Tawk.to

PT.Mora Anugerah Berkat adalah perusahaan penyedia alat – alat laboratorium, alat laboratorium yang kami sediakan meliputi : general laboratorium equipment,medical equipment (alat kesehatan), environmental (alat uji lingkungan), chemical/reagent consumable,mineral/civil material testing dan kalibrasi.

About Us

Tampilkan postingan dengan label Plastic & Rubber Test. Tampilkan semua postingan

FALLING BALL IMPACT TESTER


PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat material testing equipment khusus industrial testing seperti pengujian plastic, rubber, film/tape dan polymer salah satu diantaranya yang kami supply adalah Falling Ball Impact Test. 

FALLING BALL IMPACT TESTER

  • No.183 Falling Ball Impact Tester
  • Standard Method : JIS-(K5400), K5600-5-3, (K6718), (K6745), K7211, ISO-6272
  • This tester is used to evaluate the impact resistance of rigid plastic, coating etc.
  • The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.

SPECIFICATION
No.183 FALLING BALL IMPACT TESTER

Falling Height

50 to Max. 1,000 mm (Pitch 50 mm)

50 to Max. 2,000 mm (Pitch 50 mm)

Falling Weight

Depends on the Standards

Specimen Holder

Depends on the Standards

Accessories

Spirit Level: 1 pc, Foot Switch

Power Source

AC 100 V, 1-Phase, 3 A, 50/60 Hz

Dimensions /

Tester Body: W660 × D460 × H2,

000 to 2,500 mm,

Weight (Approx.)

100 to 115 kg

Control Box: W200 × D280 × H215 mm, 7 kg


  • No.181 FILM IMPACT TESTER
  • Standard Method : ASTM-D3420
  • This tester is used to evaluate the impact resistance of rigid plastic, coating etc.
  • The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.

FALLING BALL IMPACT TESTER

  • No.181-L FILM IMPACT TESTER (With Refrigerating Machine)
  • Standard Method : ASTM-D3420
  • This tester is used to evaluate the impact hole punching endurance of plastic film, paper etc.
  • A hemispherical impact ball is attached to the head of the pendulum so that the impact workload to punch a hole into the test specimen can be directly read on the scale.
  • The tester can also be assorted with a low temperature chamber to conduct the impact test at low temperature.


SPECIFICATION FILM IMPACT TESTER
ModelNO.181
FILM IMPACT TESTER		NO.181-L FILM IMPACT TESTER
(WITH REFRIGERATING MACHINE)
Capacity0 to 1.5 J (Scale 0.05 J),0 to 3.0 J (Scale 0.1 J)
(2 ranges)
0 to 3.0 J (Scale 0.1 J), 0 to 6.0 J (Scale 0.2 J)		0 to 1.5 J (Scale 0.05 J),0 to 3.0 J (Scale 0.1 J)
(2 ranges)
0 to 3.0 J (Scale 0.1 J),0 to 6.0 J (Scale 0.2 J)
Impact HeadHemispherical shape, R12.7 mm, R6.35 mmHemispherical shape, R12.7 mm, R6.35 mm
Lift-Up Angle90° (Additional Weight type)60°, 90° (2 Stage Type)
Specimenφ80 mmφ80 mm
ClampInner φ60 mmInner φ60 mm
Temperature Range―-35 °C to 60 °C (Refrigerator)
OptionDigital Display Ver.Digital Display Ver.
Power Source―AC 200 V, 3-Phase, 20 A, 50/60 Hz
Dimensions / Weight
(Approx.)		W600 × D190 × H460 mm, 32 kgW1,080 × D700 × H930 mm, 150 kg

Jika anda membutuhkan/mencari alat Falling Ball Impact Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap memjawab segala kebutuhan anda khususnya untuk alat uji Falling Ball Impact Testing Machine.

