Tawk.to

PT.Mora Anugerah Berkat adalah perusahaan penyedia alat – alat laboratorium, alat laboratorium yang kami sediakan meliputi : general laboratorium equipment,medical equipment (alat kesehatan), environmental (alat uji lingkungan), chemical/reagent consumable,mineral/civil material testing dan kalibrasi.

Harga Method of Test No.252-UL-94 [Electric System] Plastic Flammability Testing

flammability charts
Published On Juni 30, 2023 By Mora Anugerah Berkat
0 Komentar

  PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti  : No.252-UL-94 PLASTIC FLAMMABILITY TESTER

Harga Method of Test No.252-UL-94 [Electric System] Plastic Flammability Testing

  • No.252-UL-94 PLASTIC FLAMMABILITY TESTER
  • Standard Method : JIS-K6269, K7201, L1091, ASTM-D2863, ISO-4589-2, Japanese Fire Services Act
  • This tester is used to evaluate the oxygen index flammability of plastic and rubber.
  • The operator is to check the lowest oxygen level (the oxygen level is acquired from a mixture gas of oxygen and nitrogen) that the test specimen is capable to flame inside the flaming column.
  • CLICK HERE : No.252-UL-94 PLASTIC FLAMMABILITY TESTER

Harga Method of Test No.252-UL-94 [Electric System] Plastic Flammability Testing

ModelNo.252-UL-94
(MANUAL)		No.252-UL-94 
 (ELECTRIC SYSTEM)
Chamber1,000 × 555 × 900 mm
(Volume Approx. 0.5 m3)		1,000 × 555 × 900 mm
(Volume Approx. 0.5 m3)
SpecimenL 125 ± 5 mm,
W 13.0 ± 0.5 mm,
T 13 mm or less		L 125 ± 5 mm,
W 13.0 ± 0.5 mm,
T 13 mm or less
BurnerL100 ± 10 mm,
Inner Diameter φ 9.5 ± 0.3 mm		L100 ± 10 mm,
Inner Diameter φ 9.5 ± 0.3 mm
Burner BaseSlide type (With Operation Handle),
Inclination Angle 45 ± 2°, 20 ± 5° (5 V)		Slide type (With Jog Dial type Controller),
Inclination Angle 45 ± 2°, 20 ± 5° (5 V)
Burner
Calibration
Device		Flow Meter :
Max.150 ml/min (Scale 2 ml/min)
(Standard 105 ml/min)

Flow Meter :
Max. 1,000 ml/min (Scale 10 ml/min)
(Standard 965 ml/min)

Manometer :
Max. 200 (± 100) mmH2O
(Scale 1 mmH2O)
(Standard 10 mmH2O)
Timer, Built-In Thermometer		Flow Meter :
Max.150 ml/min (Scale 2 ml/min)
(Standard 105 ml/min)

Flow Meter :
Max. 1,000 ml/min (Scale 10 ml/min)
(Standard 965 ml/min)

Manometer :
Max. 200 (± 100) mmH2O
(Scale 1 mmH2O)
(Standard 10 mmH2O)
Timer, Built-In Thermometer
AccessoriesFlame Gauge (20 mm)
(Option: 125 mm & 38 mm),
Ring Stand,Wire Mesh, Dry Cotton Pad,
Fireproof Gloves, Gas Lighter		Flame Gauge (20 mm)
(Option: 125 mm & 38 mm),
Ring Stand,Wire Mesh, Dry Cotton Pad,
Fireproof Gloves, Gas Lighter
OptionHorizontal Burning Support Fixture (HB),
Plaque Support Fixture (5 V),
Spring Clamp (VTM), Foam Support Fixture		Horizontal Burning Support Fixture (HB),
Plaque Support Fixture (5 V),
Spring Clamp (VTM), Foam Support Fixture
Power SourceAC 100 V, 1-Phase, 15 A, 50/60 HzAC 100 V, 1-Phase, 10 A, 50/60 Hz
Heat SourceMethane Gas (Purity: 98 % Over)Methane Gas (Purity: 98 % Over)
Dimensions / Weight (Approx.)W1,400 × D700 × H1,220 mm 100 kgW1,400 × D700 × H1,220 mm 218 kg


PT. Mora Anugerah Berkat (M. A. B) adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan industrial material testing equipment seperti Harga Method of Test No.252-UL-94 [Electric System] Plastic Flammability Testing , kami juga menyediakan peralatan yang sudah teruji dan sesuai dengan standard seperti ASTM, JIS dan lain-lain ; kami juga menyediakan berbagai brand / merk internasional dari USA, Eropa dan China,produk internasional yang kami supply / tawarkan seperti : Yasuda Seiki, Qualitest, Toyoseiki, Drick Instrument, Cometech,Testex Instrument dan lain - lain. 

