Tawk.to

PT.Mora Anugerah Berkat adalah perusahaan penyedia alat – alat laboratorium, alat laboratorium yang kami sediakan meliputi : general laboratorium equipment,medical equipment (alat kesehatan), environmental (alat uji lingkungan), chemical/reagent consumable,mineral/civil material testing dan kalibrasi.

No.312-D Digital Taber Type Stiffness Tester

Published On November 12, 2024 By Mora Anugerah Berkat
0 Komentar

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak dalam bidang industrial laboratorium testing equipment khususnya plastik, rubber, film/tape and polymer material testing salah satu diantaranya adalah No.312-D Digital Taber Type Stiffness Tester  , berikut adalah tipe dan spesifikasi dari No.312-D Digital Taber Type Stiffness Tester  seperti di bawah ini :

No.312-D Digital Taber Type Stiffness Tester 

  • No.312-D Digital Taber Type Stiffness Tester
  • Standard Method : JIS-P8125、TAPPI-T489、ISO-2493
  • This tester is used to evaluate the stiffness of paper board according to the load bending method.
  • Fixing one end of the test specimen and bending it 7.5° or 15° at a constant speed.
  • The operator is to acquire the bending moment when the loading length reaches 50 mm.
  • Click Here : Yasuda Seiki No.312-D Digital Taber Type Stiffness Tester Brochure 

ModelNo.312-D DIGITAL TABER TYPE STIFFNESS TESTER
MomentMax. 490 mN⋅m (5,000 gf⋅cm)
Load ScaleLeft-Right 0 to 100
Weight Load100 gf, 200 gf, 500 gf
Load Position100 mm from the Pivot
Bending AngleLeft-Right 15° or 7.5°
Bending Speed180 ± 40°/min
SpecimenW30 to 40 mm (Standard: 38.0 ± 0.2 mm),
L 70 mm, T3.2 mm or Less
Roller
φ8.60 ± 0.05 mm for Test
φ8.93 ± 0.05 mm for Positioning
Power SourceAC 100 V, 1-Phase, 3 A, 50/60 Hz
Dimensions /
Weight (Approx.)		W300 × D350 × H500 mm,
25 kg

=================================

No.312-D Digital Taber Type Stiffness Tester 

=================================

  • No.312 Taber Type Stiffness Tester
  • Standard Method  : JIS-P8125, TAPPI-T489, ISO-2493
  • This is the digital model of the TABER STIFFNESS TESTER where the stiffness of paper board can be directly read.
  • The stiffness level will be indicated in mN-m terms.
  • The tester can also calculate the resistance to bending (mN).
  • Click Here : Yasuda Seiki No.312-D Digital Taber Type Stiffness Tester Brochure 


ModelNo.312 TABER TYPE STIFFNESS TESTER
MomentMax. 490 mN⋅m (5,000 gf⋅cm)
Load ScaleLeft-Right 0 to 100
Weight Load100 gf, 200 gf, 500 gf
Load Position100 mm from the Pivot
Bending AngleLeft-Right 15° or 7.5°
Bending Speed180 ± 40°/min
SpecimenW30 to 40 mm (Standard: 38.0 ± 0.2 mm),
L 70 mm, T3.2 mm or Less
Roller
φ8.60 ± 0.05 mm for Test
φ8.93 ± 0.05 mm for Positioning
Power SourceAC 100 V, 1-Phase, 3 A, 50/60 Hz
Dimensions /
Weight (Approx.)		W300 × D350 × H500 mm,
25 kg

