Tawk.to

PT.Mora Anugerah Berkat adalah perusahaan penyedia alat – alat laboratorium, alat laboratorium yang kami sediakan meliputi : general laboratorium equipment,medical equipment (alat kesehatan), environmental (alat uji lingkungan), chemical/reagent consumable,mineral/civil material testing dan kalibrasi.

About Us

Jual CAPSTONE Capping Gypsum Terlengkap di Jakarta Barat

   

       


Jual CAPSTONE Capping Gypsum Terlengkap di Jakarta Barat


According to ASTM CNS 11297 Standard Practice for Capping Cylindrical Concrete Specimens, there are some key factors for using capping materials :

  1. ASTM C617 4.1: Capping Plates—Neat cement caps and high-strength gypsum paste caps shall be formed against a glass plate at least 6 mm [1⁄4 in.] thick.
  2. ASTM C617 4.2: Suitable alignment devices, such as As: As guide bars or bull's-eye levels, shall be used in conjunction with capping plates to ensure that no single cap will depart from perpendicularity to the axis of a cylindrical specimen by more than 0.5° (approximately equivalent to 3 mm in 300 mm [1 ⁄8 in. in 12 in.]).
  3. ASTM C617 5.1: The strength of the capping material and the thickness of the caps shall
  4. ASTM C617 5.1.3: The compressive strength of capping materials shall be determined by testing 50 mm [2 in.] cubes following the procedure described in Test Method C109/C109M.
  5. According to ASTM C617 5.1.4: The strength Of the capping material shall be determined on receipt of a new lot and at intervals not exceeding three months.
  6. Click Here : CAPSTONE Capping Gypsum


Capping Gypsum Around 30 mins, the strength of the gypsum can reach 5,000~9,000 psi (350~630 kgf/cm2). This type of gypsum is mostly used in the capping material for concrete compression test according to ASTM C617 standard, so our high strength Capping Gypsum the offer the convenient and excellent testing material for civil engineering industry.


Jual CAPSTONE Capping Gypsum Terlengkap di Jakarta Barat


Capping Strength Perfomance

Product Capping Gypsum Consist Of :

A. Capping Gypsum S-420

S-420 features the high quality and high strength concrete test capping material. It is designated as the most reliable product by many professional testing labs. The high reputation of S -420 raised the demand. Modern buildings such as high-rise construction request S-420 as the minimum strength as qualification.

The water to gypsum ratio for S-420 is recommended to be 21-22%. After simply mixing with water, the gypsum is ready to use immediately and will be fully solidified after approximately 30 minutes and reach the strength over 420 kgf/cm2, Equals to 6000psi.


With Compressive Strength and Maximum Thickness of Capping Materials.

B. Capping Gypsum S-350

S-350 is the most popular concrete capping products of Capstone Series. S-350 provides the best balance of working ability and strength performance for concrete capping.The water and gypsum ratio for S-350 is recommended to be 23-24%. After simply mixing with water, the gypsum can be used immediately and will fully harden in approximately 30 minutes. with strength reaching over 350 kgf/cm2, equals to 5000psi.


With Compressive Strength and Maximum Thickness of Capping Materials.

C. Capping Gypsum S-280

S-280 is the entry level Concrete capping product of the Capstone Series. It provides the basic compressive strength with the lowest price.

The water-gypsum ratio for S-280 is recommended to be 25-26%. After simply mixing with water, the gypsum can be used immediately and will fully harden inapproximately 30 minutes. With strength reaching over 280 kgf/cm2, equals to 4000psi

With Compressive Strength and Maximum Thickness of Capping Materials

According to the regulations of US ASTM C617 standard, it is allowed to use high strength gypsum in capping cylindrical concrete specimens. Compared with other methods, gypsum capping is the most convenient, efficient, rapid, and safest capping method.


