FAITHFUL [WHLL-30BE] Constant-Temperature Drying Oven

While a CO2 incubator is all about nurturing life, a Constant-Temperature Drying Oven is essentially its industrial-strength cousin designed for removal and stabilization. In the lab or factory, these ovens are used to remove moisture from samples, sterilize equipment, or "cure" materials at a steady, elevated temperature ; Unlike a standard kitchen oven, which can have massive temperature swings, these units are designed for thermal uniformity. They use a PID (Proportional-Integral-Derivative) controller to ensure that if you set it to 100°C, every corner of the oven stays exactly at 100°C Constant-temperature Drying Oven.

FAITHFUL [WHLL-30BE] Constant-Temperature Drying Oven

Product Characteristics

1. In the workroom, the hot air is convective naturally and cyclically.
2. PID micro-computer intelligent temperature controller with functions of over-temperature protection.
3. Standard highlight LED instrument running light.
4. New anti-hot handle.
5. Click Here : PT. Mora Anugerah Berkat sudah terdaftar di E-Katalog LKPP INAPROC

WHLL-BE series have the following characteristics other than the above functions.

1. LCD temperature controller.
2. Over-temperature protection system.
3. High precision digital independent temperature limiter.
4. Click Here : FAITHFUL Constant-Temperature Drying Oven Brochure

FAITHFUL [WHLL-30BE] Constant-Temperature Drying Oven

Model		WHL-30B	WHL-45B	WHL-65B
		WHLL-30BE	WHLL-45BE	WHLL-65BE
Cycle Mode		Natural Convection
Function	Temp. Range	RT+10-300℃
	Temp.Resolution Ratio	0.1℃
	Temp Motion	±1℃
	Temp Uniformity	±3.5%
Structure	Inner Chamber	Mirror Stainless Steel
	Outer Shell	Cold rolling steel electrostatic spraying exterior
	Insulation layer	High quaility rock wool board (with CE)
	Heater	Stainless steel heater
	Power Rating	0.8kW	1.2kW	1.6kW
	Exhaust Hole	φ28mm top (with function of test hole)
Controller	Temp. Control Mode	Two temperature section PID intelligent
	Temp. Setting Mode	Touch button setting
	Temp. Display Mode	B Model : display on LED | BE Model : display on upper LCD
	Timer	0-9999min(with timing wait function)
	Operation Function	Fixed temperature operation, timing function, auto stop.
	Additional Function	B Model : Sensor deviation correction, temperature overshoot self-tuning, internal parameter locking, power-off parameter memory
		BE Model : High precision digital independent temperature limiter, sensor deviation correction, temperature overshoot self-tuning, internal parameter locking, power-off parameter memory
	Sensor	pt100
Specification	Inner Chamber Size (W*L*H)(mm)	310 x 310 x 310	350 x 350 x 350	400 x 360 x 450
	Exterior Size (W*L*H)(mm)	460 x 510 x 695	500 x 550 x 735	550 x 550 x 840
	Packing Size (W*L*H)(mm)	550 x 585 x 845	590 x 625 x 885	640 x 635 x 985
	Volume	30L	45L	65L
	Shelf Number	6	7	9
	Load per Rack	15kg
	Shelf Space	35mm
	(50/60HZ) Current Rating	AC220V/ 3.6A	AC220V/ 5.5A	AC220V/ 7.2A
	NW/GW (kg）	33/37	37/43	44/49
Accessory	Shelf	2
	Shelf frame	4
Optional Accessories		B Model : Shelf ; BE Model : Shelf, RS485 interface, printer, program temperature control device, remote control,wireless SMS alarm, USB data storage
Model		WHL-85B	WHL-125B
		WHLL-85BE	WHLL-125BE
Cycle Mode		Natural Convection
Function	Temp. Range	RT+10-300℃
	Temp.Resolution Ratio	0.1℃
	Temp Motion	±1℃
	Temp Uniformity	±3.5%
Structure	Inner Chamber	Mirror Stainless Steel
	Outer Shell	Cold rolling steel electrostatic spraying exterior
	Insulation Layer	High quaility rock wool board (with CE)
	Heater	Stainless steel heater
	Power Rating	2.0kW	2.5kW
	Exhaust Hole	φ28mm top (with function of test hole)
Controller	Temp. Control Mode	Two temperature section PID intelligent
	Temp. Setting Mode	Touch button setting
	Temp. Display Mode	B Model : display on LED | BE Model : display on upper LCD
	Timer	0-9999min(with timing wait function)
	Operation Function	Fixed temperature operation, timing function, auto stop.
	Additional Function	B Model : Sensor deviation correction, temperature overshoot self-tuning, internal parameter locking, power-off parameter memory
		BE Model : High precision digital independent temperature limiter, sensor deviation correction, temperature overshoot self-tuning, internal parameter locking, power-off parameter memory
	Sensor	pt100
Specification	Inner Chamber Size (W*L*H)(mm)	450*420 *450	500*450 *550
	Exterior Size (W*L*H)(mm)	590*610 *830	636*680 *915
	Packing Size (W*L*H)(mm)	690*695 *985	740*725 *1085
	Volume	85L	125L
	Shelf Number	9	13
	Load per Rack	15kg	15kg
	Shelf Space	35mm	35mm
	(50/60HZ) Current Rating	AC220V/ 10.5A	AC220V/ 10.5A
	NW/GW (kg）	60/66	60/66
Accessory	Shelf	2
	Shelf frame	4
Optional Accessories		B Model : Shelf ; BE Model : Shelf, RS485 interface, printer, program temperature control device, remote control,wireless SMS alarm, USB data storage

Applications

• -> Sample Drying : Removing water from biological or environmental samples before weighing (essential for "dry weight" biomass measurements).
• -> Glassware Sterilization : Using "dry heat" to kill microorganisms on lab equipment.
• -> Material Testing : Aging plastics or electronics at high heat to see when they fail.
• -> Curing : Hardening epoxies, glues, or specialized coatings in manufacturing

PT. Mora Anugerah Berkat adalah perusahaan yang sudah berpengalaman dalam menyediakan / mensupply peralatan general laboratorium equipment dan analysis equipment seperti FAITHFUL [WHLL-30BE] Constant-Temperature Drying Oven
 , kami juga menyediakan peralatan baik lokal maupun custom (khusus) yang sudah teruji dan sesuai dengan ASTM,kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China,produk internasional yang kami supply / tawarkan seperti : Thermo Fisher Scientific, Memmert, Labtron, Carbolite, Faithful, Sciteq dan lain - lain ; Kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.

FAITHFUL [WHLL-30BE] Constant-Temperature Drying Oven

PT. Mora Anugerah Berkat (M.A.B)
Click Here : FAITHFUL Constant-Temperature Drying Oven Brochure
Click Here : PT. Mora Anugerah Berkat sudah terdaftar di E-Katalog LKPP INAPROC
Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten
Phone : 021 7345.7064
Mobile/HP : 0812.8140.0749 / 0812.8770.5470
Chat : Whats App, Line, WeChat, Telegram
Website : www.moraanugerah.id - www.moraanugerah.com
Email : info@moraanugerah.com - marketing@moraanugerah.com - marketing_div@moraanugerah.com