Tawk.to

PT.Mora Anugerah Berkat adalah perusahaan penyedia alat – alat laboratorium, alat laboratorium yang kami sediakan meliputi : general laboratorium equipment,medical equipment (alat kesehatan), environmental (alat uji lingkungan), chemical/reagent consumable,mineral/civil material testing dan kalibrasi.

Universal Hardness Tester

Published On November 02, 2024 By Mora Anugerah Berkat
0 Komentar

 Universal Hardness Tester

            

Universal Hardness Tester

LD3000AX

Universal hardness testers for Vickers, Rockwell, Superficial Rockwell and Brinell hardness test methods in compliance with ASTM and ISO hardness standards. LD3000AX is a hardness testers for fully automatic test cycles including indentation autoreading through the high resolution camera and the autofocus system. Motorized measuring head and equipped with an automatic turret with indenters and magnification lenses. The instrument allows for hardness measuring in different hardness scales with just one tester, without the need of several testers in own laboratory. Load forces are applied through load cells and electronically controlled in Closed Loop (Pat. Affri). Wide touchscreen for easy test planning and a clear view of results. Statistics and charts are automatically generated and can be stored with test sessions in the large archive. User friendly interface with conversion tables and round correction values for tests on covex cylindrical surfaces or various diameters. Hardness tests on all metals: iron, steel, tempered steel, cast iron, brass, aluminum, copper and metal alloys. Heat treatment, hardening, nitriding, cementation and hardfacing. Knoop test on ceramic and glass materials.


Test Loads :
Variant from 1 to 250 kgf (From 9,807 to 2452 N). Variant from 3 to 3000 kgf (From 29.4 to 29421 N)

Rockwell ISO 6508 / ASTM E-18 :
HRA - HRB - HRC - HRD - HRF - HRG - HRL - HRM - HRR / HRN - HRT

Brinell HBW and HBWT ISO 6506 / ASTM E-10 :
HBW1/30 - HBW2.5/15.625 - HBW2.5/31.25 - HBW2.5/62.5 - HBW2.5/187.5 - HBW5/25 - HRW5/62,5 - HBW5/125 - HBW5/250 - HBW5/750 - HBW10/100 - HBW10/250 - HBW10/500 - HBW10/1000 - HBW10/1500 - HBW10/3000 HBWT2.5/62.5 - HBWT2.5/187.5 - HBWT5/125 - HBWT5/250 - HBWT5/750 - HBWT10/500 - HBWT10/1000 - HBWT10/1500 - HBWT10/3000

Vickers ISO 6507 / ASTM E-384 - Knoop ISO 4545 :
HV1 - HV2 - HV3 - HV5 - HV10 - HV20 - HV30 - HV50 - HV100

Universal Hardness Tester

One Button Hardness Measurement
The hardness tester measuring head moves down until contact is made, applies the force and make the indentation. The software will move to the camera view mode where the indent is automatically measured.

Closed Loop (Pat. Affri)
Closed loop load cells control load forces with a frequency of 1 khz, assuring perfect linearity in every range. Results are not affected by any structural deflection, misalignment or vibration

Motorized Measuring Head
Automatic movements with automatic loading when contact is made. The approach of the head to the sample and not the opposite allows more accurate, scable and safe measurements.

Protected Diamond Indenter
The Affri diamond indenter has a life-span longer tanks to the special protective cup. The indenter retracts and moves down just after the test piece is clamped thereby minimizing the risk to accidental shock.

Clamping System (Pat. AFFRI)
Secure contact with the specimen is always mantained, even in the unlikely event of any specimen movement during the operation cycle. The clamping system assures perfect stability of any test piece throughout the test cycle.

Motorized Turret (Indenter/Objective)
One slot for an indenter and one slot for an objective. Auto-rotating and auto-tool-switching for a complete automatic measurement cycle.

Software LD3000AX
The preinstalled software controls the whole instrument avoiding setting errors or operators mistakes:
Powerful software for test cycle managing and automatic indent reading. Wide settings parameters for measurement setup, image adjustments, statistics and data storage.

Universal Hardness Tester


MODELLD3000AX
StandardsEN-ISO 6506 / EN-ISO 6507 / EN-ISO 6508 / EN-ISO 2039 / EN-ISO 7619 /EN-ISO 868 / ASTM E-103 / ASTM E-18 / ASTM E-10 / ASTM E-384
Height capacity200 - 240 mm / 7.8 - 9.4” (More on request)
Indenter and Clamping
Hood Stroke		Motorized 20 mm / 0.8”
Depth capacity190 mm / 7.4”
ReadingFocus: automatic and manual - Reading: automatic and manual
Preload29.4 - 98.1 N (3 - 10 kgf)
Test loads
LD3000 AX (variant 250) from 1 to 250 kgf
(From 9,807 to 2452 N).
LD3000 AX (variant 3000) from 3 to 3000 kgf
(From 29.4 to 29421 N)
Vickers - Knoop :
9.807 - 19.60 - 29.42 - 49.03 - 98.07 - 196 - 294.2 - 490.35 - 980.7 N
(1 - 2 - 3 - 5 - 10 - 20 - 30 - 50 - 100 kgf)
Brinell : 9.807 - 24.52 - 49.03 - 61.29 - 98.07 - 153.2 - 245.2 - 294.2 - 306.5 - 612.9 - 1226 - 1839 - 2452 - 4903 - 7355 - 9870 - 29421 N)
(1 - 2.5 - 5 - 6.25 - 10 - 15.6 - 25 - 30 - 31.2 - 62.5 - 125 - 187.5 kgf -
250 - 500 - 750 - 1000 - 3000 kgf)
Rockwell : 588.4 - 980.7 - 1471 N (60 - 100 - 150 kgf)
Superficial Rockwell : 147.1 - 294.2 - 441.3 N (15 - 30 - 45 kgf)
Feasible tests
Rockwell : HRC - HRA - HRD - HRB - HRF - HRG - HRL - HRM - HRR
Superficial Rockwell : HRN - HRT
Brinell HBW (Depending on the models) :
HBW1/30 - HBW2.5/15.625 - HBW2.5/31.25 - HBW2.5/62.5 - HBW2.5/187.5 - HBW5/25 - HRW5/62.5 - HBW5/125 - HBW5/250 - HBW5/750 - HBW10/100 - HBW10/250 - HBW10/500 - HBW10/1000 - HBW10/1500 - HBW10/3000
Brinell HBWT (Depending on the models) :
HBT 2.5/62.5 - HBT 2.5/187.5 - HBT 5/125 - HBWT5/250 - HBWT5/750 - HBWT10/500 - HBWT10/1000 - HBWT10/1500 - HBWT10/3000
Vickers (Depending on the models) :
HV1 - HV2 - HV3 - HV5 - HV10 - HV20 - HV30 - HV50 - HV100
Load accuracyBetter than 0.05 %


Kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.

Universal Hardness Tester

  • PT. Mora Anugerah Berkat (M.A.B)
  • Click Here : Universal Hardness Tester Brochure
  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten
  • Phone : 021 7345.7064
  • Mobile: 0812.8140.0749 / 0812.8770.5470 
  • Chat : Whats App, Line, WeChat, Telegram
  • Website :  www.moraanugerah.id  - www.moraanugerah.com
  • Email : info@moraanugerah.com - 
  •              marketing@moraanugerah.com - 
  •              marketing_div@moraanugerah.com

0 Komentar:

Langganan: Postingan (Atom)