Harga Method of Test No.252-UL-94 [Electric System] Plastic Flammability Testing

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 
  • PT. Mora Anugerah Berkat (M.A.B)
  • CLICK HERE : No.252-UL-94 PLASTIC FLAMMABILITY TESTER
  • Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten 
  • Phone : 021 7345.7064 / 7366.0160
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat : Whats App,Line,WeChat,Telegram
  • Website : www.moraanugerah.id - www.moraanugerah.com
  • Email : info@moraanugerah.com - info@moraanugerah.id - marketing_div@moraanugerah.com  


0 Komentar:

Jual Flammability Test of Polymer [No.252-UL-94] YASUDA SEIKI

flammability charts
Published On Juni 30, 2023 By Mora Anugerah Berkat
0 Komentar

  PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti  : No.252-UL-94 PLASTIC FLAMMABILITY TESTER

Jual Flammability Test of Polymer [No.252-UL-94] YASUDA SEIKI

  • No.252-UL-94 PLASTIC FLAMMABILITY TESTER
  • Standard Method : JIS-K6269, K7201, L1091, ASTM-D2863, ISO-4589-2, Japanese Fire Services Act
  • This tester is used to evaluate the oxygen index flammability of plastic and rubber.
  • The operator is to check the lowest oxygen level (the oxygen level is acquired from a mixture gas of oxygen and nitrogen) that the test specimen is capable to flame inside the flaming column.
  • CLICK HERE : No.252-UL-94 PLASTIC FLAMMABILITY TESTER

Jual Flammability Test of Polymer [No.252-UL-94] YASUDA SEIKI

ModelNo.252-UL-94
(MANUAL)		No.252-UL-94 
 (ELECTRIC SYSTEM)
Chamber1,000 × 555 × 900 mm
(Volume Approx. 0.5 m3)		1,000 × 555 × 900 mm
(Volume Approx. 0.5 m3)
SpecimenL 125 ± 5 mm,
W 13.0 ± 0.5 mm,
T 13 mm or less		L 125 ± 5 mm,
W 13.0 ± 0.5 mm,
T 13 mm or less
BurnerL100 ± 10 mm,
Inner Diameter φ 9.5 ± 0.3 mm		L100 ± 10 mm,
Inner Diameter φ 9.5 ± 0.3 mm
Burner BaseSlide type (With Operation Handle),
Inclination Angle 45 ± 2°, 20 ± 5° (5 V)		Slide type (With Jog Dial type Controller),
Inclination Angle 45 ± 2°, 20 ± 5° (5 V)
Burner
Calibration
Device		Flow Meter :
Max.150 ml/min (Scale 2 ml/min)
(Standard 105 ml/min)

Flow Meter :
Max. 1,000 ml/min (Scale 10 ml/min)
(Standard 965 ml/min)

Manometer :
Max. 200 (± 100) mmH2O
(Scale 1 mmH2O)
(Standard 10 mmH2O)
Timer, Built-In Thermometer		Flow Meter :
Max.150 ml/min (Scale 2 ml/min)
(Standard 105 ml/min)

Flow Meter :
Max. 1,000 ml/min (Scale 10 ml/min)
(Standard 965 ml/min)

Manometer :
Max. 200 (± 100) mmH2O
(Scale 1 mmH2O)
(Standard 10 mmH2O)
Timer, Built-In Thermometer
AccessoriesFlame Gauge (20 mm)
(Option: 125 mm & 38 mm),
Ring Stand,Wire Mesh, Dry Cotton Pad,
Fireproof Gloves, Gas Lighter		Flame Gauge (20 mm)
(Option: 125 mm & 38 mm),
Ring Stand,Wire Mesh, Dry Cotton Pad,
Fireproof Gloves, Gas Lighter
OptionHorizontal Burning Support Fixture (HB),
Plaque Support Fixture (5 V),
Spring Clamp (VTM), Foam Support Fixture		Horizontal Burning Support Fixture (HB),
Plaque Support Fixture (5 V),
Spring Clamp (VTM), Foam Support Fixture
Power SourceAC 100 V, 1-Phase, 15 A, 50/60 HzAC 100 V, 1-Phase, 10 A, 50/60 Hz
Heat SourceMethane Gas (Purity: 98 % Over)Methane Gas (Purity: 98 % Over)
Dimensions / Weight (Approx.)W1,400 × D700 × H1,220 mm 100 kgW1,400 × D700 × H1,220 mm 218 kg