FALLING BALL IMPACT TESTER

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :

FILM IMPACT TESTER


        FILM IMPACT TESTER



Standard

ASTM-D3420

This tester is used to evaluate the impact hole punching endurance of plastic film, paper etc. A hemispherical impact ball is attached to the head of the pendulum so that the impact workload to punch a hole into the test specimen can be directly read on the scale. The tester can also be assorted with a low temperature chamber to conduct the impact test at low temperature.

     FILM IMPACT TESTER (WITH REFRIGERATING MACHINE)
    Standard

ASTM-D3420
This tester can also be prepared with a low temperature chamber in order to conduct the test at low temperature

FOAM RUBBER REPETITIVE COMPRESSION TESTER

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak dalam bidang industrial laboratorium testing equipment khususnya plastik, rubber, film/tape and polymer material testing salah satu diantaranya adalah Rotary Abrasion Tester, berikut adalah tipe dan spesifikasi dari Rotary Abrasion Testing seperti di bawah ini : 

FOAM RUBBER REPETITIVE COMPRESSION TESTER

  • No.260 FOAM RUBBER REPETITIVE COMPRESSION TESTER
  • Standard Method : JIS-(K6382), K6400-4
  • This tester is used to repeatedly test compression residual strain of polyurethane foam and latex foam soft material according to the constant displacement method.
  • Placing the test specimen between the two parallel plates and continuously repeating the compression to the test specimen 80,000 times at a compressing power so that the test specimen’s thickness becomes 50 % of the initial size. 30 minutes after the test specimen has been repeatedly compressed, the decreasing rate of the test specimen’s thickness is to be measured.
  • CLICK HERE : No.260 Foam Rubber Repetitive Compression Test Brochure
FOAM RUBBER REPETITIVE COMPRESSION TESTER

No.260 FOAM RUBBER REPETITIVE COMPRESSION TESTER
Specification
Hanging2 Hangings
SpecimenT20 mm or More,
Width or Length 50 mm or More
Compression
Platen		310 × 310 mm, Vent φ6 mm
(Pitch 20 mm)
Compression
Stroke		10 to 100 mm
(2 Lines Adjustable)
Compression
Speed		60 times/min
Counter6 Digits Preset Counter
OptionSafety Cover
Power
Source		AC 100 V, 1-Phase,
15 A, 50/60 Hz
Dimensions / Weight
(Approx.)		W900 × D600 × H1,050 mm /
170 kg

 

PT. Mora Anugerah Berkat (M. A. B) adalah perusahaan yang sudah berpengalaman dalam menyediakan / mensupply peralatan industrial material testing equipment seperti FOAM RUBBER REPETITIVE COMPRESSION TESTER , kami juga menyediakan peralatan yang sudah teruji dan sesuai dengan standard seperti ASTM, JIS dan lain-lain ; kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China,produk internasional yang kami supply/tawarkan seperti : Yasuda Seiki, Qualitest, Toyoseiki, Drick Instrument, Cometech,Testex Instrument  dan lain - lain.


FOAM RUBBER REPETITIVE COMPRESSION TESTER


Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :
  • PT. Mora Anugerah Berkat [M.A.B]
  • CLICK HERE : No.260 Foam Rubber Repetitive Compression Test Brochure
  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten
  • Phone : 021 7345.7064 / 7366.0160
  • Mobile : 0812.8140.0749 / 0812.8770.5470
  • CHATS : Whats App, Line, WeChat, Telegram
  • Website: www.moraanugerah.id - www.moraanugerah.com
  • Email : info@moraanugerah.com - info@moraanugerah.id - marketing_div@moraanugerah.com - marketing@moraanugerah.com

UNIVERSAL IMPACT TESTER and UNIVERSAL MATERIAL TESTER


UNIVERSAL IMPACT TESTER





Standard

JIS-K7111 # ASTM-D256 # D6110 # ISO-179 # 180

This pendulum type Charpy impact tester can automatically conduct the test cycle, and is capable of testing at extremely low temperatures (as low as -70°C). Test conditions are inputted via touch screen and a maximum of 210 specimens can be tested continuously. Due to the high capability of the refrigerating system, it is both time and cost efficient when compared to any other model.