=================================

YASUDA SEIKI
Material : Plastic, Rubber, Tape Film and Polymer
PageNama Alat TestingCode No
1TABER TYPE ABRASION TESTER101
GEER TYPE AGING OVEN102
2WILLIAM TYPE PLASTOMETER105
AUTOMATIC WILLIAM TYPE PLASTOMETER105 AUTO
SCHOPPER TYPE SAMPLE CUTTER115
3OLSEN TYPE STIFFNESS TESTER FOR HEAVY LOAD118
DIGITAL OLSEN TYPE STIFFNESS TESTER FOR HEAVY LOAD118 D
DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER119
DE MATTIA FLEX-CRACKING AND CRACK GROWTH
TESTER WITH LOW TEMP. OVEN		119 L
4DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER WITH LOW TEMP. OVEN (WITH A PICTURE BREAK DETECTION FUNCTION）119- LVR
5MELT FLOW INDEX TESTER120-FWP
FULLY AUTOMATIC MELT FLOW INDEX TESTER120 LABOT-MI
AUTOMATIC MELT FLOW INDEX TESTER120 SAS-2000
6BRITTLENESS TEMPERATURE TESTER121
R BRITTLENESS TEMPERATURE TESTER（WITH REFRIGERATING MACHINE）121
RA BRITTLENESS TEMPERATURE TESTER (ROTARY HOLDER TYPE)121
7FULLY AUTOMATIC BRITTLENESS TEMPERATURE TESTER121 AUTO
TEST TUBE AGING TESTER122
SCHOPPER TYPE THICKNESS GAUGE128/129
8AUTOMATIC CAPILLARY RHEOMETER FOR LIGHT LOAD140-SAS-2002
AUTOMATIC CAPILLARY RHEOMETER FOR HEAVY LOAD140-SAS-2005
9CREEP TESTER FOR LIGHT LOAD145-A
CREEP TESTER FOR HEAVY LOAD145-B
MIXED CREEP TESTER（STRESS RELAXATION TESTER）145-C
10RETENTIVITY TESTER145-D
TR TESTER145-L
SERVOMOTOR TYPE CREEP TESTER145-SVS
11GEHMAN STIFFNESS TESTER145-G
FULLY AUTOMATIC HEAT DISTORTION TESTER148-HDA
HEAT DISTORTION TESTER148-HD-PC
12HIGH TEMPERATURE HEAT DISTORTION TESTER148-HD-500
STRESS-CRACKING TESTER149
LAMBOURN ABRASION TESTER150
13DIN ABRASION TESTER151
DIN ABRASION TESTER WITH OVEN151-OV
14GEL TIME TESTER153
GEL TIME TESTER（CONTINUOUS RECORD TYPE）153
15MARON MECHANICAL STABILITY TESTER156
AUTOMATIC MARON MECHANICAL STABILITY TESTER156-AUTO
FLOOR MATERIAL FATIGUE AND ABRASION TESTER BY CASTER159
16SLIP TESTER162
SLIP TESTER(HORIZONTAL METHOD)162-FS
5 HANGINGS SLIP TESTER162-S5
17O-Y PULL SLIP TESTER162-OY
CLASH-BERG TORSION FLEXIBILITY TESTER170
AUTOMATIC CLASH-BERG TORSION FLEXIBILITY TESTER170-AUTO
COMPRESSION SET TESTER171
18FILM IMPACT TESTER181
FILM IMPACT TESTER WITH LOW TEMP. OVEN181-L
FALLING BALL IMPACT TESTER183
19BALL TACK TESTER183-BT
FALLING DART IMPACT TESTER183-S
MCBURNEY INDENTATION TESTER184-A
RESIDUAL INDENTATION TESTER184-B
20OZONE AGING TESTER187
PLASTIC SAMPLE CUTTING MACHINE189-PAL
AUTOMATIC SAMPLE FORMING MACHINE189-PFA
21NOTCHING MACHINE189-PN
AUTOMATIC NOTCHING MACHINE189-PNA/PNCA
TEST MIXING ROLL191-TM/WM
22ELECTRIC HEATING SYSTEM TEST PRESS196
LUPKE TYPE REBOUND RESILIENCE TESTER200
23YSS HEAT SEALER212
JIS HEAT SEALER213
OXYGEN INDEX FLAMMABILITY TESTER214
24ELECTRIC HEATING SYSTEM MINI TEST PRESS219
DART IMPACT TESTER220
PLASTIC FLAMMABILITY TESTER252-UL-94
25UNIVERSAL IMPACT TESTER258
DIGITAL IMPACT TESTER258-D
IMPACT TESTER WITH LOW TEMP. OVEN258-L
26FULLY AUTOMATIC IMPACT TESTER258-ZA
FOAM RUBBER REPEATED COMPRESSION TESTER260
27ROSS FLEXING TESTER270
ROSS FLEXING TESTER WITH LOW TEMP. OVEN270-LFR
28HEAT SEAL TESTER276
PLASTIC SLIDING ABRASION TESTER283
WILLIAM TYPE ABRASION TESTER275
59DU PONT TYPE FALLING IMPACT TESTER517
DU PONT TYPE FALLING IMPACT TESTER WITH LOW TEMP. OVEN517-L
66ELECTRIC SYSTEM PENCIL SCRATCH HARDNESS TESTER553-M
PENCIL SCRATCH HARDNESS TESTER553
67FULLY AUTOMATIC PENCIL SCRATCH HARDNESS TESTER553-AUTO
PENCIL SCRATCH HARDNESS TESTER (LOADCELL TYPE)553-F
YASUDA SEIKI
Material : Electric Wire Cord Testing Machine
PageNama Alat TestingCode No
1GEER TYPE AGING OVEN102
6BRITTLENESS TEMPERATURE TESTER121
BRITTLENESS TEMPERATURE TESTER
WITH REFRIGERATING MACHINE）		121-R
