Tawk.to

PT.Mora Anugerah Berkat adalah perusahaan penyedia alat – alat laboratorium, alat laboratorium yang kami sediakan meliputi : general laboratorium equipment,medical equipment (alat kesehatan), environmental (alat uji lingkungan), chemical/reagent consumable,mineral/civil material testing dan kalibrasi.

About Us

Tampilkan postingan dengan label harga o-y pull slip tester. Tampilkan semua postingan

Alat Uji Slip Resistance Tested di Bekasi

 PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti : Alat Uji Slip Resistance Tested di Bekasi .

Alat Uji Slip Resistance Tested di Bekasi


 

 

 

Alat Uji Slip Resistance Tested di Bekasi 


  • O-Y PULL SLIP TESTER
  • Standard Method : JIS-A1454, A1509-12
  • This tester evaluates the slippage of floor material.
  • The coefficient of slip resistance can be measured by the maximum tensile load at the point when the test specimen and the slip head touch each other.
  • When the test specimen and the slip head touch each other, the slip head is pulled 18° upwards at a prescript load speed to acquire the maximum tensile load for the calculation of the coefficient of slip resistance (C.S.R) As an option, slippage of clay tile can also be tested.
  • In addition to the usual C.S.R, C.S.R-B can also be calculated.
  • Click Here : O-Y Pull Slip Tester Brochure         
  • Plastic,Rubber,Film and Polymer Product Catalog

      Alat Uji Slip Resistance Tested di Bekasi 

      SPECIFICATION O-Y PULL SLIP TESTER
      Specimen100 × 120 mm (Ceramic Tile: 90 × 135 mm)
      Sled80 × 70 mm
      Vertical
      Weight Load      		Initial 294 N (30 kgf) to Max. 785 N (80 kgf)
      (Standard: 785 N)
      Tension Angle18°
      Tension Load
      Measuring      		Load Cell, Max. 5 kN (Scale 1 N)
      Tension
      Load Speed      		785 N/s
      SoftwareWindows Compatible
      OptionSpecimen Holder (Standard and Nosing Edge type),
      Ceramic Tile Spec (with Sled, Testing Powder,
      C.S.R.-B Measuring Software)
      Power SourceAC 100 V, 1-Phase, 10 A, 50/60 Hz
      Dimensions/
      Weight (Approx.)      		Tester Body: W1,500 × D500 × H1,100 mm, 300 kg
      Control Box: W230 × D310 × H210 mm, 5 kg


      Jika anda membutuhkan/mencari alat O-Y Pull Slip Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk Alat Uji Slip Resistance Tested di Bekasi .

      Alat Uji Slip Resistance Tested di Bekasi 

      Harga Electronic Pull Test Machine

      PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti : Electronic Pull Test Machine.

      Harga Electronic Pull Test Machine


       

       

       

      Harga Electronic Pull Test Machine


      • O-Y PULL SLIP TESTER
      • Standard Method : JIS-A1454, A1509-12
      • This tester evaluates the slippage of floor material.
      • The coefficient of slip resistance can be measured by the maximum tensile load at the point when the test specimen and the slip head touch each other.
      • When the test specimen and the slip head touch each other, the slip head is pulled 18° upwards at a prescript load speed to acquire the maximum tensile load for the calculation of the coefficient of slip resistance (C.S.R) As an option, slippage of clay tile can also be tested.
      • In addition to the usual C.S.R, C.S.R-B can also be calculated.
      • Click Here : O-Y Pull Slip Tester Brochure         
      • Plastic,Rubber,Film and Polymer Product Catalog

          Harga Electronic Pull Test Machine

          SPECIFICATION O-Y PULL SLIP TESTER
          Specimen100 × 120 mm (Ceramic Tile: 90 × 135 mm)
          Sled80 × 70 mm
          Vertical
          Weight Load          		Initial 294 N (30 kgf) to Max. 785 N (80 kgf)
          (Standard: 785 N)
          Tension Angle18°
          Tension Load
          Measuring          		Load Cell, Max. 5 kN (Scale 1 N)
          Tension
          Load Speed          		785 N/s
          SoftwareWindows Compatible
          OptionSpecimen Holder (Standard and Nosing Edge type),
          Ceramic Tile Spec (with Sled, Testing Powder,
          C.S.R.-B Measuring Software)
          Power SourceAC 100 V, 1-Phase, 10 A, 50/60 Hz
          Dimensions/
          Weight (Approx.)          		Tester Body: W1,500 × D500 × H1,100 mm, 300 kg
          Control Box: W230 × D310 × H210 mm, 5 kg


          Jika anda membutuhkan/mencari alat O-Y Pull Slip Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk alat uji Electronic Pull Test Machine.

