XF 5",XF 3", XF 1, XS 2",XS 3,XS 1",XS 5",NPL-322,DTM-322,NE-100 Series,DTM-652,DTM/NPL-522

Total Station Leica :
FlexLine TS10,FlexLine TS07,FlexLine TS03,Nova MS60

Total Station Ruide :
R2 Series,RIS Series,RCS

Total Station South :
A1,NTS-340R6A,N3 Series,N4 Series,N6 Series,N7/N9 Series,N8/N80

Berikut ini adalah brosur total station yang kami tawarkan sebagai berikut : 
Supplier Alat Total Station Sokkia/ Topcon/ Leica/ Nikon/ Ruide/ South Di Bali/Denpasar/Buleleng/Gianyar/Karang Asem/Jembrana/Tabanan

Jika anda membutuhkan Total Station atau Theodolite Silahkan hubungi kami di

Jual CAPSTONE Capping Gypsum di Kelapa Gading

   

       


Jual CAPSTONE Capping Gypsum di Kelapa Gading 


According to ASTM CNS 11297 Standard Practice for Capping Cylindrical Concrete Specimens, there are some key factors for using capping materials :

  1. ASTM C617 4.1: Capping Plates—Neat cement caps and high-strength gypsum paste caps shall be formed against a glass plate at least 6 mm [1⁄4 in.] thick.
  2. ASTM C617 4.2: Suitable alignment devices, such as As: As guide bars or bull's-eye levels, shall be used in conjunction with capping plates to ensure that no single cap will depart from perpendicularity to the axis of a cylindrical specimen by more than 0.5° (approximately equivalent to 3 mm in 300 mm [1 ⁄8 in. in 12 in.]).
  3. ASTM C617 5.1: The strength of the capping material and the thickness of the caps shall
  4. ASTM C617 5.1.3: The compressive strength of capping materials shall be determined by testing 50 mm [2 in.] cubes following the procedure described in Test Method C109/C109M.
  5. According to ASTM C617 5.1.4: The strength Of the capping material shall be determined on receipt of a new lot and at intervals not exceeding three months.
  6. Click Here : CAPSTONE Capping Gypsum


Capping Gypsum Around 30 mins, the strength of the gypsum can reach 5,000~9,000 psi (350~630 kgf/cm2). This type of gypsum is mostly used in the capping material for concrete compression test according to ASTM C617 standard, so our high strength Capping Gypsum the offer the convenient and excellent testing material for civil engineering industry.


Jual CAPSTONE Capping Gypsum di Kelapa Gading 


Capping Strength Perfomance

Product Capping Gypsum Consist Of :

A. Capping Gypsum S-420

S-420 features the high quality and high strength concrete test capping material. It is designated as the most reliable product by many professional testing labs. The high reputation of S -420 raised the demand. Modern buildings such as high-rise construction request S-420 as the minimum strength as qualification.

The water to gypsum ratio for S-420 is recommended to be 21-22%. After simply mixing with water, the gypsum is ready to use immediately and will be fully solidified after approximately 30 minutes and reach the strength over 420 kgf/cm2, Equals to 6000psi.


With Compressive Strength and Maximum Thickness of Capping Materials.

B. Capping Gypsum S-350

S-350 is the most popular concrete capping products of Capstone Series. S-350 provides the best balance of working ability and strength performance for concrete capping.The water and gypsum ratio for S-350 is recommended to be 23-24%. After simply mixing with water, the gypsum can be used immediately and will fully harden in approximately 30 minutes. with strength reaching over 350 kgf/cm2, equals to 5000psi.


With Compressive Strength and Maximum Thickness of Capping Materials.

C. Capping Gypsum S-280

S-280 is the entry level Concrete capping product of the Capstone Series. It provides the basic compressive strength with the lowest price.