BRITTLENESS TEMPERATURE TESTER（ROTARY HOLDER TYPE）121-RA
7AUTO FULLY AUTOMATIC BRITTLENESS TEMPERATURE TESTER121 AUTO
29CABTYRE CABLE IMPACT TESTER124
CABTYRE CABLE FLEXING TESTER125
CABTYRE CABLE ABRASION TESTER127
30SPRING ELONGATION TESTER161
ENAMELED WIRE STIFFNESS TESTER163
ENAMELED WIRE SOFTENING POINT TESTER173
31VOLT-ENDURANCE AND DESTRUCTION TESTER175
PARALLEL PLATE PLASTOMETER185
AUTOMATIC PARALLEL PLATE PLASTOMETER185-AUTO
32VOLT-ENDURANCE AND DESTRUCTION TESTER (TWISTPAIR METHOD)204
LOW-VOLTAGE CABLE ABRASION TESTER FOR AUTOMOBILE208
33MAGNET WIRE ABRASION TESTER(RECIPROCATING TYPE210
SCRAPE TESTER（ONE DIRECTION TYPE）215
34ELECTRIC WIRE FLAMMABILITY TESTER252-UL-1581
ELECTRIC RECIPROCATING ABRASION TESTER (PLUG PIN253
PLUG FLEXING TESTER254
35COMPOUND GRINDER255
OUTLET PLUG DURABILITY TESTER256
CABLE BENDING TESTER262
66ELECTRIC SYSTEM PENCIL SCRATCH HARDNESS TESTER553-M
PENCIL SCRATCH HARDNESS TESTER553
67FULLY AUTOMATIC PENCIL SCRATCH HARDNESS TESTER553-AUTO
PENCIL SCRATCH HARDNESS TESTER (LOADCELL TYPE)553-F
YASUDA SEIKI
Material : Pulp and Paper Testing Machine
PageNama Alat TestingCode No
1TABER TYPE ABRASION TESTER101
7SCHOPPER TYPE THICKNESS GAUGE128/129
16SLIP TESTER162
16SLIP TESTER(HORIZONTAL METHOD)162-FS
165 HANGINGS SLIP TESTER162-S5
18FILM IMPACT TESTER181
18FILM IMPACT TESTER WITH LOW TEMP. OVEN181-L
39HANDLE-O-METER226
39MULLEN HIGH-PRESSURE TYPE BURSTING STRENGTH TESTER304-YPH
39MULLEN LOW-PRESSURE TYPE BURSTING STRENGTH TESTER305-YPL
40FPC FLEXING TESTER306
FPC FLEXING TESTER WITH LOW TEMP. OVEN306-L
41MIT TYPE FOLDING ENDURANCE TESTER307
MIT TYPE FOLDING ENDURANCE TESTER LOW TEMP. OVEN307-L
SCHOPPER TYPE FOLDING ENDURANCE TESTER308
42FENCHEL EXPANSION AND CONTRACTION TESTER309
KLEMM CAPILLARY RISE TESTER310
GURLEY TYPE STIFFNESS TESTER311
43TABER TYPE STIFFNESS TESTER312
43DIGITAL TABER TYPE STIFFNESS TESTER312-D
43ELMENDORF TYPE TEARING RESISTANCE TESTER315
43DIGITAL ELMENDORF TYPE TEARING RESISTANCE TESTER315-D
44RING CRUSH TESTER316
44WATER VAPOUR PERMEABILITY CUP318
44AUTOMATIC BEKK SMOOTHNESS TESTER321
45GURLEY TYPE DENSOMETER323
AUTOMATIC GURLEY TYPE DENSOMETER323-AUTO
CANADIAN STANDARD FREENESS TESTER324
46SCHOPPER-RIEGLER TYPE FREENESS TESTER325
PULP SCREENING TESTER330
AUTOMATIC K.B.B. SIZEING TESTER338
47CLARK TYPE STIFFNESS TESTER342
TAPE ADHESION ROLLER349
GURLEY TYPE WATER ABSORPTIVENESS TESTER (COBB METHOD)352
48STANDARD SAMPLE CUTTER353
DOUBLE BLADE SAMPLE CUTTER FOR RING CRUSH TESTER355
CURL-SIZE TESTER360
49WATER VAPOUR PERMEABILITY CHAMBER367
INTERNAL BOND TESTER368
CONTAINER COMPRESSION TESTER371-S
52COLOUR FASTNESS RUBBING TESTER428
YASUDA SEIKI
Material : Yarn , Dyeing , Textile and Garment Testing Machine
PageNama Alat TestingCode No
1TABER TYPE ABRASION TESTER101
7SCHOPPER TYPE SAMPLE CUTTER128/129
36WATER PROOF TESTER169
39HANDLE-O-METER226
42KLEMM CAPILLARY RISE ESTER310
42GURLEY TYPE STIFNESS TESTER311
45GURLEY TYPE DENSOMETER323
AUTOMATIC GURLEY TYPE DENSOMETER323-AUTO
47CLARK TYPE STIFNESS TESTER342
49WATER VAPOUR PERMEABILITY CHAMBER367
50WATER VAPOUR PERMEABILITY CUP FOR TEXTILE401
SPRAY TESTER402
MULLEN TYPE BURSTING STRENGTH TESTER FOR TEXTILE404
51WATER PENETRATION RESISTENCE TESTER FOR TEXTILE409
CROCK METER416
52COLOUR FASTNESS RUBBING TESTER428
OLSEN TYPE STIFFNESS TESTER FOR LIGHT LOAD429
SCOTT TYPE CREASE FLEX ABRASION TESTER433
53FLAMMABILITY TESTER FOR TEXTILE440
VERTICAL FLAMMABILITY TESTER FOR TEXTILE440-B
MVSS FLAMMABILITY TESTER440-S
54ELMENDORF TYPE TEARING RESISTANCE TESTER FOR TEXTILE445
ICI TYPE PILLING TESTER453
45°FLAMMABILITY TESTER FOR TEXTILE455
55ICI TYPE MACE SNAG TESTER473
CANTILEVER TYPE STIFFNESS TESTER476