Jual CAPSTONE Capping Gypsum Terlengkap di Jakarta Barat


Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 

 

Jual Capping Gypsum CAPSTONE di Pantai Indah Kapuk

   

       


Jual Capping Gypsum CAPSTONE di Pantai Indah Kapuk

According to ASTM CNS 11297 Standard Practice for Capping Cylindrical Concrete Specimens, there are some key factors for using capping materials :

  1. ASTM C617 4.1: Capping Plates—Neat cement caps and high-strength gypsum paste caps shall be formed against a glass plate at least 6 mm [1⁄4 in.] thick.
  2. ASTM C617 4.2: Suitable alignment devices, such as As: As guide bars or bull's-eye levels, shall be used in conjunction with capping plates to ensure that no single cap will depart from perpendicularity to the axis of a cylindrical specimen by more than 0.5° (approximately equivalent to 3 mm in 300 mm [1 ⁄8 in. in 12 in.]).
  3. ASTM C617 5.1: The strength of the capping material and the thickness of the caps shall
  4. ASTM C617 5.1.3: The compressive strength of capping materials shall be determined by testing 50 mm [2 in.] cubes following the procedure described in Test Method C109/C109M.
  5. According to ASTM C617 5.1.4: The strength Of the capping material shall be determined on receipt of a new lot and at intervals not exceeding three months.
  6. Click Here : CAPSTONE Capping Gypsum


Capping Gypsum Around 30 mins, the strength of the gypsum can reach 5,000~9,000 psi (350~630 kgf/cm2). This type of gypsum is mostly used in the capping material for concrete compression test according to ASTM C617 standard, so our high strength Capping Gypsum the offer the convenient and excellent testing material for civil engineering industry.

Jual Capping Gypsum CAPSTONE di Pantai Indah Kapuk

Capping Strength Perfomance

Product Capping Gypsum Consist Of :

A. Capping Gypsum S-420

S-420 features the high quality and high strength concrete test capping material. It is designated as the most reliable product by many professional testing labs. The high reputation of S -420 raised the demand. Modern buildings such as high-rise construction request S-420 as the minimum strength as qualification.

The water to gypsum ratio for S-420 is recommended to be 21-22%. After simply mixing with water, the gypsum is ready to use immediately and will be fully solidified after approximately 30 minutes and reach the strength over 420 kgf/cm2, Equals to 6000psi.

With Compressive Strength and Maximum Thickness of Capping Materials.

B. Capping Gypsum S-350

S-350 is the most popular concrete capping products of Capstone Series. S-350 provides the best balance of working ability and strength performance for concrete capping.The water and gypsum ratio for S-350 is recommended to be 23-24%. After simply mixing with water, the gypsum can be used immediately and will fully harden in approximately 30 minutes. with strength reaching over 350 kgf/cm2, equals to 5000psi.

With Compressive Strength and Maximum Thickness of Capping Materials.

C. Capping Gypsum S-280

S-280 is the entry level Concrete capping product of the Capstone Series. It provides the basic compressive strength with the lowest price.

The water-gypsum ratio for S-280 is recommended to be 25-26%. After simply mixing with water, the gypsum can be used immediately and will fully harden inapproximately 30 minutes. With strength reaching over 280 kgf/cm2, equals to 4000psi

With Compressive Strength and Maximum Thickness of Capping Materials

According to the regulations of US ASTM C617 standard, it is allowed to use high strength gypsum in capping cylindrical concrete specimens. Compared with other methods, gypsum capping is the most convenient, efficient, rapid, and safest capping method.

Jual Capping Gypsum CAPSTONE di Pantai Indah Kapuk

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 

  • PT. Mora Anugerah Berkat (M.A.B)
  • Click Here : CAPSTONE Capping Gypsum
  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten 
  • Phone : 021 7345.7064
  • Mobile : 0812.8140.0749 / 0812.8770.5470
  • Chat : Whats App,Line,WeChat,Telegram 
  • Website : www.moraanugerah.id -
  •                                     www.moraanugerah.com
  • Email : info@moraanugerah.com -
  •                           info@moraanugerah.id -  
  •                   marketing_div@moraanugerah.com 