The water-gypsum ratio for S-280 is recommended to be 25-26%. After simply mixing with water, the gypsum can be used immediately and will fully harden inapproximately 30 minutes. With strength reaching over 280 kgf/cm2, equals to 4000psi

With Compressive Strength and Maximum Thickness of Capping Materials

According to the regulations of US ASTM C617 standard, it is allowed to use high strength gypsum in capping cylindrical concrete specimens. Compared with other methods, gypsum capping is the most convenient, efficient, rapid, and safest capping method.


Jual CAPSTONE Capping Gypsum di Kelapa Gading


Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 

 

Jual CAPSTONE Capping Gypsum Terlengkap di Jakarta Barat

   

       


Jual CAPSTONE Capping Gypsum Terlengkap di Jakarta Barat


According to ASTM CNS 11297 Standard Practice for Capping Cylindrical Concrete Specimens, there are some key factors for using capping materials :

  1. ASTM C617 4.1: Capping Plates—Neat cement caps and high-strength gypsum paste caps shall be formed against a glass plate at least 6 mm [1⁄4 in.] thick.
  2. ASTM C617 4.2: Suitable alignment devices, such as As: As guide bars or bull's-eye levels, shall be used in conjunction with capping plates to ensure that no single cap will depart from perpendicularity to the axis of a cylindrical specimen by more than 0.5° (approximately equivalent to 3 mm in 300 mm [1 ⁄8 in. in 12 in.]).
  3. ASTM C617 5.1: The strength of the capping material and the thickness of the caps shall
  4. ASTM C617 5.1.3: The compressive strength of capping materials shall be determined by testing 50 mm [2 in.] cubes following the procedure described in Test Method C109/C109M.
  5. According to ASTM C617 5.1.4: The strength Of the capping material shall be determined on receipt of a new lot and at intervals not exceeding three months.
  6. Click Here : CAPSTONE Capping Gypsum


Capping Gypsum Around 30 mins, the strength of the gypsum can reach 5,000~9,000 psi (350~630 kgf/cm2). This type of gypsum is mostly used in the capping material for concrete compression test according to ASTM C617 standard, so our high strength Capping Gypsum the offer the convenient and excellent testing material for civil engineering industry.


Jual CAPSTONE Capping Gypsum Terlengkap di Jakarta Barat


Capping Strength Perfomance

Product Capping Gypsum Consist Of :

A. Capping Gypsum S-420

S-420 features the high quality and high strength concrete test capping material. It is designated as the most reliable product by many professional testing labs. The high reputation of S -420 raised the demand. Modern buildings such as high-rise construction request S-420 as the minimum strength as qualification.

The water to gypsum ratio for S-420 is recommended to be 21-22%. After simply mixing with water, the gypsum is ready to use immediately and will be fully solidified after approximately 30 minutes and reach the strength over 420 kgf/cm2, Equals to 6000psi.


With Compressive Strength and Maximum Thickness of Capping Materials.

B. Capping Gypsum S-350

S-350 is the most popular concrete capping products of Capstone Series. S-350 provides the best balance of working ability and strength performance for concrete capping.The water and gypsum ratio for S-350 is recommended to be 23-24%. After simply mixing with water, the gypsum can be used immediately and will fully harden in approximately 30 minutes. with strength reaching over 350 kgf/cm2, equals to 5000psi.


With Compressive Strength and Maximum Thickness of Capping Materials.

C. Capping Gypsum S-280

S-280 is the entry level Concrete capping product of the Capstone Series. It provides the basic compressive strength with the lowest price.

The water-gypsum ratio for S-280 is recommended to be 25-26%. After simply mixing with water, the gypsum can be used immediately and will fully harden inapproximately 30 minutes. With strength reaching over 280 kgf/cm2, equals to 4000psi

With Compressive Strength and Maximum Thickness of Capping Materials

According to the regulations of US ASTM C617 standard, it is allowed to use high strength gypsum in capping cylindrical concrete specimens. Compared with other methods, gypsum capping is the most convenient, efficient, rapid, and safest capping method.