   UNIVERSAL MATERIAL TESTER



Capable of Testing Strain, Compression, and 3 Point Bending
This universal tensile elongation/ compression tester (Auto Strain/ Strograph) is best suited for plastic and rubber. The tester capacity comes in either a maximum of 5 kN or 10 kN respectively. The test specimen is attached to chucks on both ends and is applied elongation/ compression force continuously through loadcell until breakage. Tester control and tensile strength calculation are both conducted via touch panel interface.

Untuk Infromasi dan Pemesanan Silahkan Kunjungi dan Hubungi Kami Di
PT.Mora Anugerah Berkat
Ph.+62 21 7345 7064/7366 0160
Fax.+62 21 7366 0160
Mobile :
0812 8770 5470 (What Apps,Line,We Chat,Telegram)
0812 8140 0749 (What Apps,Line,We Chat,Telegram)
Website :
www.moraanugerah.id
Email :
info@moraanugerah.id
mora.anugerahberkat@gmail.com 

CREEP TESTER TYPE

 

CREEP TESTER TYPE

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti : CREEP TESTER TYPE .

CREEP TESTER TYPE 

  • No.145-A/No.145-B CREEP TESTER (PULLEY TYPE/ BALANCE TYPE)

  • Standard Method : JIS-K7115, ASTM-D2990, ISO-899-1

  • This tester is used to measure the increasing creep by applying static load to plastic test specimens.

  • By choosing the Chuck, the tester enables to conduct tensile test, condensation test, and bending test.

  • The tester can also be assorted with test functions such as relaxation test, heat shrinkage test, and thermal impulse test.

  • Click Here : CREEP TESTER (PULLEY TYPE/BALANCE TYPE)


CREEP TESTER (PULLEY TYPE/ BALANCE TYPE)
ModelCREEP TESTER (PULLEY TYPE)
Hangings3, 6, or 10 Hangings (3 kinds)
SpecimenSee JIS-K7162 for reference JIS-K7162
Load MethodPulley Wheel Type
Weight LoadMax. 500 N （50 kgf）
Displacement
Measurement		Potentiometer :
Scale 0.1 mm, Stroke 0 to Max. 300 mm
Differential Transformer :
Scale 0.01 mm, Stroke 0 to Max. ± 40 mm
Temperature
Range		Max. 200 °C
SoftwareWindows Compatible
OptionCompression Jig, Bending Jig, Low Temperature Oven,
Constant Temperature & Humidity Oven, Divided Oven,
Liquid Immersion Bath, Gauge Length Measuring Spec,
Weight Traveling System (WTS)
Power SourceDiffer by Specifications.
Dimensions /
Weight (Approx.)		Differ by Specifications.
CREEP TESTER (PULLEY TYPE/ BALANCE TYPE)
ModelCREEP TESTER (BALANCE TYPE)
Hangings3, 6, or 10 Hangings (3 kinds)
SpecimenSee JIS-K7162 for reference JIS-K7162
Load MethodBalance Scale Type
Weight LoadMax. 5 kN （500 kgf）
Displacement
Measurement		Differential Transformer :
Scale 0.01 mm, Stroke 0 to Max. ± 40 mm
Temperature
Range		Max. 200 °C
SoftwareWindows Compatible
OptionCompression Jig, Bending Jig, Low Temperature Oven,Constant Temperature & Humidity Oven, Divided Oven,Liquid Immersion Bath, Gauge Length Measuring Spec,Weight Traveling System (WTS)
Power SourceDiffer by Specifications.
Dimensions /
Weight (Approx.)		Differ by Specifications.