PT. Mora Anugerah Berkat (M. A. B) adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan industrial material testing equipment seperti Jual Flammability Test of Polymer [No.252-UL-94] YASUDA SEIKI, kami juga menyediakan peralatan yang sudah teruji dan sesuai dengan standard seperti ASTM, JIS dan lain-lain ; kami juga menyediakan berbagai brand / merk internasional dari USA, Eropa dan China,produk internasional yang kami supply / tawarkan seperti : Yasuda Seiki, Qualitest, Toyoseiki, Drick Instrument, Cometech,Testex Instrument dan lain - lain. 

Jual Flammability Test of Polymer [No.252-UL-94] YASUDA SEIKI

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 
  • PT. Mora Anugerah Berkat (M.A.B)
  • CLICK HERE : No.252-UL-94 PLASTIC FLAMMABILITY TESTER
  • Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten 
  • Phone : 021 7345.7064 / 7366.0160
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat : Whats App,Line,WeChat,Telegram
  • Website : www.moraanugerah.id - www.moraanugerah.com
  • Email : info@moraanugerah.com - info@moraanugerah.id - marketing_div@moraanugerah.com  


0 Komentar:

Jual No.252-UL-94 (MANUAL) PLASTIC FLAMMABILITY TESTER YASUDA SEIKI

flammability charts
Published On Juni 30, 2023 By Mora Anugerah Berkat
0 Komentar

  PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti  : No.252-UL-94 PLASTIC FLAMMABILITY TESTER

Jual No.252-UL-94 (MANUAL) PLASTIC FLAMMABILITY TESTER YASUDA SEIKI

  • No.252-UL-94 PLASTIC FLAMMABILITY TESTER
  • Standard Method : JIS-K6269, K7201, L1091, ASTM-D2863, ISO-4589-2, Japanese Fire Services Act
  • This tester is used to evaluate the oxygen index flammability of plastic and rubber.
  • The operator is to check the lowest oxygen level (the oxygen level is acquired from a mixture gas of oxygen and nitrogen) that the test specimen is capable to flame inside the flaming column.
  • CLICK HERE : No.252-UL-94 PLASTIC FLAMMABILITY TESTER

Jual No.252-UL-94 (MANUAL) PLASTIC FLAMMABILITY TESTER YASUDA SEIKI

ModelNo.252-UL-94
(MANUAL)		No.252-UL-94 
 (ELECTRIC SYSTEM)
Chamber1,000 × 555 × 900 mm
(Volume Approx. 0.5 m3)		1,000 × 555 × 900 mm
(Volume Approx. 0.5 m3)
SpecimenL 125 ± 5 mm,
W 13.0 ± 0.5 mm,
T 13 mm or less		L 125 ± 5 mm,
W 13.0 ± 0.5 mm,
T 13 mm or less
BurnerL100 ± 10 mm,
Inner Diameter φ 9.5 ± 0.3 mm		L100 ± 10 mm,
Inner Diameter φ 9.5 ± 0.3 mm
Burner BaseSlide type (With Operation Handle),
Inclination Angle 45 ± 2°, 20 ± 5° (5 V)		Slide type (With Jog Dial type Controller),
Inclination Angle 45 ± 2°, 20 ± 5° (5 V)
Burner
Calibration
Device		Flow Meter :
Max.150 ml/min (Scale 2 ml/min)
(Standard 105 ml/min)

Flow Meter :
Max. 1,000 ml/min (Scale 10 ml/min)
(Standard 965 ml/min)

Manometer :
Max. 200 (± 100) mmH2O
(Scale 1 mmH2O)
(Standard 10 mmH2O)
Timer, Built-In Thermometer		Flow Meter :
Max.150 ml/min (Scale 2 ml/min)
(Standard 105 ml/min)

Flow Meter :
Max. 1,000 ml/min (Scale 10 ml/min)
(Standard 965 ml/min)