          Harga Electronic Pull Test Machine

          Pull Slipmeter

          PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti : Pull Slipmeter.

          Pull Slipmeter


           

           

           

          Pull Slipmeter


          • O-Y PULL SLIP TESTER
          • Standard Method : JIS-A1454, A1509-12
          • This tester evaluates the slippage of floor material.
          • The coefficient of slip resistance can be measured by the maximum tensile load at the point when the test specimen and the slip head touch each other.
          • When the test specimen and the slip head touch each other, the slip head is pulled 18° upwards at a prescript load speed to acquire the maximum tensile load for the calculation of the coefficient of slip resistance (C.S.R) As an option, slippage of clay tile can also be tested.
          • In addition to the usual C.S.R, C.S.R-B can also be calculated.
          • Click Here : O-Y Pull Slip Tester Brochure         
          • Plastic,Rubber,Film and Polymer Product Catalog

              Pull Slipmeter

              SPECIFICATION O-Y PULL SLIP TESTER
              Specimen100 × 120 mm (Ceramic Tile: 90 × 135 mm)
              Sled80 × 70 mm
              Vertical
              Weight Load              		Initial 294 N (30 kgf) to Max. 785 N (80 kgf)
              (Standard: 785 N)
              Tension Angle18°
              Tension Load
              Measuring              		Load Cell, Max. 5 kN (Scale 1 N)
              Tension
              Load Speed              		785 N/s
              SoftwareWindows Compatible
              OptionSpecimen Holder (Standard and Nosing Edge type),
              Ceramic Tile Spec (with Sled, Testing Powder,
              C.S.R.-B Measuring Software)
              Power SourceAC 100 V, 1-Phase, 10 A, 50/60 Hz
              Dimensions/
              Weight (Approx.)              		Tester Body: W1,500 × D500 × H1,100 mm, 300 kg
              Control Box: W230 × D310 × H210 mm, 5 kg


              Jika anda membutuhkan/mencari alat O-Y Pull Slip Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk alat uji Pull Slipmeter.

              Pull Slipmeter

              Horizontal Pull Slip Meter

              PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti : Horizontal Pull Slip Meter.

              Horizontal Pull Slip Meter


               

               

               

              Horizontal Pull Slip Meter


              • O-Y PULL SLIP TESTER
              • Standard Method : JIS-A1454, A1509-12
              • This tester evaluates the slippage of floor material.
              • The coefficient of slip resistance can be measured by the maximum tensile load at the point when the test specimen and the slip head touch each other.
              • When the test specimen and the slip head touch each other, the slip head is pulled 18° upwards at a prescript load speed to acquire the maximum tensile load for the calculation of the coefficient of slip resistance (C.S.R) As an option, slippage of clay tile can also be tested.
              • In addition to the usual C.S.R, C.S.R-B can also be calculated.
              • Click Here : O-Y Pull Slip Tester Brochure         
              • Plastic,Rubber,Film and Polymer Product Catalog

                  Horizontal Pull Slip Meter

                  SPECIFICATION O-Y PULL SLIP TESTER
                  Specimen100 × 120 mm (Ceramic Tile: 90 × 135 mm)
                  Sled80 × 70 mm
                  Vertical
                  Weight Load                  		Initial 294 N (30 kgf) to Max. 785 N (80 kgf)
                  (Standard: 785 N)
                  Tension Angle18°
                  Tension Load
                  Measuring                  		Load Cell, Max. 5 kN (Scale 1 N)
                  Tension
                  Load Speed                  		785 N/s
                  SoftwareWindows Compatible
                  OptionSpecimen Holder (Standard and Nosing Edge type),
                  Ceramic Tile Spec (with Sled, Testing Powder,
                  C.S.R.-B Measuring Software)
                  Power SourceAC 100 V, 1-Phase, 10 A, 50/60 Hz
                  Dimensions/
                  Weight (Approx.)                  		Tester Body: W1,500 × D500 × H1,100 mm, 300 kg
                  Control Box: W230 × D310 × H210 mm, 5 kg


                  Jika anda membutuhkan/mencari alat O-Y Pull Slip Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk alat uji Horizontal Pull Slip Meter.

                  Horizontal Pull Slip Meter

                  Horizontal Pull Slipmeter Machine

                  PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti : Lambourn Abrasion Tester.