 

Jual Murah Mesh Untuk Sieve/Ayakan/Saringan Terlaris di Jakarta



Jual Murah Mesh Untuk Sieve/Ayakan/Saringan Terlaris di Jakarta

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak dalam bidang laboratorium khususnya material testing untuk konstruksi / pertambangan (civil laboratorium testing equipment), peralatan yang kami supply meliputi : alat lab uji tanah (soil test equipment), alat lab uji aggregates (aggregates test equipment), alat lab uji beton (concrete test equipment), alat lab uji sement (cement test equipment), alat lab uji aspal (asphalt test equipment), alat NDT (Non Destructive Test Equipment) dan Alat Survey.

Jual Murah Mesh Untuk Sieve/Ayakan/Saringan Terlaris di Jakarta

                                 


Sieve Test / Ayakan / Mesh (Saringan) adalah peralatan uji gradasi untuk menilai distribusi ukuran partikel dari bahan granular dengan membiarkan sample melewati serangkaian saringan yang semakin kecil ukuran mesh dan menimbang jumlah bahan oleh masing-masing saringan dari yang kecil ke seluruh massa ; Kami PT. Mora Anugerah Berkat Jual Murah Mesh Untuk Sieve/Ayakan/Saringan Terlaris di Jakarta dengan berbagai ukuran dengan diameter 8" (200mm) sampai 18" bahan stainless steel dan brass (kuningan). Untuk katalog bisa kunjungi website kami.


Click Here : Sieve Analyst Catalogue


Standard Method
ISO 3310-1, EN 933-2, BS 410, UNE 7050, DIN 4187-1, UNI 2331, UNI 2333, ASTM E11, ISO 3310-2, NF X11-504 ISO 565.
Jual Murah Mesh Untuk Sieve/Ayakan/Saringan Terlaris di Jakarta

NOMesh
Number
APPERTURENOMesh
Number
APPERTURE
14.25 Inch106 mm24No 121.70 mm
24.00 Inch100 mm25No 141.40 mm
33 ½ Inch90 mm26No 161.18 mm
43 Inch75 mm27No 181.00 mm
52 ½ Inch63 mm28No 20850 μm
62 Inch50 mm29No 25710 μm
71 3/4 Inch45 mm30No 35500 μm
81 ½ Inch37.5 mm31No 40425 μm
91 1/4 Inch31.5 mm32No 45355 μm
101 Inch25 mm33No 50300 μm
117/8 Inch24.4 mm34No 60250 μm
123/4 Inch19 mm35No 70212 μm
135/8 Inch16 mm36No 80180 μm
141/2 Inch12.5 mm37No 100150 μm
153/8 Inch9.5 mm38No 120125 μm
165/16 Inch8.0 mm39No 140106 μm
171/4 Inch6.3 mm40No 17090 μm
18No 44.75 mm41No 20075 μm
19No 54 mm42No 23063 μm
20No 63.35 mm43No 25053 μm
21No 72.80 mm44No 32545 μm
22No 82.36 mm45No 40038 μm
23No 102.00 mm46Pan and Cover


Kami menjual Sieve Analysis/Ayakan Sieve/Saringan Mesh dengan berbagai ukuran baik lokal maupun import seperti (retsch, matest, ele, control and etc) untuk bahan ada brass, alumunium dan steel.


Jual Murah Mesh Untuk Sieve/Ayakan/Saringan Terlaris di Jakarta


Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 

  • PT. Mora Anugerah Berkat [M.A.B]
  • Click Here : Sieve Analyst Catalogue
  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan, Kota Tangerang - Provinsi Banten 
  • Phone : 021 7345.7064 
  • Mobile : 0812.8140.0749 / 0812.8770.5470
  • Chat : Whats App, Line, WeChat, Telegram 
  • Website : www.moraanugerah.id -
  •                   www.moraanugerah.com
  • Email : info@moraanugerah.com -
  • marketing@moraanugerah.com -  
  •                   marketing_div@moraanugerah.com