Manometer :
Max. 200 (± 100) mmH2O
(Scale 1 mmH2O)
(Standard 10 mmH2O)
Timer, Built-In Thermometer
AccessoriesFlame Gauge (20 mm)
(Option: 125 mm & 38 mm),
Ring Stand,Wire Mesh, Dry Cotton Pad,
Fireproof Gloves, Gas Lighter		Flame Gauge (20 mm)
(Option: 125 mm & 38 mm),
Ring Stand,Wire Mesh, Dry Cotton Pad,
Fireproof Gloves, Gas Lighter
OptionHorizontal Burning Support Fixture (HB),
Plaque Support Fixture (5 V),
Spring Clamp (VTM), Foam Support Fixture		Horizontal Burning Support Fixture (HB),
Plaque Support Fixture (5 V),
Spring Clamp (VTM), Foam Support Fixture
Power SourceAC 100 V, 1-Phase, 15 A, 50/60 HzAC 100 V, 1-Phase, 10 A, 50/60 Hz
Heat SourceMethane Gas (Purity: 98 % Over)Methane Gas (Purity: 98 % Over)
Dimensions / Weight (Approx.)W1,400 × D700 × H1,220 mm 100 kgW1,400 × D700 × H1,220 mm 218 kg


PT. Mora Anugerah Berkat (M. A. B) adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan industrial material testing equipment seperti Jual No.252-UL-94 (MANUAL) PLASTIC FLAMMABILITY TESTER YASUDA SEIKI, kami juga menyediakan peralatan yang sudah teruji dan sesuai dengan standard seperti ASTM, JIS dan lain-lain ; kami juga menyediakan berbagai brand / merk internasional dari USA, Eropa dan China,produk internasional yang kami supply / tawarkan seperti : Yasuda Seiki, Qualitest, Toyoseiki, Drick Instrument, Cometech,Testex Instrument dan lain - lain. 

Jual No.252-UL-94 (MANUAL) PLASTIC FLAMMABILITY TESTER YASUDA SEIKI

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 
  • PT. Mora Anugerah Berkat (M.A.B)
  • CLICK HERE : No.252-UL-94 PLASTIC FLAMMABILITY TESTER
  • Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten 
  • Phone : 021 7345.7064 / 7366.0160
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat : Whats App,Line,WeChat,Telegram
  • Website : www.moraanugerah.id - www.moraanugerah.com
  • Email : info@moraanugerah.com - info@moraanugerah.id - marketing_div@moraanugerah.com  


0 Komentar:

Harga No.252-UL-94 (ELECTRIC SYSTEM) PLASTIC FLAMMABILITY TESTER YASUDA SEIKI

flammability charts
Published On Juni 30, 2023 By Mora Anugerah Berkat
0 Komentar

  PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti  : No.252-UL-94 PLASTIC FLAMMABILITY TESTER

Harga No.252-UL-94 (ELECTRIC SYSTEM) PLASTIC FLAMMABILITY TESTER YASUDA SEIKI

  • No.252-UL-94 PLASTIC FLAMMABILITY TESTER
  • Standard Method : JIS-K6269, K7201, L1091, ASTM-D2863, ISO-4589-2, Japanese Fire Services Act
  • This tester is used to evaluate the oxygen index flammability of plastic and rubber.
  • The operator is to check the lowest oxygen level (the oxygen level is acquired from a mixture gas of oxygen and nitrogen) that the test specimen is capable to flame inside the flaming column.
  • CLICK HERE : No.252-UL-94 PLASTIC FLAMMABILITY TESTER

Harga No.252-UL-94 (ELECTRIC SYSTEM) PLASTIC FLAMMABILITY TESTER YASUDA SEIKI

ModelNo.252-UL-94
(MANUAL)		No.252-UL-94 
 (ELECTRIC SYSTEM)
Chamber1,000 × 555 × 900 mm
(Volume Approx. 0.5 m3)		1,000 × 555 × 900 mm
(Volume Approx. 0.5 m3)
SpecimenL 125 ± 5 mm,
W 13.0 ± 0.5 mm,
T 13 mm or less		L 125 ± 5 mm,
W 13.0 ± 0.5 mm,
T 13 mm or less
BurnerL100 ± 10 mm,
Inner Diameter φ 9.5 ± 0.3 mm		L100 ± 10 mm,
Inner Diameter φ 9.5 ± 0.3 mm
Burner BaseSlide type (With Operation Handle),
Inclination Angle 45 ± 2°, 20 ± 5° (5 V)		Slide type (With Jog Dial type Controller),
Inclination Angle 45 ± 2°, 20 ± 5° (5 V)
Burner
Calibration
Device		Flow Meter :
Max.150 ml/min (Scale 2 ml/min)
(Standard 105 ml/min)