                  Horizontal Pull Slipmeter Machine


                   

                   

                   

                  Horizontal Pull Slipmeter Machine


                  • O-Y PULL SLIP TESTER
                  • Standard Method : JIS-A1454, A1509-12
                  • This tester evaluates the slippage of floor material.
                  • The coefficient of slip resistance can be measured by the maximum tensile load at the point when the test specimen and the slip head touch each other.
                  • When the test specimen and the slip head touch each other, the slip head is pulled 18° upwards at a prescript load speed to acquire the maximum tensile load for the calculation of the coefficient of slip resistance (C.S.R) As an option, slippage of clay tile can also be tested.
                  • In addition to the usual C.S.R, C.S.R-B can also be calculated.
                  • Click Here : O-Y Pull Slip Tester Brochure         
                  • Plastic,Rubber,Film and Polymer Product Catalog

                      Horizontal Pull Slipmeter Machine

                      SPECIFICATION O-Y PULL SLIP TESTER
                      Specimen100 × 120 mm (Ceramic Tile: 90 × 135 mm)
                      Sled80 × 70 mm
                      Vertical
                      Weight Load                      		Initial 294 N (30 kgf) to Max. 785 N (80 kgf)
                      (Standard: 785 N)
                      Tension Angle18°
                      Tension Load
                      Measuring                      		Load Cell, Max. 5 kN (Scale 1 N)
                      Tension
                      Load Speed                      		785 N/s
                      SoftwareWindows Compatible
                      OptionSpecimen Holder (Standard and Nosing Edge type),
                      Ceramic Tile Spec (with Sled, Testing Powder,
                      C.S.R.-B Measuring Software)
                      Power SourceAC 100 V, 1-Phase, 10 A, 50/60 Hz
                      Dimensions/
                      Weight (Approx.)                      		Tester Body: W1,500 × D500 × H1,100 mm, 300 kg
                      Control Box: W230 × D310 × H210 mm, 5 kg


                      Jika anda membutuhkan/mencari alat O-Y Pull Slip Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk alat uji Horizontal Pull Slipmeter Machine.

                      Horizontal Pull Slipmeter Machine

                      Slip Resistance Testing : O-Y Pull Slip Tester

                      PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti : Slip Resistance Testing : O-Y Pull Slip Tester.

                      Slip Resistance Testing : O-Y Pull Slip Tester


                       

                       

                       

                      Slip Resistance Testing : O-Y Pull Slip Tester


                      • O-Y PULL SLIP TESTER
                      • Standard Method : JIS-A1454, A1509-12
                      • This tester evaluates the slippage of floor material.
                      • The coefficient of slip resistance can be measured by the maximum tensile load at the point when the test specimen and the slip head touch each other.
                      • When the test specimen and the slip head touch each other, the slip head is pulled 18° upwards at a prescript load speed to acquire the maximum tensile load for the calculation of the coefficient of slip resistance (C.S.R) As an option, slippage of clay tile can also be tested.
                      • In addition to the usual C.S.R, C.S.R-B can also be calculated.
                      • Click Here : O-Y Pull Slip Tester Brochure         
                      • Plastic,Rubber,Film and Polymer Product Catalog

                          Slip Resistance Testing : O-Y Pull Slip Tester

                          SPECIFICATION O-Y PULL SLIP TESTER
                          Specimen100 × 120 mm (Ceramic Tile: 90 × 135 mm)
                          Sled80 × 70 mm
                          Vertical
                          Weight Load                          		Initial 294 N (30 kgf) to Max. 785 N (80 kgf)
                          (Standard: 785 N)
                          Tension Angle18°
                          Tension Load
                          Measuring                          		Load Cell, Max. 5 kN (Scale 1 N)
                          Tension
                          Load Speed                          		785 N/s
                          SoftwareWindows Compatible
                          OptionSpecimen Holder (Standard and Nosing Edge type),
                          Ceramic Tile Spec (with Sled, Testing Powder,
                          C.S.R.-B Measuring Software)
                          Power SourceAC 100 V, 1-Phase, 10 A, 50/60 Hz
                          Dimensions/
                          Weight (Approx.)                          		Tester Body: W1,500 × D500 × H1,100 mm, 300 kg
                          Control Box: W230 × D310 × H210 mm, 5 kg


                          Jika anda membutuhkan/mencari alat O-Y Pull Slip Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk alat uji Slip Resistance Testing : O-Y Pull Slip Tester.

                          Slip Resistance Testing : O-Y Pull Slip Tester
                          Langganan: Postingan (Atom)