==========================

  • No.145-SV CREEP TESTER (SERVOMOTOR TYPE)

  • Standard Method : JIS-K7115, ASTM-D2990, ISO-899-1(CREEP TEST), JIS-K6263, ISO-3384(STRESS RELAXATION TEST)

  • Adding a servomotor to the usual actual load type creep tester, and detecting the load using a load cell, the servomotor type creep tester can effectively reduce impact when the test specimen breaks, simultaneously saving space.

  • By choosing the Chuck, the tester enables conducting tensile stress relaxation tests and the condensation stress relaxation test.

  • The tester can also be assorted with test functions such as thermal contraction testing and thermal impact testing.

  • CLICK HERE : CREEP TESTER (SERVOMOTOR TYPE)



CREEP TESTER (SERVOMOTOR TYPE)
Specification
Hangings3, 6, or 10 Hangings (3 kinds)
SpecimenSee JIS-K7162 or JIS-K6263 for reference
Load MethodServomotor Type
Weight LoadMax. 5 kN (500 kgf)
Load DetectionLoad Cell
Displacement
Measurement		Potentionmeter :
Scale 0.1 mm, Stroke 0 to Max. 300 mm
Differential Transformer :
0.01 mm, Stroke 0 to Max. ± 40 mm
Temperature
Range		Max. 200 °C
SoftwareWindows Compatible
OptionCompression Jig, Bending Jig, Low Temperature Oven, Constant Temperature & Humidity Oven, Divided Oven, Liquid Immersion Bath, Gauge Length Measuring Spec
Power SourceDiffer by Specifications.
Dimensions /
Weight (Approx.)		Differ by Specifications.

==========================

  • HYBRID CREEP TESTER (STRESS RELAXATION TESTER)

  • Standard Method : JIS-K7115, ASTM-D2990, ISO-899-1(CREEP TEST), JIS-K6263, ISO-3384(STRESS RELAXATION TEST)

  • By equipping a load cell to the usual CREEP TESTER, this tester enables to test stress relaxation of vulcanized rubber and thermoplastic rubber.

  • By choosing the Chuck, the tester enables to conduct the tensile stress relaxation test and the condensation stress relaxation test.

  • The tester can also be assorted with test functions such as heat shrinkage test and thermal impulse test.

  • Click Here : HYBRID CREEP TESTER (STRESS RELAXATION TESTER)



HYBRID CREEP TESTER (STRESS RELAXATION TESTER)
Specification
Hangings3, 6 or 10 Hangings, (3 kinds)
SpecimenSee JIS-K6263 for reference
Load MethodPulley Wheel Type or Balance Scale Type
Load MeasuringLoad Cell, Max. 500 N (50 kgf)
Displacement
Measurement		Potentionmeter :
Scale 0.1 mm, Stroke 0 to Max.
Differential Transformer :
Scale 0.01 mm, Stroke 0 to Max. ± 40 mm
Temperature
Range		Max. 200 °C
SoftwareWindows Compatible
OptionCompression Jig, Bending Jig, Low Temperature Oven,
Constant Temperature & Humidity Oven, Divided Oven,
Liquid Immersion Bath, Gauge Length Measuring Spec
Power SourceDiffer by Specifications.
Dimensions / Weight 
(Approx.)		Differ by Specifications.

Jika anda membutuhkan/mencari alat CREEP TESTER TYPE . yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap memjawab segala kebutuhan anda khususnya untuk alat uji Creep Test.

CREEP TESTER TYPE

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :

  • PT. Mora Anugerah Berkat (M.A.B)

  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten

  • Phone : 021 7345.7064 / 7366.0160

  • Mobile : 0812.8140.0749 / 0812.8770.5470 

  • Chat : Whats App, Line, WeChat, Telegram

  • Website : www.moraanugerah.id  -  www.moraanugerah.com

  • Email : info@moraanugerah.com - info@moraanugerah.id - marketing_div@moraanugerah.com
Langganan: Postingan (Atom)