Flow Meter :
Max. 1,000 ml/min (Scale 10 ml/min)
(Standard 965 ml/min)

Manometer :
Max. 200 (± 100) mmH2O
(Scale 1 mmH2O)
(Standard 10 mmH2O)
Timer, Built-In Thermometer		Flow Meter :
Max.150 ml/min (Scale 2 ml/min)
(Standard 105 ml/min)

Flow Meter :
Max. 1,000 ml/min (Scale 10 ml/min)
(Standard 965 ml/min)

Manometer :
Max. 200 (± 100) mmH2O
(Scale 1 mmH2O)
(Standard 10 mmH2O)
Timer, Built-In Thermometer
AccessoriesFlame Gauge (20 mm)
(Option: 125 mm & 38 mm),
Ring Stand,Wire Mesh, Dry Cotton Pad,
Fireproof Gloves, Gas Lighter		Flame Gauge (20 mm)
(Option: 125 mm & 38 mm),
Ring Stand,Wire Mesh, Dry Cotton Pad,
Fireproof Gloves, Gas Lighter
OptionHorizontal Burning Support Fixture (HB),
Plaque Support Fixture (5 V),
Spring Clamp (VTM), Foam Support Fixture		Horizontal Burning Support Fixture (HB),
Plaque Support Fixture (5 V),
Spring Clamp (VTM), Foam Support Fixture
Power SourceAC 100 V, 1-Phase, 15 A, 50/60 HzAC 100 V, 1-Phase, 10 A, 50/60 Hz
Heat SourceMethane Gas (Purity: 98 % Over)Methane Gas (Purity: 98 % Over)
Dimensions / Weight (Approx.)W1,400 × D700 × H1,220 mm 100 kgW1,400 × D700 × H1,220 mm 218 kg


PT. Mora Anugerah Berkat (M. A. B) adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan industrial material testing equipment seperti Harga No.252-UL-94 (ELECTRIC SYSTEM) PLASTIC FLAMMABILITY TESTER YASUDA SEIKI, kami juga menyediakan peralatan yang sudah teruji dan sesuai dengan standard seperti ASTM, JIS dan lain-lain ; kami juga menyediakan berbagai brand / merk internasional dari USA, Eropa dan China,produk internasional yang kami supply / tawarkan seperti : Yasuda Seiki, Qualitest, Toyoseiki, Drick Instrument, Cometech,Testex Instrument dan lain - lain. 

Harga No.252-UL-94 (ELECTRIC SYSTEM) PLASTIC FLAMMABILITY TESTER YASUDA SEIKI

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 
  • PT. Mora Anugerah Berkat (M.A.B)
  • CLICK HERE : No.252-UL-94 PLASTIC FLAMMABILITY TESTER
  • Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten 
  • Phone : 021 7345.7064 / 7366.0160
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat : Whats App,Line,WeChat,Telegram
  • Website : www.moraanugerah.id - www.moraanugerah.com
  • Email : info@moraanugerah.com - info@moraanugerah.id - marketing_div@moraanugerah.com  


0 Komentar:

Jual [No.252-UL-94] Manual - Plastic Flammability Tester YASUDA SEIKI

flammability charts
Published On Juni 30, 2023 By Mora Anugerah Berkat
0 Komentar

  PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti  : No.252-UL-94 PLASTIC FLAMMABILITY TESTER

Jual [No.252-UL-94] Manual - Plastic Flammability Tester YASUDA SEIKI

  • No.252-UL-94 PLASTIC FLAMMABILITY TESTER
  • Standard Method : JIS-K6269, K7201, L1091, ASTM-D2863, ISO-4589-2, Japanese Fire Services Act
  • This tester is used to evaluate the oxygen index flammability of plastic and rubber.
  • The operator is to check the lowest oxygen level (the oxygen level is acquired from a mixture gas of oxygen and nitrogen) that the test specimen is capable to flame inside the flaming column.
  • CLICK HERE : No.252-UL-94 PLASTIC FLAMMABILITY TESTER