=================================

PT. Mora Anugerah Berkat (M. A. B) adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan industrial material testing equipment seperti No.312-D Digital Taber Type Stiffness Tester  , kami juga menyediakan peralatan yang sudah teruji dan sesuai dengan standard seperti ASTM, JIS dan lain-lain ; kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China,produk internasional yang kami supply/tawarkan seperti : Yasuda Seiki, Qualitest, Toyoseiki, Drick Instrument, Cometech,Testex Instrument dan lain - lain.

No.312-D Digital Taber Type Stiffness Tester

  • PT. Mora Anugerah Berkat (M.A.B)
  • Click Here : YASUDA SEIKI- Digital Taber Type Stiffness Tester Brochure
  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten
  • Phone : 021 7345.7064
  • Mobile: 0812.8140.0749 / 0812.8770.5470 
  • Chat : Whats App, Line, WeChat, Telegram
  • Website :  www.moraanugerah.id  - 
  •                      www.moraanugerah.com
  • Email : info@moraanugerah.com -
  •                marketing@moraanugerah.com -
  •                marketing_div@moraanugerah.com


Lokasi: Tangerang,Indonesia Jl. Taman Asri Utama No.36, Cipadu, Kec. Larangan, Kota Tangerang, Banten 15154, Indonesia

About author: Mora Anugerah Berkat

Cress arugula peanut tigernut wattle seed kombu parsnip. Lotus root mung bean arugula tigernut horseradish endive yarrow gourd. Radicchio cress avocado garlic quandong collard greens.

0 Komentar:

Langganan: Posting Komentar (Atom)