Jual CAPSTONE Capping Gypsum Terlengkap di Jakarta Barat


Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 

 

Jual Capping Gypsum CAPSTONE di Pantai Indah Kapuk

   

       


Jual Capping Gypsum CAPSTONE di Pantai Indah Kapuk

According to ASTM CNS 11297 Standard Practice for Capping Cylindrical Concrete Specimens, there are some key factors for using capping materials :

  1. ASTM C617 4.1: Capping Plates—Neat cement caps and high-strength gypsum paste caps shall be formed against a glass plate at least 6 mm [1⁄4 in.] thick.
  2. ASTM C617 4.2: Suitable alignment devices, such as As: As guide bars or bull's-eye levels, shall be used in conjunction with capping plates to ensure that no single cap will depart from perpendicularity to the axis of a cylindrical specimen by more than 0.5° (approximately equivalent to 3 mm in 300 mm [1 ⁄8 in. in 12 in.]).
  3. ASTM C617 5.1: The strength of the capping material and the thickness of the caps shall
  4. ASTM C617 5.1.3: The compressive strength of capping materials shall be determined by testing 50 mm [2 in.] cubes following the procedure described in Test Method C109/C109M.
  5. According to ASTM C617 5.1.4: The strength Of the capping material shall be determined on receipt of a new lot and at intervals not exceeding three months.
  6. Click Here : CAPSTONE Capping Gypsum


Capping Gypsum Around 30 mins, the strength of the gypsum can reach 5,000~9,000 psi (350~630 kgf/cm2). This type of gypsum is mostly used in the capping material for concrete compression test according to ASTM C617 standard, so our high strength Capping Gypsum the offer the convenient and excellent testing material for civil engineering industry.

Jual Capping Gypsum CAPSTONE di Pantai Indah Kapuk

Capping Strength Perfomance

Product Capping Gypsum Consist Of :

A. Capping Gypsum S-420

S-420 features the high quality and high strength concrete test capping material. It is designated as the most reliable product by many professional testing labs. The high reputation of S -420 raised the demand. Modern buildings such as high-rise construction request S-420 as the minimum strength as qualification.

The water to gypsum ratio for S-420 is recommended to be 21-22%. After simply mixing with water, the gypsum is ready to use immediately and will be fully solidified after approximately 30 minutes and reach the strength over 420 kgf/cm2, Equals to 6000psi.

With Compressive Strength and Maximum Thickness of Capping Materials.

B. Capping Gypsum S-350

S-350 is the most popular concrete capping products of Capstone Series. S-350 provides the best balance of working ability and strength performance for concrete capping.The water and gypsum ratio for S-350 is recommended to be 23-24%. After simply mixing with water, the gypsum can be used immediately and will fully harden in approximately 30 minutes. with strength reaching over 350 kgf/cm2, equals to 5000psi.

With Compressive Strength and Maximum Thickness of Capping Materials.

C. Capping Gypsum S-280

S-280 is the entry level Concrete capping product of the Capstone Series. It provides the basic compressive strength with the lowest price.

The water-gypsum ratio for S-280 is recommended to be 25-26%. After simply mixing with water, the gypsum can be used immediately and will fully harden inapproximately 30 minutes. With strength reaching over 280 kgf/cm2, equals to 4000psi

With Compressive Strength and Maximum Thickness of Capping Materials

According to the regulations of US ASTM C617 standard, it is allowed to use high strength gypsum in capping cylindrical concrete specimens. Compared with other methods, gypsum capping is the most convenient, efficient, rapid, and safest capping method.

Jual Capping Gypsum CAPSTONE di Pantai Indah Kapuk

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 

  • PT. Mora Anugerah Berkat (M.A.B)
  • Click Here : CAPSTONE Capping Gypsum
  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten 
  • Phone : 021 7345.7064
  • Mobile : 0812.8140.0749 / 0812.8770.5470
  • Chat : Whats App,Line,WeChat,Telegram 
  • Website : www.moraanugerah.id -
  •                                     www.moraanugerah.com
  • Email : info@moraanugerah.com -
  •                           info@moraanugerah.id -  
  •                   marketing_div@moraanugerah.com 

 
Langganan: Postingan (Atom)