Jual [No.252-UL-94] Manual - Plastic Flammability Tester YASUDA SEIKI

ModelNo.252-UL-94
(MANUAL)		No.252-UL-94 
 (ELECTRIC SYSTEM)
Chamber1,000 × 555 × 900 mm
(Volume Approx. 0.5 m3)		1,000 × 555 × 900 mm
(Volume Approx. 0.5 m3)
SpecimenL 125 ± 5 mm,
W 13.0 ± 0.5 mm,
T 13 mm or less		L 125 ± 5 mm,
W 13.0 ± 0.5 mm,
T 13 mm or less
BurnerL100 ± 10 mm,
Inner Diameter φ 9.5 ± 0.3 mm		L100 ± 10 mm,
Inner Diameter φ 9.5 ± 0.3 mm
Burner BaseSlide type (With Operation Handle),
Inclination Angle 45 ± 2°, 20 ± 5° (5 V)		Slide type (With Jog Dial type Controller),
Inclination Angle 45 ± 2°, 20 ± 5° (5 V)
Burner
Calibration
Device		Flow Meter :
Max.150 ml/min (Scale 2 ml/min)
(Standard 105 ml/min)

Flow Meter :
Max. 1,000 ml/min (Scale 10 ml/min)
(Standard 965 ml/min)

Manometer :
Max. 200 (± 100) mmH2O
(Scale 1 mmH2O)
(Standard 10 mmH2O)
Timer, Built-In Thermometer		Flow Meter :
Max.150 ml/min (Scale 2 ml/min)
(Standard 105 ml/min)

Flow Meter :
Max. 1,000 ml/min (Scale 10 ml/min)
(Standard 965 ml/min)

Manometer :
Max. 200 (± 100) mmH2O
(Scale 1 mmH2O)
(Standard 10 mmH2O)
Timer, Built-In Thermometer
AccessoriesFlame Gauge (20 mm)
(Option: 125 mm & 38 mm),
Ring Stand,Wire Mesh, Dry Cotton Pad,
Fireproof Gloves, Gas Lighter		Flame Gauge (20 mm)
(Option: 125 mm & 38 mm),
Ring Stand,Wire Mesh, Dry Cotton Pad,
Fireproof Gloves, Gas Lighter
OptionHorizontal Burning Support Fixture (HB),
Plaque Support Fixture (5 V),
Spring Clamp (VTM), Foam Support Fixture		Horizontal Burning Support Fixture (HB),
Plaque Support Fixture (5 V),
Spring Clamp (VTM), Foam Support Fixture
Power SourceAC 100 V, 1-Phase, 15 A, 50/60 HzAC 100 V, 1-Phase, 10 A, 50/60 Hz
Heat SourceMethane Gas (Purity: 98 % Over)Methane Gas (Purity: 98 % Over)
Dimensions / Weight (Approx.)W1,400 × D700 × H1,220 mm 100 kgW1,400 × D700 × H1,220 mm 218 kg


PT. Mora Anugerah Berkat (M. A. B) adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan industrial material testing equipment seperti Jual [No.252-UL-94] Manual - Plastic Flammability Tester YASUDA SEIKI, kami juga menyediakan peralatan yang sudah teruji dan sesuai dengan standard seperti ASTM, JIS dan lain-lain ; kami juga menyediakan berbagai brand / merk internasional dari USA, Eropa dan China,produk internasional yang kami supply / tawarkan seperti : Yasuda Seiki, Qualitest, Toyoseiki, Drick Instrument, Cometech,Testex Instrument dan lain - lain. 

Jual [No.252-UL-94] Manual - Plastic Flammability Tester YASUDA SEIKI

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di : 
  • PT. Mora Anugerah Berkat (M.A.B)
  • CLICK HERE : No.252-UL-94 PLASTIC FLAMMABILITY TESTER
  • Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten 
  • Phone : 021 7345.7064 / 7366.0160
  • Mobile : 0812.8140.0749 / 0812.8770.5470 
  • Chat : Whats App,Line,WeChat,Telegram
  • Website : www.moraanugerah.id - www.moraanugerah.com
  • Email : info@moraanugerah.com - info@moraanugerah.id - marketing_div@moraanugerah.com  


0 Komentar:

Langganan: Postingan (Atom)